Seaview

Retrofit Cable Seal - Grey - Up to 0.39" (10mm) Diameter CableThe Seaview Retrofit Cable Seal is the only guaranteed and proven watertight installation for your currently installed cables! The...

Top Plate for FLIR M100 & M200This Seaview top plate is for FLIR M100 or M200 thermal cameras. This one piece design gives the top plate a nice clean look, and is made from King Starboard...

Mast Mount f/KVH TV1Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the...

4° Wedge for 10x10 BaseThis Seaview Base Wedge angles your radar down 4 degrees allowing your radar to be level when the boats bow is up. Will fit all Seaview mounts with a...

Mast Platform for KVH M7/TV6 & Intellian i6/D6Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used...

Mast Mount for FLIR Thermal Camera & Raymarine M-SeriesAchieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now...

SS 1-14 Threaded Insert f/Spreader Kits Recommended f/4' & Taller AntennasThe stainless steel 1-14 threaded insert is for Seaview Spreader Kits. Replaces the factory plastic 1-14 threaded insert if...

3" Low Profile Satdome Mount f/KVH M1/M1DX/TV1, Intellian i1 & i2, Raymarine 33STVSeaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting...

5" Stainless Steel Power Mount - 7" x 7" Base - f/Garmin/Raymarine 3G/4G RadarIncludes ADA-R1 modular top plate.Seaview Stainless Steel Radar Mounts are 5" tall and aft leaning. The 7"...

1.5" Thermal Camera Top Down Riser Mounts Vertical or Upside Down for FLIR MD-Series & Raymarine T-200Ever wanted to hand your FLIR M-Series or Raymarine T-Series upside down? Well now you can...

RM-GOL-1 Rail Mount for Golight/SearchlightsMount that Golight or any other search light of yours onto your rail with a Seaview Search Light Rail Mount! The mounting plate is made from a machined...

Modular Dual MountThe 28" tall Seaview Dual Mount is pre-drilled for up to 4.5' Open Array Radar. The top is for Satellite domes. This Dual Mount is for Open Array Radars & Satdomes or Cameras. ...

8' Radar Mast Pole Kit with 2 Strut KitsSeaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3"...

8' Pole KitSeaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable...

8' Pole KitSeaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable...

SM-18-ASeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast...

Floodlight Kit for 1-1/4" Lightbars - Includes LED Light and HardwareFits all Seaview Modular Light Bars 1-1/4" in diameter.Includes1-1/4" stainless steel clampMounting hardwareHella 0670 Sea Hawk...

Modular Plate for All FB150 and FB250 DomesSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar...

Modular Plate for 24" JRC/Lowrance/Northstar/Simrad DX64S DomesSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look...

22.5" Dual Mount for Up To 4.5' Open Array Radar - Top for Sat Domes - Top Plate Required Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount...

36" Modular Mount AFT Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories...

24" Modular Mount AFT Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories...

Triple Mount Adapter for GPS, Light and VHFLight bar adapter to mount a light and 2 GPS units. (Light and electronics not included) Specifications:Type: Triple MountsBox Dimensions: 4"H x...

Universal 24" Radar Mast PlatformSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast...

Polished Stainless Steel Cable Seal - Multi Cables (up to 2-17mm Each)The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made...

Grey ABS Plastic Cable Seal - UV Stable - Multi Cables (up to 2-17mm Each)The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are...

Polished Stainless Steel Cable Seal - 2 Cables (2-15mm Each)The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very...

Grey ABS Plastic Cable Seal - UV Stable - 2 Cables (2-15mm Each)The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of...

Polished Stainless Steel Cable Seal - 1 Cable (2-10mm)The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong...

Grey ABS Plastic Cable Seal - UV Stable - 1 Cable (2-10mm)The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very...

Direct Mount 4° Wedge f/Simrad HALO™ Open Array RadarImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal...

Adapter Plate for Simrad HALO™ Open Array Radar Use for Modular Mounts - ADA-R1 RequiredThe Seaview Top Plates are made from a pre-drilled plate that has been incased in a UV resistant ABS...

Direct Mount Adapter Plate for Simrad HALO™ Open Array RadarSeaview's Simrad HALO™ adapter plate is a great solution when replacing an existing Simrad Broadband 3G™, Broadband...

SP5S1 - Uncut Rail PodMax Useable Face: (14.75" x 5")Max Cut Out Area: (13.875" x 4.125")Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your...

SP3S1 - Uncut Rail PodMax Useable Face: (13.75" x 9")Max Cut Out Area: (12.938" x 8.125")Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your...

SP2S1 - Uncut Rail PodMax Useable Face: (11.75" x 7")Max Cut Out Area: (11" x 6.125")Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your...

Seaview Stainless Steel Guard for 20" to 24" Radar DomesProtect your radome from damage and reduce wear and tear on the sails with Seaview Mast Mount Guards. Manufactured from marine grade 316...

Seaview Stainless Steel Guard for 12-20" Radar DomesProtect your radome from damage and reduce wear and tear on the sails with Seaview Mast Mount Guards. Manufactured from marine grade 316 stainless...

Add-On Instrument Pod - UncutMax Usable Face: 4.625" x 4.625"Max Cut Out Area: 4.125" x 4.125"This Seaview Accessory Pod can be mounted to Seaview Sail Pods, Deck Pods or Rail Pods. These Accessory...

Seaview DPOD Deck Power Pod BoxMax Usable Face: 14.75" x 5"Max Cut Out Area: 13.875" x 4.125" The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount...