Blowers & Heaters

DC 150 CFM Flexmount 3" BlowersFeatures:Tough Reinforced Plastic HousingUniversal flexmount bracket permits outlet to face any directionSlip-On Inlet and Outlet Ducting ConnectionEfficient High...

Heavy Duty Flexmount BlowerDC 250 CFM Flexmount 4" BlowerTough Reinforced Plastic HousingUniversal Flexmount Bracket permits outlet to face any directionSlip-On Inlet Ducting ConnectionEfficient...

DC 105 CFM Flangemount 3" BlowersJabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other...

Rule In-Line Blower - 3" DuctingPart Number: 140Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings...

Heavy Duty Flexmount BlowerDC 250 CFM Flexmount Continuous Duty 4" BlowerExtended Life 5,000 Hour MotorTough Reinforced Thermoset Plastic HousingMounts to Any Flat SurfaceSlip-On Inlet Ducting...

DC 250 CFM Flangemount 4" BlowersFeatures:Tough Reinforced Plastic HousingMount to any Flat surfaceSlip-On Inlet Ducting ConnectionEfficient High Volume Air FlowLow Current DrawCorrosion-Resistant...

Rule In-Line Blower - 4" DuctingPart Number: 240Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings...

Marine Air Blower 280 Flange - 12V3″ flange mounted marine ventilation 12V radial blower with capacity 280 m3 per h, 163 CFM. Inlet 72mm, outlet 72mm. Body in hermoplastic PA6 high durable white...

Turbo 3000 Series In-Line BlowerPart #: 1733-4The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide...

Turbo 4000 Series II In-Line BlowerPart #: 1749-4Attwood's improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has...

Heavy Duty Flangemount BlowerHeavy Duty Blowers are designed for applications such as commerical or high use engine room ventilation and extraction where a long life requirement demands heavy duty...

DC 250 CFM Flexmount Continuous Duty 4" BlowersFeatures:Extended Life 5,000 Hour MotorTough Reinforced Thermoset Plastic HousingMounts To Any Flat SurfaceSlip-On Inlet Ducting ConnectionEfficient...

3" Blower Flange Mounted - 12VFeatures:3" ducts12V100 percent factory tested

3" In-Line BlowerInlet/Outlet - 3"CFM - 158Johnson Pump in-line blowers provide ventilation for bilges, engine compartments, galleys, and heads.Made from high quality ABS plastic construction,...

YELLOWTAIL™ 3" Marine Blower - 12 VDC, 120 CFMSHURFLO has developed a unique nylon fan that includes six blades to ensure high performance and efficient ventilation for bilges, engine compartments,...

Air Blower 1000 Inline 165 - 12V7″ in-line mounted marine ventilation 12V axial blower with capacity 1000 m3 per h, 589 CFM. 178mm port connection and 165mm length. Sheltered blades from blower...

Air Blower 1000 In-Line 250 - 12V7″ in-line mounted marine ventilation 12V axial blower with capacity 1000 m3 per h, 589 CFM. 178mm port connection and 250mm length. Sheltered blades from blower...

Air Blower 1000 Inline 250 - 24V7″ in-line mounted marine ventilation 24V axial blower with capacity 1000 m3 per h, 589 CFM. 178mm port connection and 250mm length. Sheltered blades from blower...

Marine Air Blower 500 Flange - 12V4″ flange mounted marine ventilation 12V radial blower with capacity 500 m3 per h, 324 CFM. Inlet 100mm, outlet 103mm. Body in hermoplastic PA6 high durable white...

Air Blower 500 Flange - 24V4″ flange mounted marine ventilation 24V radial blower with capacity 500 m3 per h, 324 CFM. Inlet 100mm, outlet 103mm. Body in hermoplastic PA6 high durable white Nylon...

Air Blower 500 Flex - 12V4″ flex mounted marine ventilation 12V radial blower with capacity 500 m3 per h, 324 CFM. Inlet 100mm, outlet 103mm. Body in hermoplastic PA6 high durable white Nylon with...

