Ram Mount Store

Universal D Size Ball Mount for 9"-12" Fishfinders and ChartplottersThe RAM-D-115 consists of a base with a 2.25” diameter D size ball, a standard arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger...

RAM® Quick-Grip™ XL Large Phone HolderThis version of the spring-loaded RAM® Quick-Grip™ holder provides a secure fit for a variety of large phones and other devices. The adjustable side keepers ensure that devices like GPS units and...

RAM Trolling Motor Stabilizer MountThe RAP-400-202U consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and Tough-Claw®. The trolling motor stabilizer will take every bit of the vibration out of...

Universal D Size Ball Mount with Long Arm for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-E consists of a base with a 2.25” diameter D size ball, a long arm and a 6.25” x 2” marine electronic plate with a D size ball for...

The RAM-D-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 3-3/4" diameter round base with 2.25" rubber ball and flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes...

Universal D Size Ball Mount with Short Arm for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-C consists of a base with a 2.25” diameter D size ball, a short arm and a 6.25” x 2” marine electronic plate with a D size ball for...

RAM 2.25" Diameter Ball Mount with 11" X 3" Rectangle Base, & 3.68" Round BaseThe RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes...

RAM Trolling Motor Stabilizer MountThe RAM-108U consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 0.5" to 2" in diameter. The trolling...

RAM Mount 2.25" Ball Mount with 3.68" Round Base & 2" x 5" Rectangular Base for Humminbird HELIX 9, 10 & 12The RAM-D-202-25-C-202, powder coated marine grade aluminum mount, consists of a double socket arm, one round 3.68" diameter round base and one 2"...

RAM Trolling Motor Stabilizer Mount with Long Double Socket ArmThe RAM-108-DU consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 0.5" to 2"...

RAM 2.25" Ball Mount w/ Long Double Socket Arm, 11" x 3" Rectangle Base, and 3.68" Round BaseThe RAM-D-111U-E consists of a long length double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled...

Surface Mount for Humminbird HELIX 7The RAM-202-24-202U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one round 2.5" diameter round base with the universal AMPS hole pattern and one 2" x 4" rectangular base. Rubber...

Vertical Double 6" Swing Arms w/6.25" X 2" Rectangle Base & Vertical Mounting BaseThe RAM double swing arm mount includes two 6" long BENT swing arms mounted on a vertical surface mounting base. At the end of the device mount is a rectangular 6.25 x 2"...

The RAM-111U-D consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, LONG LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up...

Ram Rod Unpackaged 2000 Holder With Bulkhead MountThe RAM-114-BU, high strength composite fishing rod holder with bulkhead base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360...

RAM Flat Surface Horizontal Single Swing Arm Mount The RAM single swing arm mount consists of a 6" long BENT swing arm mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are...

2.5" Composite Round Base w/AMPS Hole Pattern & 1.5" BallThe RAP-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.Material: High Strength...

RAM 1" Diameter Ball Mount with 6.25" X 2" Rectangle Base & 2.5" Round Base The RAM-B-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1" rubber ball and flat 6.25" x 2"...

RAM 1.5" Diameter Ball Mount with 6.25" X 2" Rectangle Base, STANDARD LENGTH Double Socket Arm & 2.5" Round Base The RAM-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1.5"...

Double 6" Swing Arm with 6.25" x 2" Rectangle Base and Horizontal Mounting BaseThe RAM double swing arm mount includes two 6" long BENT swing arms mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6...

Description:The RAM-111U-B consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, SHORT LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which...

RAM Double Socket Arm for 1.5" Ball BasesThe RAM-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection...

Single 6" Swing Arm with 6.25" x 2" Rectangle Base and Vertical Mounting BaseThe RAM single swing arm mount consists of a 6" long swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2"...

This RAM high strength composite cradle is designed to hold the following devices: Garmin StreetPilot c530Garmin StreetPilot c550Garmin StreetPilot c580Garmin StreetPilot i2Garmin StreetPilot i3Material:High Strength Composite Note:The "U" in the part...

No-Drill™ Universal Laptop MountThe RAM® Universal No-Drill™ Laptop features a heavy-duty steel mounting base designed to fit a variety of vehicles. Using the front bench or passenger side seat rail bolts as attachment points, existing...

Tough-Track™ Overall Length - 14.5"With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and...

1" Diameter Ball Mount w/Long Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern)The RAM-B-111U-C consists of a long double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled...

RAM Stainless Steel Double U-Bolt Base with 1.5" Ball for Rails from 1" to 1.25" in DiameterThe RAM-235U consists of a stainless steel double u-bolt base connected to a 1.5" diameter ball. The double u-bolt base will accommodate rails from 1" to 1.25"...

Surface Mount for Humminbird HELIX 5Surface Mount 1.5" x 3" Plate & Round Base

Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with C Size 1.5" BallThe RAM® Torque™ handlebar and rail mounting base has a 1.5” rubber ball and accommodates bars 3/4” to 1” in diameter. Sizing inserts are included to...

RAM X-Grip® Phone Mount with Track Ball™BaseThe RAP-HOL-UN7B-354-TRA1 consists of a Track Ball™ base, composite double socket arm and universal spring-loaded X-Grip® cradle for cell phones. This design features a 1" diameter...

Adapt-A-Post™ 15" Extension PoleVersatility. That one word sums up what you get when you purchase RAM products. For kayaks, versatility is key since space is always at a premium. Whether it's to make some room or put your fishing rod within easy...

RAM® No-Drill™ Vehicle Base for '19 Chevy Silverado 1500 & GMC 1500The RAM® No-Drill™ laptop mounting base features a stabilizer foot and heavy-duty steel base custom-designed to fit the 2019 Chevrolet All-New Silverado and GMC...

RAM Short Double Socket Arm for 1.5" Ball BasesThe RAM-201U-B, SHORT double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket...

RAM Flat Surface Mount® with Long Double Socket Arm & Universal X-Grip® III Holder For Large TabletsThe RAM-B-101-C-UN9U consists of (2 QTY) 2.5" diameter round bases with the universal AMPS hole pattern, LONG double socket arm and universal...

RAM 18" Long Extension Pole with (2 qty) 1" Diameter Ball Ends, and Double Socket ArmThe RAP-BB-230-18-201U consists of a LONG extension pole with (2 qty) 1" diameter ball ends and double socket arm. Dimensions:Overall Length (Arm Socket to Ball End):...

Ram Mixed Combination Pin-Lock™ Security Knob, Stud and Key Knob f/ Gimbal BracketsThe RAM® Gimbal Security Knob is a great solution for securing your gimbal mounted electronics, whether or not it's mounted on a RAM®. The universal design...

RAM® Composite Universal Marine Electronic MountThe RAP-B-111U consists of a 2" x 2.5" rectangle base, STANDARD length double socket arm and 6.25" x 2" rectangle plate. The rectangle base contains pre-drilled holes, including the universal AMPS hole...

Ram Rod 2007 Holder With BaseRAM designs fishing rod holders like nobody else. Take a look at the original RAM ROD series released in the year 2000. This unique concept did a whole lot more that just support a fishing rod. Allowing a quicker response to...

RAM® Tele-Pole™ with 12" & 18" Poles, Double Swing Arms & Round PlateThe RAM-VP-SW1-1218 consists of a 18" lower female Tele-Pole™, 12" upper male Tele-Pole™, double swing arm and 2.5" round base that contains the universal...