Ram Mount Store

Composite 1" Ball Short Length Double Socket Arm w/2.5" Round Base Including AMPs Hole PatternThe RAP-B-103U-A consists of a 2.5" round base and SHORT double socket arm that will accept 1" ball bases. The round base contains pre-drilled holes, including...

Composite 3.25" Diameter Suction Cup Base w/1" BallThe RAP-B-224-1U, composite twist lock mount consists of a 3.25" rubber base that is connected to the (RAP-B-238U), diamond base with 1" rubber ball. The suction cup is designed to have an extra strong...

RAM Mount Composite Diamond Base w/1" BallPart #: RAP-B-238UThe RAP-B-238U, composite diamond base, contains a 1" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center,...

RAM Composite Double Socket Arm f/1" Ball BasesPart #: RAP-B-201UStandard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket...

Composite Drill-Down Double Ball Mount with Rectangle AMPS Plates This composite drill-down double ball mount features two AMPS hole pattern bases with 1" diameter balls. Each base has four pre-drilled holes at each corner with 1.5" x 1.188" hole...

RAM Composite Double Socket Mount with 2.5" Diameter Base and Diamond Ball Base AdaptorSimply choose your preferred mounting location and the possibilities become endless with the RAP-B-138U. Rubber ball and socket technology allows for almost infinite...

RAM Composite Handlebar Swivel BaseThe RAM high strength composite rail mount consists of a locking tooth system with a standard diamond plate end. The mount will accommodate rails up to 1" in diameter. The hole pattern found on the diamond base adapter...

RAM Composite Double Socket Mount Short Arm & with 2/1" Ball Diamond BasesThe RAP-B-102U-A consists of a short double socket arm and two 1" ball diamond bases. The diamond bases contain two holes 1.912" from center to center, positioned at both ends...

RAM Composite Double Socket Mount with 2/1" Ball Diamond BasesThe RAP-B-102U consists of a double socket arm and two 1" ball diamond bases. The diamond bases contain two holes 1.912" from center to center, positioned at both ends. The hole pattern found...

RAM Composite Twist Lock Suction Cup Mount w/ Diamond AdapterDescription:The RAP-B-166-2U consists of a 2.75" suction cup twist lock base, double socket arm and diamond base adapter. The suction cup base is designed to have a strong hold on glass and...

RAM Composite Twist Lock Suction Cup Mount with Short Arm and No Ball BaseBall Size: 1" Rubber BallMaterial: High Strength CompositeColor: Black

RAM Composite Twist Lock Suction Cup with Double Socket Arm and Diamond Base AdapterThe RAP-B-166U consists of a double socket arm, 3.25" suction cup twist lock base and diamond base adapter. The suction cup base is designed to have a strong hold on...

RAM Cradle Holder for the Garmin dezl 560LMT & 560LTThis RAM high strength composite cradle is designed to hold the following devices: Garmin dezl 560LMT Garmin dezl 560LT Features: Open access to all electronic ports including audio port, speaker/mic...

RAM Cradle Holder f/Garmin nüvi 2557LMT, 2577LT & 2597LMTThis RAM high strength composite cradle is designed to hold the following devices: Garmin nüvi 2557LMTGarmin nüvi 2577LTGarmin nüvi 2597LMTFeatures:1. Open access to all...

D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ WrenchThe RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes,...

D Size 2.25" Ball Mount with 2 - 3.68" Round Plate & Medium Length Double Socket ArmThe RAM-D-101U consists of (2 qty) 3.68" diameter round bases and STANDARD length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including...

D Size 2.25" Ball Mount with 2 qty 3.68" Round Plates & Short Length Double Socket ArmThe RAM-D-101U consists of (2 qty) 3.68" diameter round bases and SHORT length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including...

Dashboard Mount with Backing Plate for 7"-8" Tablets with CasesThe RAM® Tab-Tite™ bundle is a rugged mount including the RAM® Tab-Tite™, RAM® Universal Double Ball Mount with Two Round Plates, and RAM® Backing Plate Adapter...

Dashboard Mount with Backing Plate for 8" Tablets with CasesThis vehicle kit consists of a RAM® Tab-Tite™ spring-loaded holder for 8" tablets with a case, a medium B-size double socket arm, two 2.5" diameter round bases that contain the...

