Springfield Marine

Thread-Lock™ Aluminum Surface Mount Base - 10"High-strength aluminum surface mount base with anodized finish. Use with any Thread-Lock™ fixed-height post (sold separately). Can be used...

2-3/8" Thread-Lock™ Fixed-Height Post - 13"Sturdy 2-3/8″ high-strength aluminum post for use while underway. Locking collar prevents unintentional removal from base. Use with...

KingPin™ Standard Square Steel Base with Satin E-Coat - 7"x7"Standard square mild steel base with satin finish. 3″ below deck needed. Requires a 2-1/2″ hole in the deck.

KingPin™ Standard Square Steel Base with Brass - 7"x7"Standard square stainless steel base with satin finish. 3″ below deck needed. Requires a 2-1/2″ hole in the deck.

2-3/8" Plug-In Hi-Lo Replacement BushingReplacement bushing for 2-3/8″ Plug-In™ Hi-Lo seat mount. Helps to distribute the weight load across the top of the post.

2-3/8" Locking Fixed-Height Post - 13"Anodized to withstand all conditions. Heights are from the top of the post to the deck when the post is installed. Fits into any 2-3/8″ Plug-In™...

Workhorse Air-Ride Slide & Swivel - 4"10-1/2″ x 14-1/2″ x 1/4″ aluminum formed slide plate with anodized aluminum finish and heavy-duty stainless steel lock pin. Large,...

Elite Slide & Swivel - 4"8-1/4″ x 13″ seat mounting platform. Anodized slide and polish post mount fits over 4″ pedestals, locks and tightens securely to prevent wobble. Large...

Universal Chair Mounting PlateAdapts a swivel mount to fit most seat mount patterns. High-strength aluminum. Use with any Springfield® marine swivel. Adds structural support to rotational molded...

2" Taper-Lock™ Hi-Lo BushingReplacement bushing for the top of 2″ Hi-Lo posts. For use on models 2020 and earlier.

2-3/8" Trac-Lock™ III Swivel BushingReplacement bushing for 2-3/8″ Trac-Lock™ III slides and swivels. Use on Trac-Lock™ III 2002 and newer.

Taper-Lock™ Seat Swivel BushingReplacement bushing for Taper-Lock™ Hi-Lo swivel. Washer included.

5-Legged Deck Base Caster Replacement - 75mm with Brake Urethane5-pack caster replacements for a 5-legged deck base.

KingPin™ Base Socket CoverPlastic KingPin™ cover keeps sockets clear when not in use. Use on KingPin™ 3/4″ pin base. (sold as each).

SpringLock™/Clip-Lock™ Base Socket Cover3/4″ Deck Base Socket Cover fills the opening when not in use, creating a flush surface. (sold as pairs).

Brass KingPin™ BushingBrass replacement bushing for KingPin™ base.

Support Bushing KitReplacement bushing kit and V-bumper for pivot brackets on Guardian Deluxe and Standard heads to reduce abrasion on the lower unit.

Bolt-On Clevis PinReplacement tension clip between the extrusion and bolt-on T-brace.

Nylon KingPin™ BushingNylon replacement bushing for KingPin™ base (sold as each).

Spring-Lock™ Base Repair Kit - 2 BushingsThe repair kit for Spring-Lock™ bases includes one thin bushing and one thick bushing. For models 2010 and earlier. Base repair kits include: 1/2...

KingPin™ Taper-Lock™ AdapterInserts into Taper-Lock™ base to accept KingPin™ posts or mounts.

Spring-Lock™ Power Pedestal Repair KitRepair kit for Spring-Lock™ Power-Rise pedestals.

Spring-Lock™ Replacement Post BushingReplacement bushing for the top of the non-locking Spring-Lock™ post.

Spring-Lock™ Replacement End CapReplacement Spring-Lock™ end cap for securing the locking latch in the post.

Spring-Lock™ Non-Locking Post - 13.5"Hefty 1-3/4″ diameter stainless steel posts. Use with non-locking Spring-Lock™ seat mount ot any non-locking Spring-Lock™ base (sold...

Spring-Lock™ Non-Locking Post - 15.5"Hefty 1-3/4″ diameter stainless steel posts. Use with non-locking Spring-Lock™ seat mount ot any non-locking Spring-Lock™ base (sold...

Non-Locking Spring-Lock™ Seat MountE-coat rust-resistant finished stamped steel. Adds 1-1/2″ to the height of the post. Use with any Spring-Lock™ or Clip-Lock non-locking post...

KingPin™ Standard Square Steel Base - 7"x7" - Kennedy BaseStandard square mild steel base with black krinkle finish. 3″ below deck needed. Requires a 2-1/2″ hole in deck.

KingPin™ Standard Fixed-Height Offset Post - 13"Hefty 1-3/4″ diameter stainless steel post with mild steel e-coat pin. Provides a full 5″ of offset extension. Use with any...

Trac-Lock™ Hi-Lo Fixed-Height Post - 13"2-3/8″ Anodized aluminum post. Use with seat mount (#1600205, sold separately). Use with any Taper-Lock™ base (sold separately).

5-Legged Deck Base with Plate33″ Diameter 5-legged deck base with pre-drilled 5/16″-18 tap mounting plate to accept any Springfield® Marine 12″ or 9″ round pedestal base...

4" Offshore Fixed-Height Helm Pedestal PackagePackage includes heavy-duty 4″ Workhorse slide & swivel with anodized finish, fixed-height brite dip 4″ pedestal with 12″ round...

4" In-Shore RS2 Pedestal PackagePackage includes locking Workhorse swivel mount with anodized finish, high-strength polished aluminum fixed-height 4″ pedestal with 12″ round base, 316...

4" Elite Fixed-Height Pedestal - 30"4″ Pedestal of .213″ thick aluminum with 12″ round base, polished finish. The pedestal is sized and pressed into base then rim welded for...

2-3/8" Clipper Adjustable PackagePackage includes 2-3/8″ adjustable pedestal with 10″ round base and non-locking Trac-Lock™ swivel. Pedestal adjusts in 1-inch increments.

2-3/8" Clipper Fixed-Height Pedestal - 13"2-3/8″ Pedestal with 10″ round base and 9″ mounting pattern. Use with locking Trac-Lock™ slide or swivel (sold separately).

2-3/8" Plug-In™ Stainless Steel Square Base - 7"x7"Made of stainless steel. Suitable for above or under carpet applications. Below deck mount requires a 3-3/4″ hole in the deck. Use with...

2-3/8" Locking Fixed-Height Post - 13"Anodized to withstand all conditions. Heights are from the top of the post to the deck when the post is installed. Fits into any 2-3/8″ Plug-In™...

2-3/8" Plug-In™ Locking 3-Piece Pedestal Package - 12"Locking 3-piece package includes locking Trac-Lock™ swivel seat mount, Plug-In™ Hi-Lo fixed height post with anodized finish,...

In-Shore LE1 Adjustable Mainstay PackageHeavy-duty adjustable mainstay package includes locking Trac-Lock™ air-ride slide & swivel, 316 electro-polished stainless steel half-round...