Accessories

1-1/2" Throttle Knob - Red GroovesFeatures:316 Cast Stainless Steel1-1/2" Throttle Control Knobs Fit Morse MY-3, MV-2, Twin and Single Controls with 3/8" -24 ThreadsThrottle Knobs are colored for Sight and Grooved for Feel - Meets ABYC Specifications

Fluorescent Dye Marker - 2-PackPowder that turns snow or water into a bright fluorescent green signal.  You can write in the snow or on the ground.  Serves as an excellent signal for rescuers to mark your location.Features:Environmentally...

Personnel Marker Light (PML)Easily attaches to clothing or a life vest.  Bright green light illuminates for up to 8 hours.  Features:USCG ApprovedPacked in a 4-color heavy duty blister card

Signaling Kit - Flag, Mirror, Dye Marker & WhistleSelection of visual and audible signals that can be seen or heard by sea or air rescues.  Pack in a polybag.  Includes:1 USCG Approved Distress FlagApproved for daytime use only3' x 3' with...

Signaling Mirror with LanyardHigh quality, durable construction, will not corrode due to effects of salt water.Features:View finder and lanyardVisiblity to 10 milesMeasures 3" x 4"WARNING: This product can expose you to chemicals including...

Whistle/Mirror KitAudible and visual signal for dry areas. Help rescuers note there is an emergency and guides them to your location. Audible signal will not freeze. Mirror (2 x 3) with lanyard and view finder. Made of plastic for durability. Help...

101 Electro Steer - Saltwater - No ElectronicsWith the freshwater model’s success, a great product is made better with the introduction of the Electro Steer Saltwater Model. The corrosion-resistant stainless steel frame and saltwater-proof gear...

101 Electro Steer - SaltwaterWith the freshwater model’s success, a great product is made better with the introduction of the Electro Steer Saltwater Model. The corrosion-resistant stainless steel frame and saltwater-proof gear rack offer the...

Inboard HD Flush BuddyEasy to use inboard motor flusher. Great for winterizing, maintenance or anytime you need to run your inboard engine while out of the water. Just connect the garden hose, fit the cup over the water intake and extend the leg sealing...

Outboard Motor SupportEnsure the safety of your outboard motor during trailering and transport with Panther’s Motor Support. Durable, adaptable, and designed for convenience, it’s the go-to solution for boat owners who frequently move their...

T4 Through Tilt Tube Electro Steer - Saltwater - No ElectronicsA unique product to steer a kicker motor. Can be installed on any kicker motor that has a treaded tilt tube. No need to drill holes in your transom. Installs in minutes. 9″ minimum...

T5 Through Tilt Tube Electro Steer - SaltwaterT5 provides a unique solution to steer a kicker motor. Can be installed on kicker motor with threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4 inches between...

Trolling Motor Tie Bar KitExtremely heavy-duty, the Panther Trolling Motor Tie Bar Kit connects an auxiliary trolling motor to a main motor with hydraulic steering. Steer your kicker motor from the helm along with your big motor.The Bar is 36" long with...

Chrome Barrel Bolt - 4"Features:Chrome Plated Bronze Body & High Impact Black Nylon Bulkhead Keeper3/8" Diameter BoltBulkhead Keeper Easily Installs in a 5/8" HoleIncludes Friction Pad to Eliminate Rattle and Provide Smooth Operation Overall...

Chrome Barrel Bolt - 5"Features:Chrome Plated Bronze Body & High Impact Black Nylon Bulkhead Keeper3/8" Diameter BoltBulkhead Keeper Easily Installs in a 5/8" HoleIncludes Friction Pad to Eliminate Rattle and Provide Smooth Operation Overall...

Chrome Plated Brass Round Locker Ventilator - 3-1/4"Features:Chrome Plated Brass or Stainless SteelO.D. Size: 3-1/4"Screw Size: #6 R.H.

Chrome Plated Bronze Cabin Door Hook - 3"Features:Cast BronzeChrome Plated

Fog Bell(0420)Cast BronzeChrome Plated Medium WeightRemovableThis bell has been reviewed by the U.S. Coast Guard and comply with C.G. 169 Regulations for Sound Signal Appliances as required by Annex III Paragraph 2 of the '72 Colregs. This bell is for...

