RAM Mounting Systems

X-Grip® Phone Mount with 9mm Angled Bolt Head Adapter The RAP-B-272-A-UN7U consists of an angled base with 9mm hole, short composite double socket arm and universal spring loaded RAM®...

Spine Clip Holder with Ball for Garmin Handheld Devices With the Garmin spine mount adapter, make any Garmin handheld device featuring an integrated spine connection RAM® Compatible™...

Composite Ball Adapter with AMPS Plate The RAP-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at...

Composite Drill-Down Double Ball Mount with Rectangle AMPS Plates This composite drill-down double ball mount features two AMPS hole pattern bases with 1" diameter balls. Each base has four...

Spacer Plate Accessory for Flush Mounting A great addition to any surface mounting application, the RAM® cable manager creates an integrated route for electrical wiring and cleanly covers...

8" Upper Pole with Double Swing Arms & 75 x 75mm VESA PlateThe RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole...

Double Ball Mount with 1/4"-20 Male ThreadThe RAM-B-101AU consists of a double socket arm, one 2.5" diameter round base with the universal AMPS hole pattern and universal camera/camcorder base. The...

Double Socket Arm with Dual Extension & Ball AdapterThe RAM-B-201U, Medium length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm,...

Low Profile Composite Double Socket ArmThe RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end...

Composite Double Socket Swivel ArmThe RAP-B-200-12U, double socket swivel arm, consists of double 1" diameter open ball sockets with a 360° rotation point at the center of the arm. The rubber...

EZ-Roll'r™ Cradle with Ball for Apple iPad mini 1-3The RAM-B-202-AP14U consists of a 2.5" round base adapter, with 1" ball, attached to a high strength composite cradle. The cradle includes a...

Square Post Clamp Base 2.5" Wide with 1.5" BallThe RAM-247U-25 consists of a 2.5" clamp base with 1.5" ball. Features:Material: Powder Coated Marine Grade AluminumBall Size: C Size 1.5" Rubber...

Square Post Clamp Base for Posts Up To 1.5" WideThe RAM-247U-15 consists of a 1.5" clamp base with 1.5" ball. Features:Material: Powder Coated Marine Grade AluminumBall Size: C Size 1.5" Rubber...

2-Pack RAM® Roller-Ball™ Paddle & Accessory HolderWith the 2-Pack RAM® Roller-Ball™ holder for tracks, easily secure your heavy-duty net, paddle, gaff hooks, stakeout / push...

RAM® Roller-Ball™ Paddle & Accessory HolderWith the RAM® Roller-Ball™ Clip for Tracks, easily secure your net, paddle, gaff hooks, stakeout/push poles, or BogaGrip®. Its...

GDS® Vehicle Dock for Samsung Galaxy Tab 4 8.0The RAM® vehicle dock with GDS Technology™ is a spring loaded, quick release cradle that offers a secure fit with easy access to the...

1" Ball Mount with 6.25" X 2" Rectangle Base & Diamond BaseThe RAM-B-111-238U consists of a double socket arm, 2.43" x 1.31" diamond base and 6.25" x 2" rectangle base. The diamond base contains...

Tough-Tube™ Rod Holder with Track BaseThe Tough-Tube™ Rod Holder with Track Base kit is compatible with the RAM Tough-Track™ to provide an ideal fishing rod holder mounting...

Tab-Tite™ Cradle for 8" Tablets - Samsung Galaxy Tab 4 8.0 & Tab E 8.0The RAM® Tab-Tite™ spring loaded, quick release cradle offers a secure fit with easy access to the mounted...

Triple Suction Cup Base with 1.5" BallThe RAM-224-3U consists of a triple suction cup base with 1.5" diameter ball. The RAM-224-3U is designed to have an extra strong hold on any smooth non-porous...

1.5" Ball Mount with 2.5" Round Base, Short Arm & 2" x 4" Plate for the Humminbird Helix 7 OnlyThe RAM-202-24-B-202U, powder coated marine grade aluminum mount, consists of a short double socket...

1.5" Ball Mount w/2.5" Round Base, Short Arm & 1.5" x 3" Plate f/Humminbird Helix 5 OnlyThe RAM-202-153-B-202U consists of a round 2.5" diameter round base (Universal AMPs Hole Pattern), short...

Transducer Mount with 18" Rigid Aluminum Rod for Lowrance TotalScanKayak fishing is all about adaptability, and RAM® Mounts offers the widest selection of kayak fishing accessories to adapt to a...

Dual Suction Cup Base with Medium Length Arm & Retention KnobThe RAM-B-189B-201-ALA1-KRU consists of a double 3.3" twist lock suction cup base that is connected to the diamond base with 1"...

2.5" Round Base with 3/8"-16 Female Threaded Hol & 1.5" BallThe RAM-202CNSU consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base with 3/8"-16 female threaded hole. This...

1.5" Tough-Ball™ with 1/4-20 x .625" Male Threaded PostThe RAM Tough-Ball™....Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The...

D Size 2.25" Ball Mount with 2 - 3.68" Round Plate & Medium Length Double Socket ArmThe RAM-D-101U consists of (2 qty) 3.68" diameter round bases and STANDARD length double socket arm. The 3.68"...

Composite 1" Ball Short Length Double Socket Arm w/2.5" Round Base Including AMPs Hole PatternThe RAP-B-103U-A consists of a 2.5" round base and SHORT double socket arm that will accept 1" ball...

Universal D Size Ball Mount with Short Arm and Hi-Torq™ Wrench for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-C-KNOB9H consists of a base with a 2.25” diameter D size ball, a...

Universal D Size Ball Mount with Long Arm for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-E consists of a base with a 2.25” diameter D size ball, a long arm and a 6.25” x 2”...

Universal D Size Ball Mount for 9"-12" Fishfinders and ChartplottersThe RAM-D-115 consists of a base with a 2.25” diameter D size ball, a standard arm and a 6.25” x 2” marine...

Universal D Size Ball Mount with Short Arm for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-C consists of a base with a 2.25” diameter D size ball, a short arm and a 6.25” x...

Fishfinder Mount for Lowrance Hook2 Series - 1" Track MountDesigned for light duty fresh water use, this B size (1”) Track Ball™ kit for the Lowrance Hook² allows users to swap out...

D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ WrenchThe RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3"...

B Size 1" Composite Fishfinder Mount for the Lowrance Hook2 SeriesDesigned for light duty salt water use, this B size (1”) composite drill-down kit for the Lowrance Hook² allows users to...

B Size 1" Fishfinder Mount for the Lowrance Hook2 SeriesDesigned for light duty fresh water use, this B size (1”) aluminum drill-down kit for the Lowrance Hook² allows users to swap out...

Quick-Grip™ Spring Loaded Cradle for Cell PhonesThe RAM Quick-Grip™ device mount is capable of holding a broad range of electronic devices. The spring loaded mechanism and the adjustable...

EZ-Roll’r™ Locking Cradle for the Garmin Fleet 770, 780 & 790The EZ-Roll’r™ cradle for the Garmin Fleet 770/780/790 provides a secure fit with quick and easy one-handed...

B Size 1" Fishfinder Ball Adapter for the Lowrance Hook2 SeriesDesigned for light duty use, this B size (1”) ball base kit for the Lowrance Hook² allows users to swap out the factory...

C Size 1.5" Fishfinder Ball Adapter for the Lowrance Hook2 SeriesDesigned for light duty use, this C size (1.5”) ball base kit for the Lowrance Hook² allows users to swap out the factory...