Surface Mount

Tough-Track™ Overall Length - 14.5"With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and...

Spacer Plate Accessory for Flush Mounting A great addition to any surface mounting application, the RAM® cable manager creates an integrated route for electrical wiring and cleanly covers installation holes. This cable manager is made of...

2" x 5" Rectangle Base with 2.25" BallThe RAM-D-202U-25 consists of a 2.25" diameter rubber ball connected at right angles to a 2" x 5" rectangular base. This mount has pre-drilled holes at each corner of the base.Features:Material: Powder Coated Marine...

Steel Adhesive Plate Adapter for Magnetic Mounts This round steel adhesive plate is an ideal solution for enabling any RAM® magnetic base – eliminating the need to drill into a vehicle’s dash or other flat surfaces. Featuring...

RAM Mount 1.5 Inch Ball Double Socket Arm with 2.5 Inch Round BaseThe RAM Mount RAM-103U mount, with standard arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM...

RAM 1.5" Diameter Ball Mount with Long Double Socket Arm & 2 2.5" Round Bases w/AMPs Hole PatternThe RAM-101U-D consists of a long double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1...

Tough-Track™ Overall Length - 7"With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and is...

RAM 1" Diameter Ball Mount with 2/2.5" Round Bases that contain the AMPs hole patternThe RAM-B-101U consists of a double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1" diameter...

RAM® Double Ball Mount with 1/4"-20 Male Thread - Short ArmThe RAM-B-101AU consists of a double socket arm, one 2.5" diameter round base with the universal AMPS hole pattern and universal camera/camcorder base. The universal camera/camcorder base...

Ram 1" Diameter Ball Mount with 2/2.5" Round Bases and Short ArmThe RAM-B-101-A consists of a SHORT double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1" diameter patented...

RAM 1.5" Diameter Ball Mount with 2/2.5" Round Bases - AMPs Hole PatternThe RAM-101U consists of a double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1.5" diameter patented...

RAM 1.5" Diameter Ball Mount with Short Double Socket Arm & 2/2.5" Round Bases w/AMPs Hole PatternThe RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1...

RAM Mount 1.5 Inch Ball Short Arm with 2.5 Inch Round BaseThe RAM Mount RAM-103U-B mount, with short arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases...

RAM Mount 1.5" Diameter Ball Flat Surface Mount w/2.5" Round Base & Diamond BaseThe RAM-138U consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, double socket arm and diamond base adapter. The mount is designed with a 1...

1.5" Diameter Ball Mount with Long Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-D-2461 consists of a LONG double socket arm, 2.5" diameter round base with the universal AMPS hole...

10" RAM® Hand-Track™ with 16" Overall LengthAvailable in lengths ranging from 4" to 30", the RAM® Hand-Track™ is an ideal track and handrail solution for ATVs, boats, kayaks, and more. Compatible with all RAM track mounts, the...

2" x 3" Rectangle Base with 2.25" BallContains a 2.25" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base.

RAM 1.5" Diameter Ball Mount with Short Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-B-2461 consists of a SHORT double socket arm, 2.5" diameter round base with the universal...

4.75" Square Base VESA 75mm & 100mm Hole Patterns with Surface Mount - 1.5" Rubber Ball SizeThe RAM-101U-246 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 4.75" square plate with the VESA hole pattern...

4.75" Square Base VESA 75mm & 100mm Hole Patterns with Surface Mount - 2.25" Rubber Ball "D" SizeThe RAM-D-101U-246, heavy duty universal assembly, includes a universal base piece to mount heavy devices to a flat surface and a 4.75" x 4.75" face plate...

The RAM-101U-D-246 consists of a long double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 4.75" square plate with the VESA hole pattern. The VESA plate contains a 75mm X 75mm and 100mm X 100mm hole pattern. Designed into...

The RAM-101U-B-246 consists of a short double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 4.75" square plate with the VESA hole pattern. The VESA plate contains a 75mm X 75mm and 100mm X 100mm hole pattern. Designed...

RAM 6.25" X 2" Rectangle Base with 1" BallThe RAM-B-111BU consists 1" diameter rubber ball connected to a flat 6.25" x 2" rectangle base. The base contains different combinations of pre-drilled holes which will match up to many electronic devices and...