Dashboard Mount with Backing Plate for 9"-10.5" Tablets with CasesThis rugged dashboard tablet mount consists of a RAM® Tab-Tite™ spring loaded holder for any 9 in. -10.5 in. tablets with a case, a medium C-size double socket arm, two 2.5 in...

RAM Double 1-1/2" Ball AdapterPart #: RAM-230U The RAM double socket connector allows you to connect two socket arms together and maintain a flexible mount. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note:The "U" in...

RAM 1/4" NPT Female Threaded Hole Base w/Post & 2 1" BallsColor: Black Powder CoatMaterial: Powder Coated Marine Grade AluminumBall Size: 1 inch Rubber Ball

Double Ball Drill-Down Mount with Diamond Plate & Backer PlateThis mount consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, a long double socket arm, a diamond base adapter, and a backer plate. The mount is...

Double Ball Mount with 1/4"-20 Male ThreadThe RAM-B-101AU consists of a double socket arm, one 2.5" diameter round base with the universal AMPS hole pattern and universal camera/camcorder base. The universal camera/camcorder base consists of a 1"...

Double Ball Mount with Backing PlateThis mount consists of a double socket arm, two 2.5" diameter round bases that contain the universal AMPS hole pattern, a 2.10" x 2.60" backing plate, and mounting hardware. The mount is designed with a 1" diameter...

RAM 2.5" Round Base w/Post & 2 1" BallsColor: Black Powder CoatMaterial: Powder Coated Marine Grade AluminumBall Size: 1" Rubber Ball

RAM 1" Diameter Ball Mount with 2/2.5" Round Bases & Mounting Hardware for Garmin Fishfinders & GPSMAP DevicesThe RAM-B-101-G2U consists of a double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the...

RAM 1.5" Diameter Ball Mount with 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-2461 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 3.625" square...

RAM 1" Diameter Ball Double Socket Arm with 2.5" Round Base that contains the AMPs Hole PatternPart #: RAM-B-103UThe RAM-B-103U consists of a 2.5" round base and double socket arm that will accept 1" ball bases. The round base contains pre-drilled...

RAM 1" Diameter Ball Double Socket Arm with Diamond BasePart #: RAM-B-103-238UThe RAM-103-238U consists of a diamond base and double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from...

RAM Double Socket Arm w/Jam Nut f/2.25" Ball BasesPart #: RAM-D-201U-MI1The RAM-D-201U-MI1, standard size double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets,...

RAM Double Socket Arm with Locking Knob for 1.5" Ball BasesThe RAM-201LU, standard double socket arm with locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to...

Double Socket Arm with Retention Knob for B Size 1" BallsThe RAM-B-201-ALA1-KRU, STANDARD length double socket arm with retention knob, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets,...

RAM Double Socket Arm with Small Size Locking Knob for 1.5" Ball BasesThe RAM-201U-BL, standard double socket arm with small size locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end...

RAM Short Double Socket Arm f/3-3/8" BasesPart #: RAM-E-201U-DThe RAM-E-201U-D short double socket arm has a socket at both ends that accomodates 3-3/8" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball...

RAM Short Double Socket Arm with Jam Nut for 2.25" Ball BasesPart #: RAM-D-201U-C-MI1The RAM-D-201U-C-MI1, short double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end...

Double Socket Swivel ArmSpecifications:Ball/Socket Size: C Size (1")Weight Capacity: 2 lbsMaterials: High strength compositeWeight: 0.65 lbs.

RAM Double Socket Swivel Arm for 1" Ball BasesThe RAP-B-200-2U consists of double 1" diameter open ball sockets with a 360 degree rotation point at the center and a connecting swivel joint that rotates forward and back 180x. The rubber ball and socket...

Double Suction Cup BaseRAM suction cups are regarded as one of the most impressive suction cups inthe world. The incredible holding power is surprising when considering howmost suction cups function. When two suction cups are used together...

RAM Double Swing Arm w/4" Male & No Female Tele-PoleSwing Arm connects to a 75mm x 75mm VESA Plate.