Air Blower 500 Flex - 24V4″ flex mounted marine ventilation 24V radial blower with capacity 500 m3 per h, 324 CFM. Inlet 100mm, outlet 103mm.bBody in hermoplastic PA6 high durable white Nylon with...

Marine Air Blower 750 Flange - 12V6″ flange mounted marine ventilation 12V radial blower with capacity 750 m3 per h, 441 CFM. Inlet 150mm, outlet 103mm. Body in hermoplastic PA6 high durable white...

Air Blower 750 Flex - 12V6″ flex mounted marine ventilation 12V radial blower with capacity 750 m3 per h, 441 CFM. Inlet 150mm, outlet 103mm. Body in hermoplastic PA6 high durable white Nylon with...

Air Blower 1000 Inline 165 - 24V7″ in-line mounted marine ventilation 24V axial blower with capacity 1000 m3 per h, 589 CFM. 178mm port connection and 165mm length. Sheltered blades from blower...

Air Blower 280 Flange - 24V3″ flange mounted marine ventilation 24V radial blower with capacity 280 m3 per h, 163 CFM. Inlet 72mm, outlet 72mm. Body in hermoplastic PA6 high durable white Nylon with...

Air Blower 750 Flange - 24V6″ flange mounted marine ventilation 24V radial blower with capacity 750 m3 per h, 441 CFM. Inlet 150mm, outlet 103mm. Body in hermoplastic PA6 high durable white Nylon...

AC 100 CFM Flangemount 3" BlowersFeatures: Tough Reinforced Plastic HousingContinuous duty motor with thermal overloadMount to any surfaceSlip-On Inlet and Outlet Ducting ConnectionEfficient High...

DC 150 CFM Flangemount 3" BlowersFeatures:Tough Reinforced Plastic HousingMount to any surfaceSlip-On Inlet and Outlet Ducting ConnectionEfficient High Volume Air FlowLow Current...

Flexmount BlowerHigh volume air intake or extraction blowers for engine room, fuel compartment, galley or headsFeatures:Flexmounting for 360° adjustable outletSlip-on inlet and outlet ducting...

Flexmount BlowerDC 150 CFM Flexmount 3" BlowerTough Reinforced Plastic HousingUniversal flexmount bracket permits outlet to face any directionSlip-On Inlet and Outlet Ducting ConnectionEfficient...

Flangemount BlowerDC 250 CFM Flangemount 4" BlowerTough Reinforced Plastic HousingMounts to any flat surfaceSlip-on Inlet Ducting ConnectionEfficient High Volume Air FlowLow-Current...

4" Continuous Duty Flangemount Blower - 115V, 250 CFMThe Jabsco continuous duty 4-inch flange-mount blower, with a 115 Volt Motor. This is rated for 250 CFM. The Jabsco AC blowers are ideal for...

4" Flangemount Heavy Duty Blower - 24V - 250 CFMThe powerful flange mount blower is designed for use wherever continuous ventilation is required. A motor life of 5,000 hours is guaranteed for...

Heavy Duty Flexmount BlowerAC 250 CFM Flexmount Continuous Duty 4" BlowerFlexmount Blowers are built to the same high specification as the Heavy Duty Flangemount Blowers for use as air intake or...

4" In-Line BlowerInlet/Outlet - 4"CFM - 240Johnson Pump in-line blowers provide ventilation for bilges, engine compartments, galleys, and heads.Made from high quality ABS plastic construction,...

In-Line 3" Bilge Blower - 24VFeatures:Connections: - for 75mm (3") ductingDimensions: - 130mm long, 95mm high, 125mm wideFuse Size: - 2.5(amp)Output: - 3.8 cu. m/minuteEfficient high volume...

In-Line 4" Bilge Blower - 24VXylem’s Rule In-Line Blowers provide ventilation for boat bilges, engine compartments, galleys and heads. Designed for efficient, high-output operation, these blowers...

YELLOWTAIL™ 4" Marine Blower - 12 VDC, 215 CFMSHURFLO has developed a unique nylon fan that includes six blades to ensure high performance and efficient ventilation for bilges, engine compartments,...

MSD SpoutRotating pour-out spoutThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.