RAM Mounting Systems

The RAM-D-202U consists of a 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180...

The (RAM-B-202U) RAM marine grade aluminum base contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern...

The RAM antenna mount is designed to hold most VHF and similar antennas. The rubber ball and socket system securely mounts the antenna while allowing for almost infinite adjustment. Mount the...

The powder coated marine grade aluminum base contains a 1" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center,...

RAM Universal Finger-Grip™ Phone/Radio HolderThe RAM Composite Universal Finger Grip Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3...

RAM Trolling Motor Stabilizer MountThe RAM-108U consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will...

RAM Trolling Motor Stabilizer Mount with Long Double Socket ArmThe RAM-108-DU consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap...

Ram Mount - Humminbird - Lowrance Elite/MarkThe RAM-B-107U, powder coated marine grade aluminum mount, consists of a double socket arm, one 2.5" diameter round base and connecting...

RAM 1.5" Diameter Ball Mount with 6.25" X 2" Rectangle Base, STANDARD LENGTH Double Socket Arm & 2.5" Round Base The RAM-111U, powder coated marine grade aluminum mount, consists of a double socket...

RAM 2.25" Diameter Ball Mount with 11" X 3" Rectangle Base, & 3.68" Round BaseThe RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The...

RAM 1" Diameter Ball Mount with 6.25" X 2" Rectangle Base & 2.5" Round Base The RAM-B-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round...

RAM 1" Diameter Ball Flat Surface Mount w/ 2.5" Round Base & Diamond BaseDescription:The RAM-B-138U consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, double...

Unpackaged Ram Wedge MountKeeping things simple and versatile, the new RAM Ball Wedge Mounts are a great way to provide a mounting point to practically anything. Simply slide the wedge into the...

Ram Rod 2000 Rail Mount Adapter KitMaterial: High Strength PlasticColor: Black

RAM-ROD™ Flush Base f/ Spline PostsDescription:The RAM-114FMU contains 4 pre-drilled holes and a socket compatible with RAM-ROD™ and RAM-TUBE™ holders with a spline post.Color:...

RAM-ROD™ Deck and Track Flat Surface Base w/ Spline PostsThe RAM-114DTMU deck and track flat surface base includes a socket compatible with RAM-RODT and RAM-TUBET holders with a spline post...

Ram Rod 2000 Deck & Track Base 5 SpotColor: BlackMaterial: High Strength Plastic

RAM-ROD™ Bulkhead Vertical Base f/ Spline PostsThe RAM-114BMU contains 4 pre-drilled holes and a socket compatible with RAM-RODT and RAM-TUBET holders with a spline post. Material: High...

RAM-TUBE™ 2000 Holder w/ Flush Mounting BaseDescription:The RAM-301-FU consists of the RAM-TUBET 2000 fishing rod holder, 6" long ratchet spline post arm and flush mounting base. The ratcheting...

RAM Tube 2000 Holder with Deck Track Mount Description:The RAM-301-DU consists of the RAM-TUBET 2000 fishing rod holder, 6" long ratchet spline post arm and deck mounting base. The ratcheting...

RAM Tube 2000 Holder with Bulkhead Mount Description:The RAM-301-BU consists of the RAM-TUBET 2000 fishing rod holder, 6" long ratchet spline post arm and bulkhead mounting base for vertical...

Ram Rod 2007 Holder With BaseRAM designs fishing rod holders like nobody else. Take a look at the original RAM ROD series released in the year 2000. This unique concept did a whole lot more that...

RAM-ROD™ 2000 Fishing Rod Holder with Flush Mounting BaseThe RAM-114-FU, high strength composite fishing rod holder with flush base, is a must have for the fishing enthusiast. Designed to mount...

Ram Rod 2000 Holder Unpackaged With Deck & Track MountThe RAM-114-DU, high strength composite fishing rod holder with deck track base, is a must have for the fishing enthusiast. Designed to mount...

Ram Rod Unpackaged 2000 Holder With Bulkhead MountThe RAM-114-BU, high strength composite fishing rod holder with bulkhead base, is a must have for the fishing enthusiast. Designed to mount...

Ram Rod Revolution Salt Water Rod HolderUnlike anything you've seen before, and performance beyond your expectations describes another great product for "Pros and Joes" alike. Integrating two sought...

X-Grip® Large Phone Mount with Handlebar U-Bolt BaseThe RAM-B-149Z-A-UN10U consists of a zinc coated u-bolt base, short double socket arm and universal spring loaded X-Grip IV cradle for large...

X-Grip® Phone Mount with Handlebar U-Bolt BaseThe RAM-B-149Z-UN7U consists of a zinc coated u-bolt base, double socket arm and universal X-Grip® cradle. Included in this package is hardware...

No-Drill™ Laptop Mount f/Ford Transit Full Size VanThe RAM® No-Drill™ Laptop Mount for the Ford Transit Full Size Van features a heavy-duty steel mounting base custom designed to fit...

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball, Short Arm and X-Grip® for PhonesTake your mobile entertainment on the road with the new RAM® Torque™ handlebar...

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball, Short Arm and X-Grip® for Larger PhonesTake your mobile entertainment on the road with the new RAM® Torque™...

RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with B Size 1" Ball, Short Arm and X-Grip® for PhonesTake your mobile entertainment on the road with the new RAM®...

RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with B Size 1" Ball, Short Arm and GoPro®/Action Camera MountThe RAM® Torque™ handlebar and rail mounting base has a...

RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with B Size 1" Ball, Short Arm and Diamond PlateThe RAM® Torque™ handlebar and rail mounting base has a 1” rubber...

Torque™ 1-1/8" - 1-1/2" Diameter Handlebar/Rail Base w/B Size 1" Ball, Short Arm & Level Cup™The RAM® Torque™ handlebar and rail mounting base has a 1” rubber ball...

Small Tough-Claw™ Base with Short Double Socket Arm & GoPro®/Action Camera MountThe RAM-B-400-A-GOP1U consists of the Tough-Claw™ rail clamp base, SHORT length double socket arm...

Tough-Claw Small Clamp Mount w/Double Socket Arm - 1" BallMODULAR DESIGNThe rubber ball and socket design offers a secure hold with infinite options and vibration dampening for demanding...

9mm Angled Base Motorcycle Mount w/Short Double Socket Arm & Universal X-Grip® Cell/iPhone CradleThe RAM-B-272-A-UN7 consists of an angled base with 9mm hole, SHORT double socket arm and...

Fork Stem Mount w/Short Double Socket Arm & Universal X-Grip® Cell/iPhone CradleThe RAM-B-176-A-UN7U consists of a fork stem base, short double socket arm and universal X-Grip® cradle...

RAM 1.5" Ball Mount with 6.25" X 2" Rectangle Base, Double Socket Arm & Track Ball™ BaseThe RAM-111B-354-TRA1U consists of a Track Ball™ base that can attach to any track...