Chrome Plated Zinc Cabin Door Hook - 1-3/4"Features:Chrome Plated Zinc Alloy

Chrome Plated Zinc Cabin Door Hook - 2"Features:Chrome Plated Zinc Alloy

Chrome Plated Zinc Cabin Door Hook - 2-1/4"Features:Chrome Plated Zinc Alloy

Chrome Plated Zinc Cabin Door Hook - 3"Features:Chrome Plated Zinc Alloy

Chrome Plated Zinc Hasp - 3"Features:Chrome Plated Zinc AlloyLength Closed: 3"Width: 1"Padlock Clearance: 1/4"

Cupboard Bolt - 2-1/8" x 1-1/2"Features:Chrome Plated Zinc AlloyBlack Polymer Slide and Knob

Edge Mount Rowlock SocketPlain Plated Zinc AlloyBlack Polymer BearingsFor Use with Fig. 1227, 1262 or 1267 Rowlock HornsScrew Size #10

Eye Strap - 5/16" I.D.Features:Chrome Plated Zinc Alloy

Plastic Deck Plate Key - BlackThe keys for 1" Thru 1-1/2" Deck Plates have a 1" Spade on the handle that allows them to fit many other "Slot" type opening deck plates.Specifications:Length: 3.38"Weight: 27.22 gQuantity: 1Operation Mode: ManualFinish...

Pole Storage Clips - Black - PairFeatures:Soft Black U.V. StabilizedFits 3/4 or 7/8 Inch Diameter TubingAlso Available in Camo Line (Dealer Package Only)Specifications:Pole O.D. Size: 3/4"Dimensions: 3/4" x 2-1/4" x 1-5/8"Screw Size: #10 P.H.

Round Type Rowlock Horns - Plain ZincFeatures:Natrual finish zinc alloyShank O.D.:1/2" (1.3cm)Shank Length: 1-3/4" (4.4cm)I.D. Horns: 2" (5.1cm)

Rowlock Socket - BronzeSpecs: Length: 2-3/8" Width: 7/8" Depth: 1" Screw Size: #10

Side Mount Rowlock SocketsPlain or Chrome Plated Zinc AlloyBlack Polymer BearingsFor Use with Fig. 1227, 1262 or 1267 Rowlock HornsScrew Size #10

Skene Bow ChocksFeatures:Chrome Plated Zinc AlloyPort and Starboard PairMax Rope Size: 1/2"Length Overall: 3-1/2"Width: 7/8"

Spring Clamps 1" - 1-3/4" - PairFeatures:Stainless SteelMinimum I.D.: 1"Max I.D.: 1-3/4"Projection: 2-1/4"Width Clamp: 5/8"

Spring Clamps 5/8" - 1-1/4" - PairFeatures:Stainless SteelMinimum I.D.: 5/8"Max I.D.: 1-1/4"Projection: 1-1/2"Width Clamp: 1/2"

Stainless Steel Boat Hook Holders - PairFeatures:Stainless SteelMax Pole O.D.: 1-1/2"Length: 3-1/2"Width: 1"Screw Size: #6

Thru-Hull Scupper for Mounting Through TransomFeatures:Molded White PolymerSoft Black FlapperNut and Mounting Hardware IncludedSpecifications:Hose Size: 1-1/2"Mounting Hole Diameter: 1-7/8"Max. Hole Thickness: 2-1/8"O.D. Flange: 2-7/8"...

Utility/Wardrobe HookFeatures:Chrome Plated ZincProjection: 1-3/8"Base Width: 1-1/8"

0-Degree Rod Holder Rack for Water Mat *Mat Not IncludedAre you tired of the water mat taking up valuable space on board your boat? We have a cost-effective solution to help you store your water mat away and keep your decks free and open.  This...

15-Degree Rod Holder Rack for Water Mat *Mat Not IncludedAre you tired of the water mat taking up valuable space on board your boat? We have a cost-effective solution to help you store your water mat away and keep your decks free and open.  This...

30-Degree Rod Holder Rack for Water Mat *Mat Not IncludedAre you tired of the water mat taking up valuable space on board your boat? We have a cost-effective solution to help you store your water mat away and keep your decks free and open. This product...