Radar/TV Mounts

4 Degree Wedge for Power MountThe most common planing attitude requires 3° - 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little...

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.Features:All-new sleek, modern designFirst all modular system - extremely versatileSimple...

Light Arm for Radar Domes and Sat DomesEdson's 68650 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Radar Dome and Satellite Dome. Light Arm extends 14" toward the stern allowing room for...

Perko Combination Anchor/Steaming Light (50" Wire Length)Edson offers the 67500 Perko Combination Anchor/Steaming Light (50" Wire Length) that is specifically designed for Edson's Vision Series Light Arms...

Low Profile Adapter for Intellian, KVH, Raymarine and Sea-TelSeaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables...

4 Degree Wedge for Open Array RadarsImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine,...

PT2005 - PowerTower® Radar Mount - 6" Aft LeaningThe Scanstrut Composite PowerTower is engineered for outstanding strength with an unparalleled surface finish.  Manufactured using the best composite materials, PowerTower® is molded as a...

APT-F-250-02 Aluminum PowerTower® Radar Mount - 10" Forward LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium,...

Camera Mast Mount f/FLIR M100/M200The ingenious Camera Mast Mount solves the problem of finding a level mounting surface to install cameras onto your powerboat, commercial vessel, RIB or sailboat wheelhouse. designed specifically for the FLIR M100 /...

Camera Plate 3 Fits FLIR M300 Series Thermal Cameras for Dual Mount SystemsThe modular Dual Power Tower has been designed to allow your open array. radar, satdome and camera to be mounted together in one single space saving modular installation...

Central Lightbar for Up to 45cm DomesThe Modular Dual PowerTower has been designed to allow your open array, radar, Satcom and camera to be mounted together in one single space-saving modular installation. Features:Central Lightbar for use with up...

Dual PowerTower® Strut - Open ArrayThe Modular Dual PowerTower® has been designed to allow your open array, radar, Satcom and camera to be mounted together in one single space-saving modular installation. Specifications:Material: 6082...

Mast MountsCompatible Units:Raymarine: 2kW RadomeFantom 24 GMR24HD / 24xHD Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any...

Mast Mount Adapter KitCompatible WithCompatible with Z-Spars, Selden, Isomat, Eurospars MastsFor masts with an integral track at the front which makes it difficult to fit a Scanstrut Mast Mount.FeaturesFits all Scanstrut Mast MountsCompatible with...

Open Array Plate 1 for all Open Array RadarsThe Modular Dual PowerTower has been designed to allow your open array, radar, Satcom and camera to be mounted together in one single space-saving modular installation.Open Array plate 1 (For all Open Array...

SC102 Radar Pole Mount - 8'Totally universal, the Scanstrut SC102 Pole Mount installs your radar onto the deck or transom of your boat.Supplied as a complete kit, you will have everything you need for a quick and easy installation.  The anodized...

SC27 Radar GuardPolished Stainless Steel Guards Protect Radome from damage and reduce wear on the sails.Features:Mounting using radome bolts, no extra fastenings requiredEasy to fit - between mast mount and radar antennaManufactured from marine grade...

WD-RAD-01 Top Plate f/PowerTower® Radar Mounts - 4°Enhance the performance of your radome with the rugged, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat...

1-1/4" Light Bar for Closed Dome Radar - Requires LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in...

1-1/4" Light Bar 13" for FLIR & Searchlights Fold Over - 90° - Must Pick a LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also...

10" Modular Mount FWD Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a...

2" Diameter Compact Light Bar f/Thermal Cameras, Spotlights & Nav Light To Clear Closed Dome Radars *Must Pick an LTB TOPA compact 2” diameter light bar designed to fit Seaview modular mounts that will elevate most searchlights, thermal...

3" Low Profile Satdome Mount f/KVH M1/M1DX/TV1, Intellian i1 & i2, Raymarine 33STVSeaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run...

4° Wedge for 10x10 BaseThis Seaview Base Wedge angles your radar down 4 degrees allowing your radar to be level when the boats bow is up. Will fit all Seaview mounts with a 10″×10″ base plate.Features:Pre-drilled mounting holes...

PM-W6-7This 6° wedge goes between your Seaview mount and mounting surface. The base of the wedge is 7"x7" and is made from machined King Starboard . Utilize wedges to compensate for deck angle or planning attitude of the boat.FeaturesPre-drilled...

Adapter Plate for Simrad HALO™ Open Array Radar Use for Modular Mounts - ADA-R1 RequiredThe Seaview Top Plates are made from a pre-drilled plate that has been incased in a UV resistant ABS plastic. Drill templates come with all Seaview Top Plates...

0-12 Degree Wedge for Satellite MountsThe Seaview Low Profile Adapter Wedge will help you achieve the angle that you need to optimize your Low Profile Adapter or Seaview mount with 8" round base installation. By rotating the AMAW wedge halves you can...

APEX Surface Mount for Starlink Mini - WhiteThe Seaview APEX APXMDM is the perfect direct surface mount kit designed specifically for the Starlink Mini Antenna, engineered to withstand the harshest marine environments. While it's tailored for marine...

Direct Mount 4° Wedge f/Simrad HALO™ Open Array RadarImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands...

Modular Dual MountThe 28" tall Seaview Dual Mount is pre-drilled for up to 4.5' Open Array Radar. The top is for Satellite domes. This Dual Mount is for Open Array Radars & Satdomes or Cameras. The oval hollow mast section allows for easy cable...

Modular Plate for 24" JRC/Lowrance/Northstar/Simrad DX64S DomesSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top...

Modular Plate for Intellian/KVH/Glomex/Thrane & Thrane/Raymarine/Sea-King/Sea-Tel/VDOSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and...

Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount...

Starlink Mini Antenna Mount Top Plate - Fits Mounts Ending in M1 & M2The Seaview modular top plate ADAMINI for the MINI Starlink Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular...

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solutions to your electronics mounting requirements.  Dual Mount for a Radar Dome and a Satellite Dome. Two Mounting Plates required...

Light Arm for Open Array RadarsEdson's 68660 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Open Array Radar. Light Arm extends 28" toward the stern allowing room for your Radar or Satellite...

Vision Series Mount - 6" Aft Angled - Heavy Duty for Open Array RadarsThe Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.Features:All-new sleek,...

Furuno & Sitex Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68510 Vision Series Mounting Plate is designed for both SiTex 2kw, 4kw Radar Domes (T-2041,...

Garmin Mounting Plate for 18" & 24" HD, xHD, HD+ 4kW Radar domesWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68520 Vision Series Mounting Plate is designed for Garmin 18...

Intellian/KVH/Cobham Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68720 Vision Series Mounting Plate is designed for Intellian FB150 & FB250, KVH TracPhone...