Maxwell

Tab WasherMaxwell 4220 Tab Washer

Label 3500Maxwell 3856 Round Label 3500

Gearbox KeyMaxwell Windlass Gearbox Key 31509.53X, 9.53X67 ST ST

Spring Gypsy LiftMaxwell's 2310 Spring Gypsy Lift

Reversing Solenoid Pack - 24VMaxwell Reversing Solenoid Pack 24V, replaces P19046.

Stripper Arm for 1000 & 1500Maxwell Stripper Arm specifically for 1000 and 1500.

PM Solenoid Pack - 12VMaxwell's PM Solenoid Pack that is 12V.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns...

Motor Cima - 1200W - 12V - 4-Hole Flange12V1200W DC3500RPMIP66Diameter: 114 x 181mmThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with...

Motor Cima - 1200W - 24V - 4-Hole Flange24V1200W DC3500RPMIP66Diameter: 114 x 181mmThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with...

Up/Down Windlass Control Panel w/Push Button ON/OFF SwitchEasy to use, panel mounted Up/Down switch for remote windlass operation from the helm, flybridge or cockpit.Suitable for use with...

Anchor Rode - 18'-5/16" Chain to 200'-5/8" Nylon Brait18' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait ropeNylon Brait™ is an 8-strand nylon rope created through braid technology that...

Anchor Rode - 15'-5/16" Chain to 150'-5/8" Nylon Brait15' of 5/16" HT spliced chain to 150' of 5/8" Nylon Brait ropeNylon Brait™ is an 8-strand nylon rope created through braid technology that...

Anchor Rode - 20'-5/16" Chain to 200'-5/8" Nylon Brait20' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope created through braid technology that...

Anchor Rode - 15'-1/4" Chain to 150'-1/2" Nylon Brait15' of 1/4" HT spliced chain to 150' of 1/2" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope...

P10068 Motor - 12VPermanent magnet replacement windlass motorUsed in the Freedom 500, VC500, VW500 and the VWC500 windlassesThis product may not be returned to the original point of purchase. ...

RC8-6 Vertical Windlass 1/4" Chain, Rope 1/2" 12vPackage IncludesWindlassOn/Off Breaker Panel Reversing SolenoidUp/down Panel SwitchEmergency crank / clutch release handleFeaturesSimple two piece...

HRC 10-8 Horizontal Windlass 5/16" Chain, 5/8" Rope, 12V, with CapstanDesigned for boats up to 45 feet, the HRC10-8 Horizontal Series windlasses proudly follow in the highly successful footsteps of...

Anchor Tensioner 7-12mmFeatures:Pulls anchor tight to keep it snug in the bow rollerTakes weight off the windlass and prevent accidental deployment of anchorCam action offers up to 150kg of tension...

Economy Chain Stopper f/5/16", 3/8", 8mm & 10mm ChainChain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to...

Levered Chain Stopper f/3/8" or 10mm ChainChain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent...

Levered Chain Stopper f/5/16" or 8mm ChainChain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent...

Extendable Hinged Bow RollerExtendable Hinged Bow Rollers have a hinged base which allows for shorter or longer overall extension.Extendable Hinged:A - 198mm (7-13/16")B - 125mm (4-15/16")C - 73mm...

Fixed Bow Roller w/LoopMaxwell also featurs a Fixed Bow Roller with an Anchor Loop.Fixed with Loop:A - N/AB - 134mm (5-1/4")C - 75mm (3")D - N/AH - 65mm (2-9/16")H1 - 155mm (6-1/8")L - 460mm...

Fixed Bow Roller - Size 2Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain.Size 2:L - 320mm (12-5/8")B - 86mm (3-7/16")H - 74mm (3")C - 44mm (1-3/4") Quick Guide...

Hinged Bow Roller - Size 2Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain.Size 2:L - 430mm (16-15/16")B - 160mm (5-5/16")H - 100mm (4")h - 190mm (7-1/2")C - 66mm...

Hinged Bow Roller - Size 1Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain.Size 1: L - 320mm (12-5/8")B - 92mm (3-5/8")H - 72mm (2-7/8")h - 133mm (5-1/4")C - 44mm (1-3/4")...

RC12/10 12V WindlassThe RC12 fully automatic windlass series is designed to effortlessly retrieve and deploy 10mm (3/8") short link chain and 16mm (5/8") to 20mm (3/4") three strand or 8-Plait rope...

Up/Down Footswitch - Compact, BlackPart #: P104810Maxwell's compact up and down foot switches are now available in black and white versions. Operates via solenoids thus allowing smaller diameter...

Up/Down Footswitch - Compact, WhitePart #: P104809Maxwell's compact up and down foot switches are available in black and white versions. Operates via solenoids thus allowing smaller diameter wiring...

EMERGENCY CRANK HANDLE (RC8, RC10, RC12 SERIES)For use with RC8, RC10, RC12 & Freedom Series anchor winches. Constructed of light weight, durable injection-moulded plastic, these handles float if...

MAXWELL AA710WIRELESS, HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTERAll the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash.High level wireless...

ANCHOR SWIVEL SHACKLESThe use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker...

ANCHOR SWIVEL SHACKLESThe use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker...

HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/8" RopeMaxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully...

The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original...

The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original...

Maximum Pull: 1320lbsThe larger RC8-8 can be used with 8mm (5/16") chain spliced to 14mm (9/16") three strand or 8-plait rope.The ingeniously designed rope/chain gypsy (chainwheel) is able to...

The RC6 utilizes 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-plait rope. Maximum Pull: 660lbs. Providing most of the features of the larger RC8, the RC6 has been designed with the...

Stripper Arm Kit For Freedom 800Trouble free transition from rope to chain by means of an innovative pressure arm system within a safer enclosed design.

Stripper Arm Kit For Freedom 500Trouble free transition from rope to chain by means of an innovative pressure arm system within a safer enclosed design.