Accessories

Emergency Tow Strap - 10,000lb CapacityThis emergency tow strap is a must have if your boat becomes inoperable. The fluorescent orange bag for storage can also be used to wave down help or as a backup if you're required to have an orange flag for...

 Power Pole Cover f/Pro Series & Sportsman 8' Models OnlyPower Pole protective travel cover made of 1800 denier polyester PVC coated black fabric. The PVC coated inside assures that the cover will not scratch the finish while protecting the...

Threaded Upper Antenna Support AssemblyIncludes forged aluminum "yoke' with 7/8-14 thread (09-1260-23),  2-piece Antenna collar (09-1258-2PC) for 1.5" OD ANTENNAS and black anodized Jam nut (03-1103-23). Select antenna collar option in drop-down...

41156 Bulb Warm White *6-PackSpecifications:Festoon 360°Length: 30mm (1 1/4") Lumen: 115Volts: 12V ONLYLEDs: 8 SMD5050Amps: 0.1Watts: 1.2Beam Angle: 360°Color: Warm White6-Pack

ATMOS 12V Integrated Air StationRevolutionize your boating experience. Scanstrut's built-in air station is here to maximize quality time on the water. ATMOS, by Scanstrut, will revolutionize your family’s boating experience. This beautifully...

Cat Hawk Wind Indicator for Non-Spin Catamarans up to 8MThe Cat Hawk is designed for non-spinnaker Catamarans up to 8m. It has been developed to mount onto the front of the Forestay Bridle where it is ideally situated for maximum visibility both upwind...

15" Great HawkFor boats from 8m to 20mThe Great Hawk is designed for Cruising and Racing yachts up to 20m. The Great Hawk vane arm is made from the same super tough nylon and the Reference Arms are made from glassed filled nylon for ultimate rigidity...

Hawk Wind Indicator for Boats up to 8M - 10"The Hawk is the original Hawk Wind Indicator and sets the standard by which all Wind Indicators are judged. Lightweight with a balanced vane arm and the Hawk "V" jewel bearing surface this is the ultimate in...

Little Hawk Mk 2 Wind IndicatorThe Little Hawk Mk 2 brings all of the benefits of the Little Hawk Mk 1 Wind Indicator and mounts it in a secure manor at gooseneck height in front of the mast. Designed for smaller single handed Dinghies, the Little Hawk...

Little Hawk Race Wind Indicator for Boats up to 8MThe Little Hawk Race takes the ever popular Mk 1 Wind Indicator, cuts it to a minimal length and provides with a robust and lightweight mounting system. This gives the customer the lightest, least drag...

Aluminum Boat Hook - 12' - 3-PieceThis Sea-Dog boat hook can grab a line or mooring buoy on board a vessel and ward off other boats or obstructions. An extended hand that prevents users from reaching overboard.Features:Small hookA threaded end...

Aluminum Boat Hook - 8' - 3-PieceThis Sea-Dog boat hook can grab a line or mooring buoy on board a vessel and ward off other boats or obstructions. An extended hand that prevents users from reaching overboard.Features:Small hookA threaded end attachment...

Brass Baitwell Plug - 1/2" Cam action nitrile rubber plug snaps shut to form a leak-proof seal for livewells and baitwells. Clockwise turn of the handle tightens the plug, brass lever snaps down to lock. Snap lock handle is adjustable to tighten...

Brass Baitwell Plug - 3/4" Cam action nitrile rubber plug snaps shut to form a leak-proof seal for livewells and baitwells. Clockwise turn of the handle tightens the plug, brass lever snaps down to lock. Snap lock handle is adjustable to tighten...

Brass Baitwell Plug - 3/8" Cam action nitrile rubber plug snaps shut to form a leak-proof seal for livewells and baitwells. Clockwise turn of the handle tightens the plug, brass lever snaps down to lock. Snap lock handle is adjustable to tighten...

Brass Baitwell Plug - 5/8" Cam action nitrile rubber plug snaps shut to form a leak-proof seal for livewells and baitwells. Clockwise turn of the handle tightens the plug, brass lever snaps down to lock. Snap lock handle is adjustable to tighten...

Brass Snap Handle Drain Plug - 1" Snap-handle drain plugs feature cam action for easy installation and a leak proof seal. Simply turn the handle clockwise to tighten the plug then snap down the handle to lock. Durable stamped brass and nitrile...

Brass Snap Handle Drain Plug - 1-1/4" Snap-handle drain plugs feature cam action for easy installation and a leak proof seal. Simply turn the handle clockwise to tighten the plug then snap down the handle to lock. Durable stamped brass and nitrile...

Chrome Plated Brass Window Anti-Rattle Window StopThis Anti-Rattle Window Stop reduces vibration and noise while underway. Threaded pin tightens on shank. Constructed of chrome plated sand cast brass. Installs with two #6 FH fasteners (not included)...

Folding Ladder - 3 Step These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up...

Folding Ladder - 4 Step These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up...

Folding Ladder - 5 Step These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up...

Garboard Drain & Plug - Machined BronzeThe Garboard Drain & Plug provides drainage for the bilge during haul-out. 1/2” NPT tapered thread plug provides a watertight seal. 2” diameter flange. Plug has a square top for use with a...

Gas Tank Strap - Nylon Webbing/304 Stainless Steel - 72"This Gas Tank Strap is for use in securing a portable gas tank. Includes: 1” x 6’ webbing strap with buckle, two footman's loops, and four #10 FH fasteners. Constructed of nylon...

Motor Well Boot - Molded Rubber - 5-1/2"Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. Includes mounting ring. Constructed of UV-stabilized molded rubber. Installs with #8 RH fasteners...

Multi-Purpose Cutter Replacement AnvilThis is a replacement anvil only for Sea-Dog's multi-purpose cutter, which is great for cutting rope, wire, and plastic tubing.Features:Constructed of powder-coated steel and ABS plasticA great addition to any...

Nylon Adjustable Flagpole Clamps - 1/2" - PairThe flag is attached to the flagpole using sliding, black nylon pennant mounts. Both pennant mounts are adjustable in either direction on the flagpole allowing flexibility in mounting various sizes of flags...

Nylon Angled Deck Hinge - BlackDeck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items...

Nylon Angled Deck Hinge - WhiteDeck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items...

Nylon Concave Deck Hinge - BlackDeck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items...

Nylon Concave Deck Hinge - WhiteDeck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items...

Nylon Deck Hinge - BlackDeck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on...

Nylon Deck Hinge - WhiteDeck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on...

Nylon Flagpole Pennant Mounts & Stainless Clips - PairThe Sea-Dog® Adjustable Rail Mount Flagpole is constructed of highly polished, heavy wall stainless steel tubing with an injection molded nylon rail mount bracket. The flag is attached to the...

Nylon Small Deck Hinge - BlackDeck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on...

Nylon Small Deck Hinge - WhiteDeck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on...

Nylon Square Tube Top Insert - Black - 1"Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a...

Nylon Square Tube Top Insert - White - 1"Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a...

Nylon Top Cap - Black - 3/4"Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top...

Nylon Top Cap - Black - 7/8"Top Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top...