Radar/TV Mounts

APT-250-01 - Aluminum PowerTower® Radar Mount - 10" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using...

Modular Plate for Most Closed Dome and Open Array RadarsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most...

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using...

5" Modular Mount AFT Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories...

APT-LB-GPS2-01 PowerTower® Center Mounted Light Bar and Wing Plate f/2 AntennaInstalls navigation light in the center and provides two (2) antenna mounts for maximum visibility and performance...

4-Degree Wedge for Most Closed Dome Radars - 18"-24" - WhiteImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes...

Mast Mounts For 18" Garmin, KVH M3 & Raymarine 37STVCompatible Units:Garmin GMR18/GMR18HD/18Xhd/18HD+/Fantom18/GMR40B&G / Lowrance /Simrad DX45/3G/4G / HALO20 / HALO20+Intellian i3KVH TracVision...

LTB-90 Light Bar Clamp f/LTB-R, LTB-S LTB-S24 & LTB-13 Light bars, allows for quick fold over of Light BarThe LTB90 from Seaview is an add-on component that aids in a quick, tool-free fold over for...

APT-LB-01 PowerTower® Center Mounted Light BarInstalls navigation lights above the antenna for maximum visibility and performance.Compatible with:Scanstrut aft leaning PowerTower® radar...

Self Levelling Radar Mount - MastCompatible Units:Garmin GMR18/GMR18HD/GMR24HDRaymarine RD218/RD424Lowrance 3G BroadbandSimrad 3G BroadbandSimrad DX45/DX60The Self-Levelling Mast Mount ensures your...

Self Levelling Radar Mount - PoleOur Self-Levelling Pole Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is...

APT-F-150-01 Aluminum PowerTower® Radar Mount - 6" Forward LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured...

1-1/4" Light Bar for Closed Dome Radar Stainless Steel - Must Get LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts...

5" Stainless Steel Power Mount - 7" x 7" Base - f/Garmin/Raymarine 3G/4G RadarIncludes ADA-R1 modular top plate.Seaview Stainless Steel Radar Mounts are 5" tall and aft leaning. The 7" x 7" base...

Light Bar Top - WhiteWhite universal box top for all-round, masthead, and stern (lights not included).

Modular Plate for Most Closed Domes & Open Arrays - BlackSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most...

Removable Base Kit for APXMDM Surface Mount for Starlink MiniThe optional removable base kit (APXMDMRB) can be used to easily remove the Starlink Mini antenna when needed. These are black anodized...

PT3010 Base Wedge f/PowerTower® Radar Mounts - 4°Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a...

Mast MountsStill the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or...

APEX Surface Mount for Starlink Standard Gen 3 AntennaThe Seaview APEX APXG3DMV2 is a direct surface mount kit tailored for the Starlink Standard Gen3 Antenna specifically engineered for the...

Complete Spreader Kit for Radars & Satdomes for Mounts Ending in M2This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection...

StarPod 3 System for Starlink Gen3 Standard Dish *Starlink Dish Not IncludedStarPod Systems are designed to provide a strong, sturdy, and attractive mounting solution for Starlink on board large...

APT-F-LB-01 PowerTower® Center Mounted Light Bar for Forward Leaning Radar MountsCentral light bar for all forward learning PowerTowers®Compatible with:Scanstrut forward leaning PowerTower® radar...

GPS / VHF Antenna Mount for Self Levelling Radar MountSingle mount for installing an additional GPS / VHF antenna above the radar.FeaturesAttaches to top of radome cradle Fits all standard GPS / VHF...

Self Levelling Radar Mount - MastDevices Compatible with LMM-2 Self Levelling Radar MountFuruno - 1621, 1622, 1623, 1715,  1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D / DRS4D-NXT, DRS4W, NavNet...

12.5" Dual Mount for Most Radar Domes - Top for Sat Domes - Top Plate RequiredInstall your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures...

16.75" Dual Mount Pre-Drilled for Most Closed Dome Radars Top for FLIR Searchlight Satellite DomesInstall your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount...

APEX Surface Mount for Starlink Mini - WhiteThe Seaview APEX APXMDM is the perfect direct surface mount kit designed specifically for the Starlink Mini Antenna, engineered to withstand the harshest...

Gen 3 Standard Starlink Antenna Mount Top Plate - Fits Mounts Ending in M1 & M2The Seaview modular top plate ADAG3 for the Gen 3 Standard Starlink Antenna (and sometimes the Gen 4/Standard) is...

Modular Top Plate for Flir M or Ray T Series Thermal CamerasSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of...

Light Arm Receiver for Aft Angled MountsThe Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angle Mounts. Edson's Light Arm Receivers require an Edson...

Simrad/Lowrance/ B&G 2kW & 4G Radar Domes Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68530 Vision...

Vision Series Mounting Plate f/Raymarine Quantum, 2kW & 4kW Radar DomesWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's...

PT2004 - PowerTower® Radar Mount - 6" Aft LeaningThe Scanstrut Composite PowerTower is engineered for outstanding strength with an unparalleled surface finish.  Manufactured using the best composite...

CAM-PT-300-03 Aluminum PowerTower® f/FLIR M300 Cameras - 12"Expertly designed to install your camera on the cabin roof, flybridge or radar arch of your powerboat.  Scanstrut thermal camera mounting...

CAM-PT-150-03 Aluminum PowerTower® for FLIR M300 Cameras - 6"Expertly designed to install your camera on the cabin roof, flybridge or radar arch of your powerboat.  Scanstrut thermal camera mounting...

CAM-PT-300-02 Aluminum PowerTower® for Cameras - 12"The ingenious Camera Power Mount solves the problem of finding a level mounting surface to install cameras onto your powerboat, commercial vessel,...

Self Levelling Radar Mount - Backstay - Aft (A) Made specifically for Raymarine/Garmin DomesOur Self-Levelling Backstay Mount ensures your radar stays level with the horizon at all times for...

APT-F-250-01 Aluminum PowerTower® Radar Mount - 10" Forward LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured...

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning - BlackThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured...