Airmar

ST850 Paddlewheel & Valve KitIncludes: 1 Paddlewheel and Shaft4 O-rings1 Valve Sleeve

B45 Standard Low-Speed Fairing BlockAirmar's Standard Low-Speed Fairing Block for B45. Specifications:Dimensions: 4.25” x 2.37” x 1.87”

Fairing Block for B744VFairings orient the sound beam straight down by mounting the transducer parallel to the water surface.Features:Fairing: High-PerformanceDimensions: 13.6” x 3” x...

Noland RS11 Analog to NMEA 2000 Data ConverterThe RS11 is intended for converting Tach and analog sensor data into NMEA 2000 messages for display by devices such as chart plotter MFDs (Multifunction...

Furuno 33' 10-Pin to 10-Pin Extension CableFeatures:Transducer Extension Cable10-Pin(M) to 10-Pin(F) 33'

Garmin 8-Pin Mix & Match Cable for Low-Frequency CHIRP 1kW TransducersAirmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin.Features:8-PinLow-Frequency CHIRP Cable 

B45 Bronze Thru-Hull with Fairing Block - 50/200 kHz - 600W - 9-Pin Connector (Xsonic)The B45 is Airmar’s smallest and most economical, dual-frequency, bronze, stem transducer. It features a...

DST810 Plastic Smart Sensor 235kHz - NMEA 2000 - BluetoothDepth, Speed-Through-Water, Water Temperature, Boat AttitudeFor a product to be considered a “breakthrough,” it has to vastly...

TM265C-LM-12F Transom Mount Transducer with 12-Pin Connector for Furuno TZT12F, TZT16F & TZT19FRely on Airmar's broadband transducers for the ultimate fishing mission! Whether you're a...

Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element TransducersFor use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts).This product may not be returned to the original...

Navico Mix & Match Cable for Low-Frequency CHIRP Transducers - 9-PinSpecifically for use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000W).

TM185C-M-8G 1kW CHIRP-Ready Transom MountThe TM185M is a transom-mounted, Chirp-ready transducer designed for offshore fishing and freshwater anglers spending their time in shallow to mid-range...

DT812PV-235-N2 - 235kHz - Plastic Thru Hull Smart Sensor - 12° Tilt - NMEA 2000 - 6M CableAirmar has taken its proven Tilted Element™ and broadband technologies and applied them to its...

PM275C-LHW CHIRP TransducerKeel-mount 1kW dual-band CHIRP fishfinder transducer.The PM265 is a Pocket/Keel mount unit available in the Low/Medium and Low/High bands. The PM275 is a wide beam version...

ST800PV-N2 NMEA 2000 Speed & Temp TransducerThe ST800 speed and temperature sensor process digital signals inside the thru-hull housing. Then this Smart™ Sensor sends data to a chart...

Speed & Temp Thru-Hull NMEA2000 - PlasticLow-profile through-hull speed/temp sensor for NMEA 2000 networksThe ST850 is sold with plastic housing only. Bronze and stainless steel housings are...

UDST800P-N2 Ultrasonic Smart Sensor - N2KThe UDST800 just turned your maintenance time into more cruising time…and made your boat smarter too. Ultrasonic speed, depth, and temperature in one...

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m)...

NMEA2000 Cable - 30MWeatherStation cables are available in four versions: NMEA 0183, NMEA 2000, combined NMEA 0183 and 2000, and Furuno NMEA 0183. All cables have a round white connector at one end...

NMEA2000 Cable - 10MWeatherStation cables are available in four versions: NMEA 0183, NMEA 2000, combined NMEA 0183 and 2000, and Furuno NMEA 0183. All cables have a round white connector at one end...

B117 Bronze 0° Depth & Temp with Ray Connector for CP370 & DSM300The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush...

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are...

TM165HW Chirp High Wide 600W Transom Mount Transducer - Requires Adapter CableReplacing a non-Chirp or single frequency transducer with the AIRMAR TM165HW (High Wide) 600W Chirp-ready transom mount...

B175 Bronze Low Frequency 1kW Chirp Transducer 0° Tilt - Requires Mix & Match CableAirmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as...

B285M Single Band CHIRP Thru-Hull Req's Mix & Match CableMedium frequency delivers the right combination of coverage under the boat, extended depth range and the ability to produce clean and...

Raymarine 11-Pin High or Med Mix & Match Transducer CHIRP Cable for CP470 Airmar MMC-11R CHIRP Mix and Match Transducer Cable 1M Raymarine 11-Pin.For use with Airmar's High or Med Single...

TM275C-LHW 1kW Chirp Transom Mount TransducerGet more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency...

SS175L Stainless Steel 20° Thru Hull Mix & MatchRely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter...

P79 NMEA 2000 In-Hull 235 kHzThe P79 in-hull transducer easily adjusts to hull deadrise angles up to 22 °. This ensures that the beam is vertically oriented to receive echos, resulting in...

UST850 Smart Sensor NMEA 2000 - Plastic HousingAIRMAR's UST850 just turned your maintenance time into more cruising time…and made your boat smarter too. Ultrasonic speed and temperature in...

B60-20-FISO 20° Spade Connector for Raymarine ST30, 40, 60, i40, i50 & i60The B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for...

SS175L Stainless Steel 12° Thru Hull Mix & MatchRely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter...

R509C-LHW CHIRP TransducerFeatures:Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)25-Internal, Broadband Ceramic...

R509C-LH CHIRP TransducerFeatures:Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)25-Internal, Broadband Ceramic ElementsBroadband...

TM265C-LH Transom Mount CHIRP - 1kW TransducerTransom-mounted 1kW dual-band CHIRP fishfinder transducer.The TM265 is available in the Low/Medium and Low/High bands. A Low/High widebeam model exists...

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be...

B265LM Bronze Chirp Thru-Hull Transducer 1kW with Fairing Block - Mix & Match Cable NeededThe B265LM Chirp-ready transducer is the perfect mid-range to deep performing transducer in the Airmar...

B175L 20° CHIRP Bronze Thru-Hull 1kW - Needs Mix & Match CableFeatures:Category: ChirpPower: 1kWFunction: Depth,TemperatureFrequency: 40-60 kHzMount Style: Thru-Hull,Flush,TiltedHousing...

Airmar M285 High Wide CHIRP In-Hull Transducer with Humminbird 9-Pin Mix-N-Match CableModel: M285C-HW-HBDepth onlyChirp Ready High frequency (150-250kHz) for great offshore and inshore...

Airmar M285 High Wide CHIRP In-Hull Transducer with Navico 7-Pin Mix-N-Match CableModel: M285C-HW-8GDepth onlyChirp Ready High frequency (150-250kHz) for great offshore and inshore performancePerfect...