RAM 1" Diameter Ball Flat Surface Mount w/ 2.5" Round Base & Diamond BaseDescription:The RAM-B-138U consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, double socket arm and diamond base adapter. The mount is designed...

Composite 1" Ball Short Length Double Socket Arm w/2.5" Round Base Including AMPs Hole PatternThe RAP-B-103U-A consists of a 2.5" round base and SHORT double socket arm that will accept 1" ball bases. The round base contains pre-drilled holes, including...

Composite Drill-Down Double Ball Mount with Rectangle AMPS Plates This composite drill-down double ball mount features two AMPS hole pattern bases with 1" diameter balls. Each base has four pre-drilled holes at each corner with 1.5" x 1.188" hole...

D Size 2.25" Ball Mount with 2 - 3.68" Round Plate & Medium Length Double Socket ArmThe RAM-D-101U consists of (2 qty) 3.68" diameter round bases and STANDARD length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including...

D Size 2.25" Ball Mount with 2 qty 3.68" Round Plates & Short Length Double Socket ArmThe RAM-D-101U consists of (2 qty) 3.68" diameter round bases and SHORT length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including...

Double Ball Mount with 1/4"-20 Male ThreadThe RAM-B-101AU consists of a double socket arm, one 2.5" diameter round base with the universal AMPS hole pattern and universal camera/camcorder base. The universal camera/camcorder base consists of a 1"...

Double Ball Mount with Backing PlateThis mount consists of a double socket arm, two 2.5" diameter round bases that contain the universal AMPS hole pattern, a 2.10" x 2.60" backing plate, and mounting hardware. The mount is designed with a 1" diameter...

RAM 1.5" Diameter Ball Mount with 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-2461 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 3.625" square...

RAM 1" Diameter Ball Double Socket Arm with 2.5" Round Base that contains the AMPs Hole PatternPart #: RAM-B-103UThe RAM-B-103U consists of a 2.5" round base and double socket arm that will accept 1" ball bases. The round base contains pre-drilled...

Drill-Down Dashboard Mount with Backing Plate - C Size MediumMeet the new go-to mount and component option for pairing any holder or dock with a dashboard drill-down mount. The RAM-101-225B2U consists of a C-size medium-length double socket arm, two...

Drill-Down Dashboard Mount with Backing Plate - C Size ShortMeet the new go-to mount and component option for pairing any holder or dock with a dashboard drill-down mount. This mount consists of a C-size short-length double socket arm, two round 2.5"...

RAM Flex Adhesive Base w/1" BallPart #: RAP-B-378UConsists of a 2.5" composite base that connects to a 1" ball, double-sided adhesive PSA stick pad and sealed alcohol prep pad. This base will attach to all RAM double socket arms that will accommodate 1"...

RAM Flat Surface Mount, Short Double Socket Arm & 1" Diameter Ball with Custom GoPro Hero AdapterThe RAM-B-138-A-GOP1U consists of a 2.5" diameter round base with the universal AMPS hole pattern, SHORT size double socket arm and 1" diameter ball with...

RAM 1" Diameter Ball Long Double Socket Arm with 2.5" Round Base that contains the AMPs Hole Pattern - Overall Length: 6.62"The RAM-B-103U-C consists of a 2.5" round base and LONG double socket arm that will accept 1" ball bases. The round base contains...

RAM® Backing Plate Adapter 2.10” x 2.60” steel backing plate with hardware and two-hole patterns: 4-hole AMPS pattern with #8-32 threaded holes, and 4-hole 2" x 2.5" pattern with #10-24 threaded holes. Included hardware can attach...

RAM® Double Ball Mount with 1/4"-20 Male Thread - Long ArmHole Pattern: 4-Hole AMPS: 1.181" x 1.496"3-Hole 120-Degree: 1.812" DiameterFeatures:Overall Height: 10.85"Socket to Socket Length: 8"Ball/Socket Size: C Size - 1.5"Materials:...

RAM® Double Ball Mount with 1/4"-20 Male Thread - Medium ArmThe RAM-101AU consists of a double socket arm mount, one round 2.5" diameter base with the universal AMPS hole pattern and round base with a 1/4"-20 threaded steel stud. The round base...