Transducer Accessories

AD MTM Trolling Motor Adapter for MEGA Transom TransducerThis hardware kit adapts our MEGA transom mount transducer for use on the trolling motor. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California...

8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XIDUse this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.WARNING: This product can expose you to chemicals which are known to the State of...

Trolling Motor Shaft Mount for Panoptix™ LVS32Mount a compatible Panoptix transducer on the shaft of your trolling motor with this kit. It's adjustable design fits all shaft diameters, including those on popular Minn Kota® and MotorGuide®...

9 M SIDB Y - 9-Pin Side Imaging Dual Beam Splitter CableY Cable - Side Imaging and Dual Beam - allows you to use two transducers on one unit without the use of a transducer switch. For use with Side Imaging products only, in conjunction with a dual...

AD-MTM-HW-MSI MEGA SI+ Trolling Motor Adapter Bracket MEGA SI+ Trolling Motor Transducer Adapter Bracket converts a MEGA Side Imaging+ transom mount transducer for trolling motor use. With a rugged composite design, it conforms to the trolling...

Extension Cable with XID - 12-Pin - 10'Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID.WARNING: This product can expose you to chemicals which are known to the...

Panoptix LiveScope™ Transducer Extension Cable - 21-PinExtend the cable length of your compatible Panoptix™ transducer with this 10 ft (3 m) cable.Compatible Devices:Panoptix LiveScope™ SystemPanoptix™ LVS32 TransducerWARNING:...

TotalScan/StructureScan 3D Replacement BracketReplacement bracket for TotalScan & StructureScan 3D Transom Mount TransducersHardware included Specifications:Type: Mounting BracketsBox Dimensions: 4"H x 5"W x 13"L WT: 0.8 lbsUPC:...

AD-MTM-HW-MDI MEGA DI+ Trolling Motor Adapter Bracket MEGA DI+ Trolling Motor Transducer Adapter Bracket converts a MEGA Down Imaging+ transom mount transducer for trolling motor use. With a rugged composite design, it conforms to the trolling...

Extension Cable For LSS-1 or LSS-2 TransducerFor use specifically with Lowrance's LSS-1 or LSS-2 Transducer. If the 20' transducer cable is not long enough, the 10' extension cable is available. Specifications:Type: ExtensionBox Dimensions: 4"H x...

Extension Cable with XID - 12-Pin - 30'Extend the cable length of your compatible 12-pin transducer with this 30 foot (9 meter) cable. Supports 12-pin Airmar transducer with XID.WARNING: This product can expose you to chemicals which are known to the...

Panoptix™ LiveScope™ LVS12 Trolling Motor Shaft MountMount a compatible Panoptix™ transducer on the shaft of your trolling motor with this kit. It's adjustable design fits all shaft diameters, including those on popular Minn Kota®...

Trolling Motor Barrel Mount for Panoptix™ LVS32Mount a compatible Panoptix transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth and fits all barrel diameters, including those on popular...

HS-WS-SS Mounting KitMounting kit for transom mount 83/200 kHz skimmer transducers Specifications:Type: Mounting BracketsBox Dimensions: 2"H x 3"W x 4"L WT: 0.1 lbsUPC: 042194504995

With rugged, durable construction, this kit fits transducers of all major manufacturers, and allows mounting on the lower unit of bow- or transom-mount trolling motors.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate...

Replacement Top Mount f/HDI 83/200/455/800 TMReplacement mount for Skimmer and top housing Specifications:Type: Mounting BracketsBox Dimensions: 3"H x 4"W x 7"L WT: 0.2 lbsUPC: 421945359518

EC M10 Transducer Extension Cable - 10'10' extension cable for transducers. Current Models:  ICE HELIX, ICE Flashers, PiranhaMAX, HELIX 5, HELIX 7, HELIX 9, HELIX 10, HELIX 12Discontinued Series: 500 Series, 600 Series, 700 Series, 800...

Heavy-Duty Transom Mount Bracket w/Spray ShieldMount the transducer on the transom of your boat so it remains in the water at all times to provide excellent sonar returns.  Bracket can be adjusted to allow the angle of the transducer to be parallel...

HDI Trolling Motor XDCR Adapter CupFor using HDI 83/200 and 455/800 kHz XDCR on a trolling motor Specifications:Type: AdaptersBox Dimensions: 3"H x 7"W x 8"L WT: 0.2 lbsUPC: 9420024121924

Mounting hardware for the XNT transom mount transducers. Includes a kick up bracket.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm...

