Kits and Rigging

Premade 10awg fuse holders for dc chargers and electronics wiring. Comes complete with heat shrink connector and extra double walled adhesive shrink wrap to completely water proof your connections. Also includes a 20 amp fuse.

Includes: (1) Voltage Regulator for Lowrance units 16.4 volts (1) 3-Way Perko Switch Battery Install Kit (1) Positive Lug This unit is not to be used for any voltages over 18.25 (not to be used on 24v or 36v systems)

On/Off Perko required. See diagram for wiring instructions. Get the best performance on your forward scan units with this voltage regulator setup to deliver a steady clean supply of 28 volts to all your forward scan modules. This unit meets the specs of...

This Perko switch allows you to utilize your current wiring harness if your electronics are already on a dedicated wiring system. This Perko switch gives you the ability to switch between 12v power and 16v power with the flip of a switch. This ensures...

The 3-Way Perko Switch Battery Install Kit includes everything you need to wire in a dedicated wiring system for your electronics. This kit allows you to switch between your primary PowerHouse Lithium battery and a secondary cranking battery at the flip...

For connecting two batteries in parallel for trolling motors, or hooking up in series.

These Anderson connectors are conveniently color-coded for the voltage you need.

M8 x 125 x 16 and 20mm for batteries 48ah and higher.

Used to turn off the DC chargers if needed and protect your system (required). Breakers come with the dc chargers. Also can be used to control power to vr units.

For connecting 48V batteries to Spirit motors

This Perko switch allows you to shut off all power to your devices or if you use them to control your Run & Gun Chargers. This unit is required for the 28 volt regulator for the forward facing sonar black boxes. Now you can turn off the forward...

PHL Digital Display Gauge: Precision Monitoring for Your 48V 32Ah PowerHouse Battery Take the guesswork out of your power management. The PHL Digital Display Gauge is specifically engineered for the PowerHouse Lithium 48V 32Ah battery, providing...

Our battery trays are made from heavy-duty aluminum. The bottoms are lined with a 3mm thick rubber protection pad to safely secure your battery while reducing vibrations. Also included is a ratchet strap and 6 install screws. This group GC8 battery tray...

1/4" Stud with Lock Washer and Nut Sturdy Nylon Construction Two Mounting Holes Integrated Nut at the Bottom of the Stud for Tightening

Our battery trays are made from heavy-duty aluminum. The bottoms are lined with a 3mm thick rubber protection pad to safely secure your battery while reducing vibrations. Also included is a ratchet strap and 6 install screws. This group 20 battery tray...

Our battery trays are made from heavy-duty aluminum. The bottoms are lined with a 3mm thick rubber protection pad to safely secure your battery while reducing vibrations. Also included is a ratchet strap and 6 install screws. This group 24 battery tray...

Our battery trays are made from heavy-duty aluminum. The bottoms are lined with a 3mm thick rubber protection pad to safely secure your battery while reducing vibrations. Also included is a ratchet strap and 6 install screws. This group 31 battery tray...

Our battery trays are made from heavy-duty aluminum. The bottoms are lined with a 3mm thick rubber protection pad to safely secure your battery while reducing vibrations. Also included is a ratchet strap and 6 install screws. This group 5D battery tray...

1/4" Stud with Lock Washer and Nut Sturdy Nylon Construction Two Mounting Holes Integrated Nut at the Bottom of the Stud for Tightening

Replacement Ratchet Strap. Same Strap included with All PHL Battery Trays

Designed specifically to work with 16V & 28V setups. This cable can be ordered to power one or 2 devices. When you require only the best, then it's SonarPros. This harness is a separate pull from the graph harness and you can run to your 16V or 28V...

Please allow 5-7 business days for production as these harnesses are each custom built to your boat When you require only the best, then it's SonarPros. Designed especially to work with the Powerhouse 16V power system. Better voltage means better...

Now you can use the run and gun charger and not worry about voltage issues. This regulator will produce a steady clean voltage of 16.4 all day long even when hooked up to a charger. This is a must for Lowrance units that cap their head units at 17.0...

Includes: (1) 28V Forward Facing Sonar Converter (1) Perko On/Off Switch (1) Grounding Lug (1) Positive Lug (1) 10AWG Fuse Holder View a hi-res version of the wiring diagram here.

Includes: (1) 28V Forward Facing Sonar Converter (1) 3-Way Perko Switch (1) Grounding Lug (1) 10AWG Fuse Holder View a hi-res version of the wiring diagram here.