Maxwell

Washer Spring - 6mm - 304 Stainless Steel6mm304 Stainless Steel

Screw Set HEX HD M8 x 25 - Stainless Steel 304Features:Screw Set HEX HDM8 x 25Stainless Steel 304

Stud 3/8mm x 120mm - 1000-3500 - Stainless SteelFeatures:Dimensions: 3/8mm x 120mm1000-3500Stainless Steel

AA342 Remote for Dual Windlasses - 4 OutputsThis is a handheld wired roving dual windlass controller. The remote has 4 outputs unit that can be installed to meet your specific requirements...

RC12-10 12V Windlass EDC - 3/8" Chain & 3/4" RopeThe RC12-10 automatic rope/chain windlass is built to effortlessly retrieve and deploy a 3/8 in. short link chain and 5/8" to 3/4 in. 8-Plait...

RC10-8 Capstan 12V Windlass - 5/16" Chain & 5/8" RopeThe stainless steel (AISI 316) RC10 Series rope/chain windlass is part of Maxwell’s upper mid-range line-up and is suitable for boats...

Dual Install T Junction ConnectorAA560 Dual Install T Junction Connector

RC10-10 Capstan Windlass 12V - 3/8" Chain & 5/8" RopeThe combined stainless steel and chromed bronze RC10 fully automatic windlass series is designed to effortlessly retrieve and deploy 8mm...

RC12/10 Capstan Windlass - 24V - 3/8" Chain & 3/4" RopeThe RC12 fully automatic windlass series is designed to effortlessly retrieve and deploy 10mm (3/8") short link chain and 16mm (5/8") to...

RC10/10 24V Capstan Windlass for 3/8" Chain & 5/8" RopeThe combined stainless steel and chromed bronze RC10 fully automatic windlass series is designed to effortlessly retrieve and deploy 8mm...

RC 12-12 Vertical Windlass 1/2" Chain, 3/4" Rope, 12VPackage IncludesWindlassOn/Off Breaker PanelReversing SolenoidUp/Down Panel SwitchHandleThe RC12 Series incorporates Maxwell's latest stylish...

Fixed Bow Roller - Size 1Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain.Size 1:L - 205mm (8-1/8")B - 72mm (2-7/8")H - 74mm (3")C - 44mm (1-3/4") Quick Guide (pdf)Brochure...

HRC10 Horizontal Rope Chain Windlass - 12V No Capstan 3/8" Chain, 5/8" RopeMaxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully...

RC12-12 Vertical Capstan 12V Windlass - 1/2" Chain & 3/4" RopeThe RC12-12 automatic rope/chain windlass is built to effortlessly retrieve and deploy 1/2 in. short link chain and 3/4 in. to 7/8...

VC 1000 12V Vertical Capstan WindlassThe stainless steel (AISI 316) fluted capstan VC series is designed for simple, low-cost anchor recovery on smaller boats and rope hauling on larger vessels...

VWC1000 Windlass 5/16" - 3B ChainThe VWC Series of windlasses is designed for automatic (hands-free) handling of chain-only anchor rodes. They have an integral chainpipe and chain stripper built...

RC8-8 Windlass with Capstain - 12V - 5/16" Chain to 9/16" or 5/8" RopeRC Rope/Chain SeriesMaxwell's RC series windlasses proudly follow in the highly successful footsteps of the Freedom, Liberty and...

RC8 24V Windlass - 100W 5/16" Chain to 5/8" RopeFeatures:The stainless steel RC8-6 fully automatic rope/chain windlass is designed to effortlessly retrieve and deploy 6mm/7mm (1/4") chain spliced to...

RC8 12V Windlass - 100W 5/16" Chain to 5/8" RopeFeatures:The stainless steel RC8-6 fully automatic rope/chain windlass is designed to effortlessly retrieve and deploy 6mm/7mm (1/4") chain spliced to...

RC12/10 12V Capstan WindlassThe RC12 fully automatic windlass series is designed to effortlessly retrieve and deploy 10mm (3/8") short link chain and 16mm (5/8") to 20mm (3/4") three strand or...

AA Sensor Cable for AA150 & AA560 6.5M (21.3')The Maxwell AA Sensor Cable is compatible with AA150 & AA560 Rode Counters.Features:The male plugs on both ends of this cable are directly...

AA Sensor Cable for AA150 & AA560 15M (49.2')The Maxwell AA Sensor Cable is compatible with AA150 & AA560 Rode Counters.Features:The male plugs on both ends of this cable are directly...

Replacement Stripper for RC6/RC8 WindlassWindlass Replacement Stripper Arm Assembly KitApplications: Maxwell RC6 and RC8 Windlass

Sensor & Magnet Kit for AA150, 560, 710 & 730 - GrayMaxwell's Sensor and Magnet Kit is designed specifically for AA150, 560, 710 and 730.Features:Includes Sensor and MagnetColor: Gray

Spiral Retaining RingAnchor windlass spiral retaining ring (SMALLEY WSM75S-16)

V-Ring V55SV55S V-ring seal for Maxwell windlass

Windlass Replacement NLP Washer WaveApplications: 2200 / 3500 WindlassesMaterial: Stainless Steel

Windlass Replacement Disc Spring - 2200-4000 Series ClutchApplications: 2200-4000 Series ClutchRequires (2) per WindlassSold Individually

Quick Release ClipWindlass Quick Release Clip

Key 300-150010mm x 90mm x 60mm

Stainless Steel Key9.53 x 9.53 x 50Stainless Steel

Pin RollMaxwell Pin Roll spare part

Seal Kit f/2200 & 3500 Series Windlass GearboxesKit includes:(2) 55 x 70 x 8 oil seal(2) 20 x 2 O-ring(1) Sight glass(1) O-ring ID 90mm section dia. 2mm(1) 25 x 47 x 7 oil seal

Seal Kit for 1200 SeriesSpare seal kit for Maxwell VWC 1200 and VWCLP 1200 windlasses

Seal Kit for 800 SeriesSpare seal kit for Maxwell 800 series (old style) windlasses

Replacement Pressure Arm f/HRCFF WindlassFeatures:Applications: HRCFFSold Individually

Windlass Pressure Arm Upgrade Kit - Old ModelFeatures:Applications: Older (White Finish) HRC 6 and HRC 8 WindlassesKit includes pressure arm, clip and clip insulatorEnsures trouble-free rode...

Circlip - 1-1/2" Stainless Steel1-1/2"Stainless Steel

Maxwell Marine Replacement Windlass StripperFeatures:Applications: Maxwell Liberty 1700 WindlassChainwheel: 5/16"Includes Assembly Screw

Bolt - Hex HD 5/16" UNC x 1-1/2"SS304