Adapter cable, 7 pin BLUE to bare wires Specifications:Type: AdaptersBox Dimensions: 2"H x 4"W x 7"L WT: 0.3 lbsUPC: 042194535111

Garmin 12-Pin Mix & Match Cable for Chirp TransducersAirmar's Garmin Mix & Match CableFeatures:12-PinSpecifically for Chirp Transducers Specifications:Type: AdaptersBox Dimensions: 1"H x 4"W x 4"L WT: 0.2 lbsUPC: 801769003239

Navico 9-Pin Mix & Match Chirp Cable - 1MAirmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide TransducersFeatures:Length: 1M9-Pinfor Med, High, and Highwide Transducers, Single Chirp Transducers Specifications:Type:...

Replacement Transducer Bracket for Plastic Transom Mount Transducer with Depth & TempThis replacement Transducer Bracket is for the plastic transom mount that can be used to replace the dual frequency transducers included with many Garmin units.WARNING:...

Transducer Spray ShieldGarmin's transducer spray shield is available for Garmin side scanning transducers.Mounting hardware included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth...

AD XTM 9Transducer Mounting HardwareThis hardware kit adapts to our standard transom mount transducers in the list below for use on the trolling motor.For use with:XNT 9 20 TXNT 9 QB 90 TXNT 9 SI 180 TXNT 9 QB 90XNT 9 20XNT 9 DI T1157c1158c1158c...

Transom Mount Mounting Bracket for CPT-60Raymarine's mounting bracket specifically for CPT-60. Specifications:Type: Mounting BracketsBox Dimensions: 2"H x 6"W x 8"L WT: 0.2 lbsUPC: 723193785553

Navico 7-Pin Blue Mix & Match Chirp Cable - 1MAirmar's Mix & Match Chirp Cable for Navico.Features:Length: 1M7-PinColor: Blue Specifications:Type: AdaptersBox Dimensions: 1"H x 6"W x 6"L WT: 0.2 lbsUPC: 801769003222

7-Pin Transducer Adapter Cable to HOOK²This adapter cable will adapt any Navico 7-pin tranducer to a HOOK2 unit. Specifications:Type: AdaptersBox Dimensions: 2"H x 6"W x 8"L WT: 0.2 lbsUPC: 9420024166956

Kayak Scupper Transducer MountLowrance's transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmer transducers, both 83/200 kHz and 455/800 kHz...

Adapter 7-Pin Blue Transducer to a 9-Pin Black UnitFeatures:Connects legacy 7-Pin Blue Transducer to a 9-Pin Black UnitSonic Connector Transducer Adapter CableCompatible With:HDS Gen3Elite-Ti SeriesNSS evo2GO XSE SeriesSonarHub™...

CPT-DV/CPT-DVS Mounting KitTransom Mount Bracket for CPT-DV & CPT-DVS Specifications:Type: Mounting BracketsBox Dimensions: 2"H x 6"W x 8"L WT: 0.2 lbsUPC: 723193795842

Trolling Motor BracketTrolling Motor Bracket specifically designed for the Dragonfly CPT-DV and CPT-DVS transom mount transducers. Specifications:Type: Mounting BracketsBox Dimensions: 1"H x 6"W x 8"L WT: 0.2 lbsUPC: 723193796177

Transducer Extension CableUse this 10' (3M) extension cable to connect your 4-pin transducer to your sonar unit.Compatible Devices:echo™ 100echo™ 150echo™ 200echo™ 300cecho™ 500cecho™ 550cWARNING: This product can...

Panoptix LiveScope™ Transducer 10' Extension Cable - 12-PinExtend the cable length of your compatible Panoptix LiveScope™ transducer with this 10' (3M) cable. WARNING: This product can expose you to chemicals which are known to the...

9 M SILR Y Dual Side Image Transducer Adapter Cable f/HELIX Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a...

Extension Cable for HOOK² TripleShot/SplitShot Transducer - 10'10' extension cable for connecting TripleShot/SplitShot Transducers to HOOK² Specifications:Type: ExtensionBox Dimensions: 2"H x 6"W x 10"L WT: 0.55 lbsUPC:...

SS3D SSHD & TotalScan Skimmer Transom Mount BracketStructure Scan 3D gives freshwater and saltwater anglers a unique, three-dimensional view of fish, structure and bottom contours - making it easier to understand where fish and structure are located...

4-Pin Transducer to 8-Pin Sonar PortConnect a 4-pin transducer to an 8-pin sonar port on your compatible marine device with this adapter cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer,...

8-Pin Transducer to 4-Pin Sounder Adapter CableConnect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable.Compatible Devices:STRIKER™ 4STRIKER™ 4 Portable Bundle STRIKER™ 4 Portable...