Marine Hardware

Stud CatchLength: 1-3/4"Width: 5/16"Fastener: #6(4)Material: Brass

Stud CatchLength: 2-1/4"Width: 7/16"Fastener: #8(4)Material: Brass Quick Guide (pdf)

Studded Hand RailLength:12"Stud Post:1-1/2" - Includes 1/4-20 StudMaterial: 304 Stainless Steel

Swivel Safety HaspDimensions: 3" x 1-1/4"Staple Hole: 5/16" DiameterFastener: #8(4)Material: 304 Stainless Steel

Swivel Safety HaspDimensions: 1" x 3"Staple Hole: 1/4" DiameterFastener: #8(4)Material: Chrome Plated Brass

Swivel Safety HaspDimensions: 1-1/8" x 3"Staple Hole: 5/16" DiameterFastener: #8(4)Material: Chrome Plated Zamac*For Freshwater Installation Only

T-Handle Latch - Chrome Plated Zamac/Black Nylon - Locking - Freshwater OnlyFeatures:Nylon Body and CP Zamac handle Locking T-Handle latchShort Offset Cam BarNylon body is BlackNeoprene O-ring & Key fastener includedSurface Depth - 1/8"-3/4"Diameter -...

T-Handle Latch - Chrome Plated Zamac/Black Nylon - No Lock - Freshwater Use OnlyFeatures:Nylon Body and CP Zamac handle non-locking T-Handle latchShort Offset Cam BarNylon body is BlackNeoprene O-ringShaft is 1-3/8" long Chrome Plated Zamac parts should...

T-Handle Latch - Chrome Plated Zamac/White Nylon - No Lock - Freshwater Use OnlyFeatures:Nylon Body and CP Zamac handle non-locking T-Handle latchShort Offset Cam BarNylon body is whiteNeoprene O-ringShaft is 1-3/8" long Chrome Plated Zamac parts should...

T-Handle Latch - Nylon Black/Black - Non-LockingFeatures:Threaded offset cam bar with set screw includedNeoprene O-RingShaft is 1-3/8" long unless otherwise notedSpecifications:Outer Diameter: 3"Cut-Out: 2-1/2"Surface Depth: 1/8" - 3/4"Fastener:...

T-Handle Latch Key ReplacementReplacement Key for Part Numbers: S-226B, S-226W, S-226BLS, 3226B

Take-Apart Hinge - RightAllows engine boxes, hatches, etc. to be easily removed, or laid back completely when open for full access.Size:3-5/8" x 1-1/2"Fastener: #10(4)Material: 316 Stainless Steel Specifications:Color: StainlessMaterial: Stainless...

Take-Apart Motor Box HingeFoolproof take-apart hinge boasts a locking feature that prevents a motor box from vibrating out of position or coming apart until desired.Size:1-1/2" x 3-5/8"Fastener: #10Material: 316 Stainless SteelPin: 2...

Teak Deck Steps15"L x 6"W x 1/2"H

Teak Deck Steps11-1/2"L x 4-1/2"W x 1/2"H

Teak Deck Steps8-3/4"L x 3-1/2"W x 1/2"H

Dish/Cup HolderHolds 4 each of plates and cups19-3/4" L x 4-1/4" D x 11-1/2" H

Dish/Cup/Utensil HolderHolds cups, plates, and flatware16-1/4"L x 9-7/8"H x 7-1/8"D

Edge MoldingOutside CornerEdge MoldingInside radius: 2"Outside radius: 2-1/2"

Finger Pull5/8" Barrel Length1-1/4" Outer DiameterRecess Mount

Folding Drink HolderClosed-4-1/2"W x 3-3/4"H x 1-1/2"D

Four Insulated Drink/Binocular Rack16-1/2"L x 4"W x 3-1/2"HLarger holes hold 4 glasses or cans in insulated drinkholders or 2 glasses or cans in insulated drinkholders and one pair of binoculars

Grate Top Fold-Away TableSolid brass hardwareOpen: 17-3/4" square x 18-1/2"HClosed: 17-3/4"W x 23"H x 2-3/4"DQuick set-up and folds for storageOiled finish

Ground Fault Outlet Cover/Receptacle PlateHeight:5-1/16"Width:3-5/8"

Solid Teak HandrailsFour-Loop Handrail43"L x 2-3/8"H x 1"D

Solid Teak HandrailsSeven-Loop Handrail73"L x 2-3/8"H x 1"D

iPhone RackOutside: 3-1/6"W x 4-3/16"H x 1"DInside: 2-1/2"W x 4"H x 1/2"DCharging cable cut-out in bottomHolds phone with or without protective casePre-drilled mounting holes

Liquid Soap HolderHolds 10-1/2oz oval bottle3-3/4"W x 2-3/4"D x 4-3/8"H

Louvered Door & FrameCutout: 14" x 19"Left Hand Opening

Louvered Door & FrameCutout: 14" x 19"Right Hand Opening

Teak Louvered InsertHeight:16"Width:9-1/8"Depth:3/4"Cut OutHeight:15"Width:8-1/8"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch less than the...

Teak Louvered InsertHeight:6-3/8"Width:11-3/16"Depth:3/4"Cut OutHeight:5-3/8"Width:10-3/16"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch less...

Teak Louvered InsertHeight:7-1/2"Width:9-1/8"Depth:3/4"Cut OutHeight:6-1/2"Width:8-1/2"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch less than...

Teak Marine LumberThickness: 1/2"Width: 1-3/4"Length: 36"

Teak Marine LumberThickness: 7/8"Width: 4"Length:36"

Mini RackGreat for cell phones, wallets & keys4-1/8"H x 5-7/8"W x 3-7/8"DInside dimensions: 4-5/8"W x 2-3/4"D

Navigation Rack5"H x 16-3/4"W x 3-1/2"D

Oblong Drawer Pull4-1/16" LengthRecess Mount, 1/2" Deep2-Pack

Oval Drawer Pull4" LengthSurface Mount2-Pack with hardware

Teak Plugs1/4" Plug20 Pack