Accessories

Power/Data Cable - 4-PinUse this 6' power/data cable to power your compatible echoMAP. Includes NMEA 0183 inputs/outputs.Compatible Devices:echoMAP™ SeriesWARNING: This product can expose you to chemicals which are known to the State of California...

GND™ 10 Black Box BridgeThe Garmin GND 10 black box bridge seamlessly integrates Nexus instruments and sensors with the Garmin family. It converts data between the Nexus network and NMEA 2000 to provide trouble-free compatibility between Nexus and...

gWind™ Transducer OnlyThe gWind transducer features twin-fin technology with 3-bladed propeller for more accurate TWS in lighter air while the twin-fin design gives a more stable TWA. The 3-bladed propeller, unlike a cups design, is always...

WS310 Wired Wind Sensor OnlyA high precision wired wind sensor, designed for cruising and club racing sailors. The WS310 wind sensor offers high performance data accuracy, with improved aerodynamics suitable for all yachts.The WS310 wind sensor is the...

Bail Mount with Knobs for echoMAP™ SeriesSurface mount your echoMAP™ using our bail mount with knobs; the mount tilts for optimum viewing. With the mount's quick cable disconnect feature, you can plug the necessary cords into the mount,...

Bare Wire Transducer to 12-Pin Sounder Wire Block AdapterConnect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter.Compatible Devices:GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv & 7616xsvGSD™ 25...

GMI/GNX Protective CoverUse our protective cover to protect your device from the harsh marine environment when not in use.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or...

Fuel Flow Sensor with 10' cable & T-connectorFuel Flow Sensor Gasoline ONLY. 1 required per engine. Up to 3 engines supported. Outputs:Fuel FlowTank Fuel UsedTrip Fuel UsedSeasonal Fuel UsedCable Length: 10'Fuel Line Diameter: 3/8" (9.5mm) Inside...

Suncover for i70s & Retrofitted i50, i60, i70 & p70Raymarine black, protective suncover for the i70s and retrofitted i50, i60, i70 and p70. Specifications:Type: Mounting BracketsBox Dimensions: 2"H x 5"W x 5"L WT: 0.3 lbsUPC: 723193812365

TA125 Wind Transmitter Battery Pack and Seal Kit

Wind Vane & CupsCompatible Devices:Raymarine ST60ST60+i60ST290 Egg-Shape Masthead Transducers

H5000 Hydra CPUThe innovative B&G H5000 instrument system is powered by a smart Central Processing Unit (CPU) with the ability to run three levels of software, Hercules, Hydra and Performance. Hydra is designed for sailors running a cruising, or...

WS300 MHU Speed BearingReplacement wind speed bearing for WS300 series wind sensors.Features:Fits both WS310 and WS320

WS300 Series 35M Cable - 115'Features:Wired cable for WS310 115"35M Specifications:Type: CablesBox Dimensions: 3"H x 8"W x 8"L WT: 3.4 lbsUPC: 9420024171561

Anemometer Wind CupsMeasure wind speed on your GWS™ 10 with this anemometer.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more...

Carbon Fiber Mast Bracket - 2 UnitsMount 2 GNX™ 120 instrument displays to the mast with this carbon fiber bracket. It offers a sleek, compelling industrial design, providing a “glass mast” look.WARNING: This product can expose you to...

Carbon Fiber Mast Bracket - 3 UnitsMount 3 GNX™ 120 instrument displays to the mast with this carbon fiber bracket. It offers a sleek, compelling industrial design, providing a “glass mast” look.WARNING: This product can expose you to...

Carbon Fiber Mast Bracket - 4 UnitsMount 4 GNX™ 120 instrument displays to the mast with this carbon fiber bracket. It offers a sleek, compelling industrial design, providing a “glass mast” look.WARNING: This product can expose you to...

Flush Mount Kit for echoMAP™ 5Xdv SeriesGarmin's echoMAP™ device can sit in the most accessible place for your boat when you use the echoMAP™ Sonar 5Xdv Series Flush Mount Kit. Making installation easier than ever, this mount comes...

Flush Mount Kit for echoMAP 73dv/7Xsv SeriesLooking for a sleeker installation of your echoMAP™ device? Garmin's flush mount kit allows you to easily position your device against most flat surfaces in your boat.WARNING: This product can expose...

gWind™ Masthead To Nexus Instrument Connector Adapter CableUse Garmin's connector adapter cable to retrofit your gWind transducer for the Nexus network using your existing Nexus mast cable.Compaticle Devices:gWind™ Race...

gWind™ Race Transducer - Masthead OnlyDesigned for racing sailboats, the gWind Race features a 3.3 feet (1 meter) straight pole to raise the transducer above the mast to remove turbulence errors. It features twin-fin technology with 3-bladed...

Marine Network Cable - 500'Our marine network cable offers an additional 500'(152.4M) of cable length.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm...

Mast Bracket for gWind™/gWind WirelessSecure your gWind and gWind Wireless mast securely with this bracket.Compatible Devices: GNX™ Wireless Sail Pack 43 GNX™ Wireless Sail Pack 52 GNX™ Wireless Wind...

Wind VaneDetermine wind direction with your GWS™ 10 with this wind vane.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go...

Masthead Cable & BaseRaymarine's 30M Masthead Cable and Base for Raymarine ST60 and i70.

Single Mast Bracket f/Micronet & Race MasterT137 Slug Mast Bracket 1 up (Digital, Dual, Analog & Master Range). Single mast bracket for Micronet displays and Race Master.Features:Strong and lightweightBlack powder coatedCorrosion free

TA065 Small Cradle for Micro Compass (mid grey)Small Cradle for Micro Compass

ST60+ Sun CoverFits standard surface mounted ST60+ instruments

TA122 Wind Transmitter Bearing Service Kit

Yamaha Command-Link Plus CableThe Yamaha Link Cable is connected between the NMEA2000 (DeviceNet) connector of the ECI-100, and the available socket on the Yamaha Command-Link or Command-Link Plus hub.

T005 Strap BracketFeatures: Light weight Easy to fit and remove Strong construction Bright painted finish

WS-C25 25M NMEA 0183 Cable for 120WXWith NMEA 0183 output only. End in an Airmar 8-Pin connector which can be removed for connection to bare-wire devices.25M/82' Specifications:Cable Length (Feet): 82'Data Interface: NMEA 0183

VMHU Mast Cable - 36mB&G 36 meter (118') cable for vertical arm masthead units.

20/20 HV Mast Bracket 3-Way3-way mast bracket for 20/20HV displays. 

Suncover for Triton2 DisplayKeep your unit protected from the elements with this display cover.

WS300 Series 20M Cable - 65'Features:Wired cable for WS310 65'20M Specifications:Type: CablesBox Dimensions: 8"H x 8"W x 8"L WT: 2.4 lbsUPC: 9420024171554

WS320 Wireless Wind Sensor OnlyA high precision wireless wind sensor designed for cruising and club racing sailors. The WS320 wireless wind sensor offers a high performance solution, with exceptional data accuracy and improved aerodynamics which is easy...

Protect your Clipper instrument from the elements with this spare weather cover.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wind Anemometer Cup Kit for Version 2 - 3 Wire UnitsSpare anemometer cup assembly with fixings and illustrated fitting instructions. Clipper, Target, Cruiser Wind Version 2 – Three wire mast units, Wireless and Tactical masthead units.This...