Marine Electronics Mounts

Universal D Size Ball Mount for 9"-12" Fishfinders and ChartplottersThe RAM-D-115 consists of a base with a 2.25” diameter D size ball, a standard arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger...

Universal D Size Ball Mount with Long Arm for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-E consists of a base with a 2.25” diameter D size ball, a long arm and a 6.25” x 2” marine electronic plate with a D size ball for...

The RAM-D-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 3-3/4" diameter round base with 2.25" rubber ball and flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes...

Universal D Size Ball Mount with Short Arm for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-C consists of a base with a 2.25” diameter D size ball, a short arm and a 6.25” x 2” marine electronic plate with a D size ball for...

RAM 2.25" Diameter Ball Mount with 11" X 3" Rectangle Base, & 3.68" Round BaseThe RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes...

RAM Trolling Motor Stabilizer MountThe RAM-108U consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 0.5" to 2" in diameter. The trolling...

RAM Mount 2.25" Ball Mount with 3.68" Round Base & 2" x 5" Rectangular Base for Humminbird HELIX 9, 10 & 12The RAM-D-202-25-C-202, powder coated marine grade aluminum mount, consists of a double socket arm, one round 3.68" diameter round base and one 2"...

RAM Trolling Motor Stabilizer Mount with Long Double Socket ArmThe RAM-108-DU consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 0.5" to 2"...

RAM 2.25" Ball Mount w/ Long Double Socket Arm, 11" x 3" Rectangle Base, and 3.68" Round BaseThe RAM-D-111U-E consists of a long length double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled...

Surface Mount for Humminbird HELIX 7The RAM-202-24-202U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one round 2.5" diameter round base with the universal AMPS hole pattern and one 2" x 4" rectangular base. Rubber...

Vertical Double 6" Swing Arms w/6.25" X 2" Rectangle Base & Vertical Mounting BaseThe RAM double swing arm mount includes two 6" long BENT swing arms mounted on a vertical surface mounting base. At the end of the device mount is a rectangular 6.25 x 2"...

The RAM-111U-D consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, LONG LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up...

RAM 1" Diameter Ball Mount with 6.25" X 2" Rectangle Base & 2.5" Round Base The RAM-B-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1" rubber ball and flat 6.25" x 2"...

RAM 1.5" Diameter Ball Mount with 6.25" X 2" Rectangle Base, STANDARD LENGTH Double Socket Arm & 2.5" Round Base The RAM-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1.5"...

Double 6" Swing Arm with 6.25" x 2" Rectangle Base and Horizontal Mounting BaseThe RAM double swing arm mount includes two 6" long BENT swing arms mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6...

Description:The RAM-111U-B consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, SHORT LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which...

Single 6" Swing Arm with 6.25" x 2" Rectangle Base and Vertical Mounting BaseThe RAM single swing arm mount consists of a 6" long swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2"...

1" Diameter Ball Mount w/Long Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern)The RAM-B-111U-C consists of a long double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled...

Surface Mount for Humminbird HELIX 5Surface Mount 1.5" x 3" Plate & Round Base

RAM® Composite Universal Marine Electronic MountThe RAP-B-111U consists of a 2" x 2.5" rectangle base, STANDARD length double socket arm and 6.25" x 2" rectangle plate. The rectangle base contains pre-drilled holes, including the universal AMPS hole...

1.5" Ball Mount with 2.5" Round Base, Short Arm & 2" x 4" Plate for the Humminbird Helix 7 OnlyThe RAM-202-24-B-202U, powder coated marine grade aluminum mount, consists of a short double socket arm mount, one round 2.5" diameter round base with the...

The RAM antenna mount is designed to hold most VHF and similar antennas. The rubber ball and socket system securely mounts the antenna while allowing for almost infinite adjustment. Mount the antenna on a horizontal or vertical surface or anywhere in...

RAM Small Cable Manager for 1" & 1.5" Diameter Ball Bases The RAM Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application. The RAM Cable Manager is made...

1" Ball Mount with 6.25" X 2" Rectangle Base & Diamond BaseThe RAM-B-111-238U consists of a double socket arm, 2.43" x 1.31" diamond base and 6.25" x 2" rectangle base. The diamond base contains two holes 1.912" from center to center, positioned at...

RAM Large Cable Manager f/2.25" Diameter Ball BasesThe RAM Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application. The RAM Cable Manager is made of...

B Size 1" Fishfinder Ball Adapter for the Lowrance Hook2 SeriesDesigned for light duty use, this B size (1”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply...

LED Spotlight Mount with Medium Size Tough-Claw™The RAM Mounts LED Spotlight has been completely redesigned. We have integrated a new LED bulb that yields a brighter and more efficient light that enables you to add safety and lower power draw to...

1" Ball "Light Use" Composite Mount f/Lowrance Elite-4 & Mark-4 Series FishfindersThe RAP-B-101U-LO11 consists of a composite 2.5" diameter round base with the universal AMPS hole pattern, composite double socket arm and adapter base that inserts...

D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ WrenchThe RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes,...

Double Socket Arm with Two 2.5 Inch Round BasesThe RAM-101-G2U consists of a double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with...

RAM® Marine Electronics Ball AdapterThe RAM-D-115BU, a universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled...

RAM 1" Ball Marine Electronic "LIGHT USE" Mount for the Garmin echo™ 100, 150 & 300cThe RAM-B-101-G4 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and round adapter base that attaches directly to...

B Size 1" Composite Fishfinder Mount for the Lowrance Hook2 SeriesDesigned for light duty salt water use, this B size (1”) composite drill-down kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM®...

RAM® Ball Adapter with 1/4" - 20" Threaded Hole and Hex Post - C SizeThe RAM-337U includes a 1/4"-20 female thread hex hole connected to a 1.5" rubber ball.Specifications:Thread Pitch (inch): 1/4"-20 x 1/2" (female)Ball Size (inch): C Size (1...

RAM Base & Ball w/Garmin Mounting HardwareRAM-202-G2 universal base consists of a 1.5 inch diameter rubber ball, connected at right angles to a 2.5 inch diameter round base. The base has pre-drilled holes, including the universal AMPS hole pattern. The...

Flat Surface Mount w/1" Ball, including M6 X 30 SS HEX Head Bolt, f/Raymarine Dragonfly-4/5 & WiFish DevicesThe RAM-B-202-379-M616U consists of a 2.5" diameter round base with the universal AMPS hole pattern, STANDARD size double socket arm...

Ram Mount - Humminbird - Lowrance Elite/MarkThe RAM-B-107U, powder coated marine grade aluminum mount, consists of a double socket arm, one 2.5" diameter round base and connecting Humminbird/Lowrance marine base The mount is designed with a 1" diameter...

RAM 1" Ball Marine Electronic "Light Use" Mount for the Lowrance Elite-4 SeriesPart #: RAM-B-101-LO11The RAM-B-101-LO11 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and adapter base that inserts directly...

RAM 1.5" Ball Marine Electronic "Rugged Use" Mount f/the Lowrance Elite 5 SeriesPart #: RAM-101-LO11The RAM-101-LO11 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and adapter base that inserts directly to...

RAM Quick Release Adapter with 1" Diameter Ball for "LIGHT USE" Lowrance Elite-4 & Mark-4 Series FishfindersThe RAM adapter base includes a 1" diameter rubber ball and inserts directly to the back of Lowrance Elite 4 and Mark-4 Fishfinders. The adapter...