Radar/TV Mounts

Wing Light Arm Receiver for Aft Angled MountsEdson's 68640 Wing Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angled Mounts while providing two wings to mount adding space for GPS Antennas and other electronics...

Wing w/Light Arm ReceiverEdson's 68800 Wing Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts while providing two wings to mount adding space for GPS Antennas and other electronics. Edson's Wing Light...

Low Profile Satdome Adapter for KVH, Raymarine, and IntellianSeaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables...

18" Radar Mast PlatformSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft...

StarPod 2 System for Starlink Gen2 Actuated Dish (20.2 x 11.9″ Dish Size)*Starlink Dish NOT INCLUDEDThe StarPod 2 System is a waterproof, secure, attractive mounting solution for your Starlink Gen2 Actuated antenna. The housing features a built-in...

StarPod Housing Only for Starlink Roam/RV Antenna - Base Not IncludedThe StarPod from NavPod is a waterproof housing designed for permanent mounting of the Starlink Roam/RV antenna, typically on a yacht’s hardtop or radar arch. The StarPod housing...

StarPod Kit for Starlink Roam/RV Antenna - Housing & BaseThe StarPod from NavPod is a waterproof housing designed for permanent mounting of the Starlink Roam/RV antenna, typically on a yacht’s hardtop or radar arch. The StarPod housing fits...

StarPod 3 System for Starlink Gen3 Standard Dish (23.04 x 15.07″ Dish Size)*Starlink Dish NOT INCLUDEDThe StarPod 3 System is a waterproof, secure, attractive mounting solution for your Starlink Gen3 Standard antenna. The housing features a...

Triple Mount Adapter for GPS, Light and VHFLight bar adapter to mount a light and 2 GPS units. (Light and electronics not included) Specifications:Type: Triple MountsBox Dimensions: 4"H x 12"W x 14"L WT: 1.7 lbsUPC: 839662002585Quick...

1200mm Deck Strut KitComplete 1200mm Deck Strut Kit - for SC100 Pole Mount Specifications:Construction: Stainless SteelType: MiscBox Dimensions: 4"H x 5"W x 54"L WT: 4.45 lbsUPC: 5060114793217

APT6003 Aluminum PowerTower® Open Array Radar Mount - 6" Aft Leaning Scanstrut Aluminium PowerTower® has been designed and engineered to install your Open Array on the roof, T-top, flybridge or radar arch of your powerboat, providing the...

6" Aluminum PowerTower Mount for StarlinkEngineered for Starlink Flat High-Performance 150mm (6”) high and constructed from the best marine-grade aluminum, designed to fit Starlink's Flat High-Performance Model.Install your Starlink with...

SPT1002 - Stainless Steel PowerTower® Radar Mount - 6" Aft LeaningThe Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless...

8" Aluminum Wedge Mount for StarlinkIs your Boat Starlink Ready?Enhance the performance of your Starlink Flat High-Performance with our Aluminium 8° Wedge Mount which has been specifically designed for the marine environment. The mount works as a...

SC30 Satcom MountManufactured from a single piece composite GRP moulding for a high strength, corrosion-free mount.   Your chosen antenna will attach through external fixings and pre-drilled mounting holes, making installation and maintenance...

APT-F-150-02 Aluminum PowerTower® Radar Mount - 6" Forward LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium,...

APT-250-02 - Aluminum PowerTower® Radar Mount - 10" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is...

Camera Mast Mount for FLIR M300 SeriesDesigned in partnership with FlIR ensuring the perfect fit for your camera. Scanstrut Mast Mounts are the first choice for boat owners the world over. The range has been extended so we now offer an option for...

Camera Plate 1 for FLIR M-Series Cameras & SearchlightsThe Modular Dual PowerTower has been designed to allow your open array, radar, Satcom and camera to be mounted together in one single space-saving modular installation.Camera plate 1 (FLIR...

Camera Plate 2 for FLIR m100/200 Thermal Imaging CamerasThe modularDual Power Tower has been designed to allow your open array. radar, satdome and camera to be mounted together in one single space saving modular installation. Specifically for Camera...

