C Size

RAM Double Socket Arm for 1.5" Ball BasesThe RAM-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection...

RAM 2.5" Round Base w/ AMPs Hole Pattern & 1.5" BallThe RAM-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: Powder Coated Marine...

RAM Stainless Steel Double U-Bolt Base with 1.5" Ball for Rails from 1" to 1.25" in DiameterThe RAM-235U consists of a stainless steel double u-bolt base connected to a 1.5" diameter ball. The double u-bolt base will accommodate rails from 1" to 1.25"...

RAM Short Double Socket Arm for 1.5" Ball BasesThe RAM-201U-B, SHORT double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket...

RAM Long Double Socket Arm for 1.5" Ball BasesThe RAM-201U-D, LONG double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection...

RAM 1.5" Ball Base w/Strap 0.5" to 2" DiameterThe RAM-108BU consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter.Material:Powder Coated Marine Grade Aluminum Ball Size: 1.5"...

1.5" Tough-Ball™ with 1/4-20 x .625" Male Threaded PostThe RAM Tough-Ball™....Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel...

RAM 6.25" x 2" Universal Electronics Base with 1.5" BallThe RAM-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will...

Tough-Ball™ with M10-1.5 x 25mm Threaded StudThe RAP-379U-M101525 consists of a 1.5" diameter RAM® Tough-Ball™ connected to a M10 1.5 x 25mm threaded post. This threaded post matches the thread holes found on a variety of electronic...

RAM 2" x 4" Rectangle Base with 1.5" BallThe RAM-202U-24 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 4" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine...

RAM® Tough-Ball™ with Coupling Nut for WeBoost AntennasThis WeBoost Kit Ball adapter consists of a 1.5" diameter RAM® Tough-Ball™ ball connected to a 3/8"-24 x .375" male threaded post with a coupling nut and two lock washers. The...

RAM 1.5" x 3" Rectangle Base with 1.5" BallThe RAM-202U-153 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated...

RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 1/4"-20 Threaded Male Post for CamerasThe RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the...

RAM 2-7/16" X 1-5/16" Base w/BallPart #: RAM-238UThe powder coated marine grade aluminum base contains a 1.5" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center,...

RAM Quick Release Adapter with 1.5" Diameter Ball for "Rugged Use" Lowrance Elite-5 & Mark-5 Series FishfindersPart #: RAM-202U-LO11The RAM adapter base includes a 1.5" diameter rubber ball and inserts directly to the back of Lowrance Elite 5 and...

RAM® Swivel Double Socket Arm for B Size & C Size Specifications:Product Dimensions: Overall Length: 5.24"Ball Size: B Size (1")/C Size (1.5") Weight Capacity: Standard Use: 2 lbs/Heavy-Duty Use: 1 lbMaterials: High-strength...

RAM 1" x 2" Rectangle Base with 1.5" BallThe RAM-202U-12 consists of a 1.5" diameter rubber ball connected at right angles to a 1" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material:Powder Coated Marine...

1.5" Tough-Ball™ with M6-1 X 6mm Male Threaded PostIntroducing the new RAM Tough-Ball™. Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and...

RAM 1.5" x 2.5" Rectangle Base with 1.5" BallThe RAM-202U-1525 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder...

RAM 2" x 2" Square Base with 1.5" BallThe RAM-202U-22 contains a 1.5" diameter rubber ball connected at right angles to a 2" x 2" square base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade...

RAM 2" x 2.5" Rectangle Base with 1.5" BallThe RAM-202U-225 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated...

RAM 2.5" Round Base (AMPs Hole Pattern) with 0.31-18 female thread & 1.5" BallThe RAM-202U-MT1 consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base with 0.31-18 female thread. This mount has pre-drilled holes, including the...

2.5" Round Base with 3/8"-16 Female Threaded Hol & 1.5" BallThe RAM-202CNSU consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base with 3/8"-16 female threaded hole. This mount has pre-drilled holes, including the universal...

100 x 100mm VESA Plate w/1.5" Ball This RAM-246U consists of a 1.5" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner. Square plate features the VESA hole pattern for connection to a wide variety of...

RAM 75mm X 75mm VESA 3.625" Plate with 1.5" Diameter BallThis RAM-2461U consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge. Material:...

RAM Double 1-1/2" Ball AdapterPart #: RAM-230U The RAM double socket connector allows you to connect two socket arms together and maintain a flexible mount. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note:The "U" in...

Double Socket Swivel ArmSpecifications:Ball/Socket Size: C Size (1")Weight Capacity: 2 lbsMaterials: High strength compositeWeight: 0.65 lbs.

Drill-Down Dashboard Ball Base with Backing Plate - C SizeMeet the new go-to mount and component option for pairing any holder or dock with a dashboard drill-down mount. This part consists of a 1.5 in. C-size rubber ball connected to a 2.5 in. diameter...

RAM Rail Base with "Rust-Proof" Stainless Steel U-Bolt & 1.5" Ball for Rails from 0.5" to 1" in DiameterThe RAM motorcycle handlebar base contains a 1.5" rubber ball designed to sit at right angles to the mounting rail. The "Rust-Proof" stainless...

RAM 2.5" Round Base with the AMPs Hole Pattern, 1.5" Ball & Hardware for Garmin's echo™ 200, 500c & 550c The RAM-202-G4U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including...

Aluminum Pin-Lock Ball Adapter with 1/4"-20 Female Thread - C-SizeThis RAM® ball adapter is made up of a C size 1.5" ball molded to a marine-grade aluminum base. This ball adapter features the RAM® Pin-Lock™ pattern for use with RAM®...

RAM® Ball Adapter with 1/2" NPT Hole & Tightening KnobThe RAM-330U consists of a 1.5" Diameter Ball, attached to a clamp base with a hole for 1/2" NPT pipes. Features:Hardware Included: Assembly HardwareBall Size: c Size (1.5")Weight...

RAM® Ball Adapter with M10 X 1.25" Threaded PostThe RAM-B-349U includes an M10 x 1.25 pitch male thread connected to a 1" rubber ball. The threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch with a 14.5mm flange...

RAM Double Socket Arm with Diamond Plate - C Size Medium This mount consists of the 1.5" C-size diameter ball and socket system with one open socket end; the RAM-201U socket arm is the medium length at 5.69" end to end with 4.66" socket-to-socket...

RAM® Handlebar U-Bolt Ball Base with No HardwareThe RAM-231U-AC1 is a 1.5" diameter C-size ball with a handlebar clamp base. No hardware is included. If you need the installation hardware as well please take a look at RAM-231ZU...

RAM® Tough-Ball™ with 1/2"-13 X .50" Threaded StudWhy call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durability allows for a multitude of...

RAM® Tough-Ball™ with 1/2"-20 X .50" Threaded StudThe RAM Tough-Ball™- Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durability...

RAM® Tough-Ball™ with 1/4"-20 x .25" Threaded StudThe RAM Tough-Ball™. Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durability...

RAM® Tough-Ball™ with 3/8"-16 X .375" Threaded Stud Introducing the new RAM Tough-Ball™.  Why call it tough? Because this latest addition to the RAM product line has steel inside and out.  The seamless transition between...

RAM 1.5" Ball Marine Electronic "RUGGED USE" Base for the Humminbird 100, 300, 500, 700 Series, Matrix Series and Lowrance Elite-5 SeriesThe RAM-107BU is a marine grade aluminum base with 1.5" rubber ball. The base connects to the underside of...