Tools
-
Weld Mount
Weld Mount 2.25" Tall Stainless Stud w/#10 x 24 Threads - Qty. 10 [102436]
$62.992.25" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. ...$62.99 -
Weld Mount
Weld Mount AT-300 Adhesive Dispensing Gun f/AT-2010 & AT-4020 [80300]
$85.91$81.99Adhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.$85.91$81.99 -
Weld Mount
Weld Mount AT-850 Square Mixing Tip f/AT-8040 - 4" - Case of 50 [8085050]
$89.96$82.99AT-850 Square Mixing Tip 4" - Case of 50Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.Features:Square Mixing Tip4"...$89.96$82.99 -
CRAFTSMAN
CRAFTSMAN 12-Piece Open End Box End Ratcheting Wrench Set - Metric SAE [99901]
$82.99$73.9912-Piece Open End & Box End Ratcheting Wrench Set - Metric & SAEThis versatile wrench set can be used for various applications. The open-end wrench side allows users to ratchet nuts or bolts on or off without removing the wrench from the...$82.99$73.99 -
Weld Mount
[AT-388]
$118.99$104.99AT-388 Dispensing GunThe AT-388 Adhesive dispensing gun comes with a 10:1 plunger.For Use With 50mL Cartridges of:AT-880Note: The AT-388 will ONLY work with the AT-880 Polypropylene Adhesive Cartridge. The AT-880 is a 10:1 mix ratio with a...$118.99$104.99 -
Panther Products
Panther Portable Rope Cutting Gun [75-7060B]
$64.99Portable Rope Cutting GunPanther’s portable Rope Cutting Gun is ideal for boat, camper and home use. Lightweight (1.5 lbs), the handle fits in the palm of your hand with easy finger pull operation. It makes quick clean cuts in all types of...$64.99 -
Weld Mount
Weld Mount Stainless Steel Stud 1.25" Base 1/4 x 20 Threads 2.25" Tall - 10 Pieces [142036]
$67.99Stainless Steel Stud 1.25" Base 1/4 x 20 Threads 2.25" Tall - 10 PiecesThe stainless steel stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs in shear. All studs have...$67.99 -
Sea-Dog
Sea-Dog Stainless Impeller Puller - Large [660020-1]
$86.95$85.99Stainless Impeller Puller - LargeInvestment Cast 316 Stainless Steel.Dimensions:Width: 3-3/4"Height: 6-3/4"Thread: 7/16"$86.95$85.99 -
Sea-Dog
Sea-Dog Stainless Impeller Puller - Small [660040-1]
$90.95$75.99Stainless Impeller Puller - SmallAllows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump. Available in 2 sizes.$90.95$75.99 -
Weld Mount
Weld Mount Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75 Tall - 6-Pack [142012304]
$73.99Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75" Tall - 6-PackUnlike the SOB standoffs which have a blind thread, the SOT series standoffshave a thread which runs all the way through the barrel of the standoff.This allows the standoff to be...$73.99 -
Weld Mount
Weld Mount AT-301 Adhesive Dispensing Gun w/10:1 Plunger f/AT-6030 Adhesive Only [80301]
$85.91$81.99Adhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive OnlyThe AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our AT-6030 38 ml 10:1 Adhesive Cartridge. This Hand Operated Gun And Our Mixing Tips Provide Precise Mixing...$85.91$81.99 -
Weld Mount
Weld Mount AT-13 - 10:1 Gun Plunger f/AT-6030 Adhesive - 10-Pack [801310]
$102.04$76.9910:1 Gun Plunger for AT-6030 Adhesive10 Pack Gun Plunger for AT-6030 Adhesive$102.04$76.99 -
Weld Mount
Weld Mount Double Poly Clamp f/1/4" x 20 Studs - 3/4" OD - Requires 1.75" Stud - Qty. 25 [80750]
$81.48$78.99Double ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.Features: Hose OD: 0.75" Stud Required:...$81.48$78.99 -
Weld Mount
Weld Mount Double Poly Clamp f/1/4" x 20 Studs - 5/8" OD - Requires 1.5" Stud - Qty. 25 [80625]
$65.99Double ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.Features: Hose OD: 0.625" Stud Required:...$65.99 -
Weld Mount
Weld Mount Double Poly Clamp f/1/4" x 20 Studs - 1/2" OD - Requires 1.5" Stud - Qty. 25 [80500]
$65.99Double ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.Features: Hose OD: 0.5" Stud Required:...$65.99 -
Weld Mount
Weld Mount Stainless Nut Plate w/1/4" x 20 Threads - Qty. 10 [901420]
$83.99Floating Nut PlatesOur floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesive. The fixture keeps the threads clean during bonding...$83.99 -
Weld Mount
Weld Mount Stainless Nut Plate w/#10 x 24 Threads - Qty. 10 [901024]
$77.99Floating Nut PlatesOur floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesive. The fixture keeps the threads clean during bonding...$77.99 -
Weld Mount
Weld Mount AT-7 Aluminum Base Swivel Tie Mount - Qty. 25 [80725]
$78.99$64.99Aluminum Base Wire Tie MountThis tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for...$78.99$64.99 -
Weld Mount
Weld Mount .75" Tall Stainless Standoff Through Thread w/#10 x 24 Threads - Qty. 6 [1024122]
$72.99.75" Tall Stainless Standoff w/#10 x 24 Threads - Through-ThreadUnlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted...$72.99 -
Weld Mount
Weld Mount .75" Tall Stainless Standoff Through Thread w/5/16" x 8 Threads - Qty. 6 [51618122]
$74.99.75" Tall Stainless Standoff w/5/16" x 8 Threads - Through-ThreadUnlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be...$74.99 -
Weld Mount
Weld Mount 1.5" Tall Stainless Stud w/5/16" x 18 Threads - Qty. 5 [51618245]
$73.991.5" Tall Stainless Stud w/5/16" x 18 ThreadThe HS200 stud is designed for heavy load applications such as mounting filters and panels. Thestud is inertial (friction) welded to a 2" base plate creating a very strong part. Manufactured of 304 stainless...$73.99 -
Weld Mount
Weld Mount 2" Tall Stainless Stud w/3/8" x 16 Threads - Qty. 5 [3816325]
$77.992" Tall Stainless Stud w/3/8" x 16 ThreadThe HS200 stud is designed for heavy load applications such as mounting filters and panels. Thestud is inertial (friction) welded to a 2" base plate creating a very strong part. Manufactured of 304 stainless...$77.99 -
Weld Mount
Weld Mount 2.5" Tall Stainless Stud w/1/4" x 20 Threads - Qty.10 [142040]
$71.992.5" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging...$71.99 -
Weld Mount
Weld Mount 2" Tall Stainless Stud w/1/4" x 20 Threads - Qty. 10 [142032]
$66.992" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging panels,...$66.99 -
Weld Mount
Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 100 [805900B]
$68.99Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge...$68.99 -
Weld Mount
Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 100 [805900]
$68.99White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge...$68.99 -
Weld Mount
Weld Mount Square Mixing Tips f/AT-6030,AT-2010,& AT-4020 [8065050]
$86.96$79.99Adhesive Mixing Tip For AT-6030Our AT-650 mixing tip is designed specifically for use with our AT-6030 adhesive. AT-6030 is a 10 to 1 adhesive which requires a mixing tip with more mixing chambers to insure proper mixing before use. These mixing tips...$86.96$79.99