CAM-PT-150-02 Aluminum PowerTower® for Cameras - 6"The ingenious Camera Power Mount solves the problem of finding a level mounting surface to install cameras onto your powerboat, commercial vessel, RIB or sailboat wheelhouse.Compatible with:FLIR -...

APT-GPS-01 PowerTower® Center Mounted Bar f/GPS/VHF/Navtex AntennaMounts GPS, VHF and Navtex antennas above the radar for maximum visibility and performance.  Works with standard 1” x 14 TPI thread.Compatible with:Scanstrut aft leaning...

APT-LB-01-BLK PowerTower® Center Mounted Light Bar - BlackInstalls navigation lights above the antenna for maximum visibility and performance.Compatible with:Scanstrut aft leaning PowerTower® radar mountsFeatures:All mounting holes predrilled...

APT-LB-L1 PowerTower® Central Light Bar w/Integrated 360° White LED LightMaximize your Navlight performance.  Integrated light mount comes pre-fitted with a LED 360° all-round white light.Compatible With:Scanstrut aft leaning...

Dual PowerTower® Strut - RadomeThe Modular Dual PowerTower® has been designed to allow your radome radar, Satcom and camera to be mounted together in one single space-saving modular installation. Specifications:Material: 6082 Aluminum...

Self Levelling Radar Mount - Backstay - Aft (A) - Made specifically for Sitex/Simrad DomesOur Self-Levelling Backstay Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the...

LMB-EXTSHORT 0.6M Extension Kit for LMB Mounting Pole0.6M Extension Kit for LMB mounting pole. Includes joiner and fastening kit. Single mount for installing an additional GPS/VHF antenna above the radar.Features:Attaches to top of radome cradle Fits...

Self-Levelling Radar Mount - Backstay - Fwd (F) - Made Specifically for Raymarine & Garmin DomesOur Self-Levelling Backstay Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls,...

 LMB-F2 Self Leveling Radar Mount - Backstay (F) for Sitex/Simrad Domes The Self-Levelling Backstay Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is...

Self Levelling Radar Mount - PoleOur Self-Levelling Pole Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the...

Mast MountsCompatible Units:Raymarine: 24" 4kW RadomeStill the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or...

APT-250-01-B - Aluminum PowerTower® Radar Mount - 10" Aft Leaning - BlackThe Scanstrut Aluminum PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium,...

APT6002 Aluminum PowerTower® Open Array Radar Mount - 6" Aft LeaningScanstrut Aluminium PowerTower® has been designed and engineered to install your Open Array on the roof, T-top, flybridge, or radar arch of your powerboat, providing the...

Radar Guard for Raymarine 4kW/24" Radomes Polished Stainless Steel Guards protect radome from damage and reduce wear on the sails.Features:Mounted using radome bolts, no extra fastenings requiredEasy to fit – between mast mount and radar...

Radome Plate 2 for Furuno DomesSpecifically for Radome plate 2 (Furuno radomes)  Specifications:Type: AdaptersConstruction: Powder Coated AluminumBox Dimensions: 4"H x 10"W x 10"L WT: 2.05 lbsUPC: 5060114796355

Satcom Plate 1 Designed for Satcoms Up to 30cm (12")The Modular Dual PowerTower has been designed to allow your open array, radar, Satcom & camera to be mounted together in one single space-saving modular installation.Features:Designed for Satcoms...

Satcom Plate 3 Designed for Satcoms Up to 60cm (24")The Modular Dual PowerTower has been designed to allow your open array, radar, Satcom & camera to be mounted together in one single space-saving modular installation. Features:Designed for Satcoms...

SC101 Radar Pole Mount - 6'Totally universal, the Scanstrut SC101 Pole Mount installs your radar onto the deck or transom of your boat.Supplied as a complete kit, you will have everything you need for a quick and easy installation.  The anodized...

SC102 Radar Pole Mount - 8'Totally universal, the Scanstrut SC102 Pole Mount installs your radar onto the deck or transom of your boat.Supplied as a complete kit, you will have everything you need for a quick and easy installation.  The anodized...

SC103 Radar Pole Mount - 6'Totally universal, the Scanstrut SC103 Pole Mount installs your radar onto the deck or transom of your boat.Supplied as a complete kit, you will have everything you need for a quick and easy installation.  The anodized...