Radar/TV Mounts

24" Modular Mount AFT Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a...

4-Degree Wedge for Most Closed Dome Radars - 18"-24" - BlackImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such...

5" Aft Leaning Mount with ADAR1 Top PlateThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost-effective choice...

5" Modular Mount Aft Raked 7x7 Base Top Plate Required - BlackThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost...

PM5-FMT-8Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little...

5" Thermal Camera Mount f/FLIR M100 & M200 - 8" Round BaseGet the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The...

5" Vertical Camera Mount for Sionyx - BlackGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct the view of your camera. The 8" diameter...

5.25" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base PlateSeaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable...

5.5" Thermal Camera Mount Aft Leaning for M100 & M200 SeriesGet the most out of your FLIR M100 and M200 Series Thermal Camera with Seaview's Aft-Leaning Camera Mount. Measuring 5.5" tall, the Seaview Aft-Leaning Camera Mount provides flexibility in...

5.5" Thermal Camera Mount for FLIR M300 Series CamerasSeaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for...

5.63" Vertical Searchlight Mount for RCL95 - 8" Round BaseplateGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your camera's view...

6.38" Vertical Searchlight & Thermal Camera Mount with 8" Round Base PlateGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your...

ADAF3 Modular Top Plate for FLIR M300 Series Thermal Cameras f/Mounts Ending in M1 or M2Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome...

Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - BlackThe Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part...

Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - WhiteThe Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part...

Low Profile Adapter for 24" SatdomesSeaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for...

APEX Surface Mount for Starlink Mini - BlackThe Seaview APEX APXMDM is the perfect direct surface mount kit designed specifically for the Starlink Mini Antenna, engineered to withstand the harshest marine environments. While it's tailored for marine...

APEX Surface Mount for Starlink Standard Gen 3 Antenna - BlackThe Seaview APEX APXG3DMV2 is a direct surface mount kit tailored for the Starlink Standard Gen 3 Antenna, specifically engineered for the demanding marine environment. Its suitability for...

Black Modular Plate for FLIR M300 Series Thermal Cameras for Mounts Ending in M1 or M2Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome...

C5 Certified Light Bar Top with LTBLED12C5 Masthead Light & Threads for GPSUniversal light bar top for GPS or wind instrument with 12" light post and LED navigation light (LTBU1A + SVLTP12 + LTBLED12C5). Specifications:Height: 12"Type: Light/GPS...

Compact Light Bar for Thermal Cameras, Low-Light Cameras, & Search Lights (To Clear Closed Dome Radars) - No LightSeaview light bars are made from aluminum and powder-coated brilliant white and are compatible with Seaview Modular Mounts (polished S...

Complete Spreader Kit for Radars & Satdomes for Mounts Ending in M1This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that...

Direct Mount 4° Wedge for Furuno DRS4DRadar Wedge for Furuno 24" radar domes; Geonav 24" radar domes; JRC 15" radar domes; Simrad DX64S; Sitex 24" T761 radar domes (RW4-6) by Seaview®. Radar wedges are designed to be used directly between the...

Direct Mount Adapter Plate for Simrad HALO™ Open Array RadarSeaview's Simrad HALO™ adapter plate is a great solution when replacing an existing Simrad Broadband 3G™, Broadband 4G™, Raymarine or Garmin closed dome radar. Mounting...

Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base - BlackThe Seaview SRM200WB8 Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for...

Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base - WhiteThe Seaview SRM200WB8 Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) that has been specifically designed for the harsh marine environment. If its good for...

Light Bar for M100 & M200 FLIR for M2 Mounts Only - Must Pick LTB TopA 2” diameter Light Bar designed to work with FLIR M100/M200 Series. Contact Seaview directly to make sure this light bar is right for your boat. Not intended for fast ocean...

Light Bar Top with LTBLED12 Masthead Light & Threads for GPSLight bar top with 1.25" powder-coated aluminum light post and our LTBLED12 (LED combination masthead all around light) and 1"-14 threaded adapter for GPS.

LTB Top Universal for Mounting Your Light/GPSThe LTB-U1A is a Universal Light Bar Top for mounting your own light and or GPS. Specifications:Type: Light/GPS BracketsBox Dimensions: 5"H x 8"W x 8"L WT: 1 lbsUPC: 839662009539Quick Guide...

1-1/4" Light Bar for Open Array RadarSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different...

Mast Bracket with Flybridge Adapter Kit18" Radar Mast Platform with Flybridge Adapter Kit. Sailboat and Trawler Radar Mast Platforms.Features:Anodized Marine Grade Aluminum and Powder Coated Brilliant WhiteHeavy duty swiveling feet fit most mast and...

Mast Mount for FLIR M300 Series Fits Mast with 2-5/8" or LargerAchieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high...

Mast Mount for Starlink MiniThis SM18SLM Seaview Mast Mount for the Starlink Mini antenna has been specifically designed for the marine environment (chem-treated with a 3 part polyurethane prime and powder coat to ensure the best possible finish and...

Mast Mount for Starlink Standard Gen 3 AntennaThis Seaview Mast Mount for the Starlink Standard Gen3 antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best...

Modular Plate for All FB150 and FB250 DomesSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result...

Modular Plate for Glomex/Intellian/KVH/Thrane & Thrane/Raymarine/VDOSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With...

Modular Plate for KVH/Intellian/Raymarine/Sea-King/Sea-Tel/VDOSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top...

Modular Plate to Fit Searchlights & Thermal Cameras on Seaview Mounts Ending in M1 or M2The Seaview ADABLANK is a universal modular top plate for mounting a searchlight or thermal camera for Seaview Modular Mounts ending in M1 or M2.King...

Performance Gen 3 Starlink Antenna Mount with 8 Degree Wedge Base - BlackThe Seaview SRM300WB8 surface mount for the Starlink Performance Gen 3 Antenna has been specifically designed for the harsh marine environment. If it's good for the marine...

Performance Gen 3 Starlink Antenna Mount with 8 Degree Wedge Base - WhiteThe Seaview SRM300WB8 surface mount for the Starlink Performance Gen 3 Antenna has been specifically designed for the harsh marine environment. If it's good for the marine...