Marine Hardware

Magazine/Utility Rack9-1/2"H x 9-3/4"W x 4-1/8"DWall-mount or free-standingUse to store plates, magazines, navigation books or charts

Medicine Chest11"W x 15"H x 4-1/2"DCan mount to open left or rightAdjustable shelves

Solid Teak Pedestal Table TopsRectangle - 16" x 28" x 1-1/8" ThickSolid teak table tops with finished, raised lip edgeMounts to standard pedestal table hardwareGreat lightweight, durable, portable tableUser can add 3-7/8" diameter drinkholder cutouts

Teak Swim Platform with 2-Step Telescoping Ladder for Boats with Outboard MotorsFeatures:304 S.S. HardwarePlatform Dimensions: 18"W (back) 17"W (front) x 15"D x 1-5/16" thickIncludes Mounting HardwareAssembly required

Teak Swim Platform with 3-Step Telescoping Ladder for Boats with Outboard MotorsFeatures:304 S.S. HardwarePlatform Dimensions: 18"W (back) 17"W (front) x 15"D x 1-5/16" thickIncludes Mounting HardwareAssembly required

2.2lb Bruce AnchorCoastal anchoring can be tough with anything other than the YakGear 2.2lb (1kg) Bruce Anchor. This 2.2-pound (1kg) galvanized steel plow anchor is the preferred anchor choice for coastal and near-shore fishermen.The plow-shaped design...

T-Handle Latch with Keeper - Pull Draw Front Mount Black Flexible RubberLarge Size (70 Series) is 221mm (8.70") when latchedThese flexible handle latches adapt well to alignment irregularities in field use. But no matter how they are mounted or latched,...

6" Fold-Down Dock CleatLow-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off.Features:Ideal for small boats and watercraftLow-profile, fold-down design keeps cleat clear of dock trafficMarine-grade aluminum...

8" Fold-Down Dock CleatLow-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off.Features:Ideal for small boats and watercraftLow-profile, fold-down design keeps cleat clear of dock trafficMarine-grade aluminum...

Anchor BuoyAttwood's Anchor Buoy is constructed using premium marine grade vinyl construction for superior durability. The buoys are soft and pliable to prevent scratching and have built in UV inhibitors to guard against discoloration of the high...

90° P-Trap Fuel Tank Vent -  Black with Black Vent HeadThis Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns...

90° P-Trap Fuel Tank Vent - Black with Stainless Steel Trim CoverComposite 90-degree P-trap fuel tank vent 66419-3. These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns...

90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent HeadThis Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions...

Anchor Lift SystemThis convenient system drops the anchor at the turn of a button and stores it in the anchor mount housing when not in use. Constructed of heavy gauge steel with durable powder coated finish and mounts on the bow or stern corners of...

Anchor Ring & RopeAssists in anchor retrieval. Designed to lift anchor systems up to 80lbs where 10' or more of anchor chain is used. Lifting capacity based on anchor buoy size. *Buoy sold separately.

Braided Nylon Rope - 3/16" x 100' - WhiteThe strongest rope manufactured, nylon can absorb sudden shock loads that would break ropes of other fibers.This ability allows this product to be widely used in the marine industry for both anchor lines and dock...

Cowl VentilatorAttwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised water barrier. Plastic vents are...

Deck Fill for Carbon Canister System - Angled Body & Scalloped Black Plastic CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure...

Deck Fill for Carbon Canister System - Angled Body & Scalloped Chrome CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief...

Deck Fill for Carbon Canister System - Angled Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure...

Deck Fill for Carbon Canister System - Straight Body & Scalloped Chrome CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief...

Deck Fill for Carbon Canister System - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure...

Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Black Plastic CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure...

Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure...

Deck Fill for Pressure Relief Systems - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure...

Deck Fill Replacement Cap & ChainThis Attwood Replacement Cap and Chain is made for Attwood deck fills. The flush cap is slotted for a separate key and features an O-ring that seals the cap watertight. Features:Cap is attached by a stainless...

Deck Fills for Pressure Relief Systems - Straight Body - Scalloped Black Plastic CapAttwood's Pressure Relief Systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The...

Deluxe Lift 'N Lock Anchor ControlDeluxe anchor lifts are for small to medium size open boats. It incorporates the pull-up lock and release mechanism making setting or recovering the anchor easier. Will support up to a 20-pound anchor when using a...

Fender Cleat - 3-1/2"The perfect compliment to the Attwood Neat Cleat, the Fender Cleat allows you to easily secure fenders to your boat with a simple lift. This retractable cleat is made of durable, enhanced cast 316 stainless steel it's simple design...

Flush Hatch PullThe new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments, and hatches. Handle is easy to grip, even with gloved hands. Durable ABS construction with black textured finish.

Gasoline Deck Fill - 1-1/2 inch Stainless Steel AlloyFor 1-1/2 (inch) inner diameter hose. This deck fill is imprinted and color-coded to specify GASOLINE. The flush cap is slotted for a separate key and features an O-ring that seals the cap watertight...

Launch Line 5/16" x 30'Helps assist or steer your boat when launching or loading.Features:Solid braid MFP line includes spring hook and handy foam gripEasy to handle floatable line that dries quicklyUV ResistantSpecifications:Thickness (inch):...

Mooring Fender Lock Kit - Stainless Steel PairStainless Steel Fender Lock Kit 11575-3 makes hanging or moving fenders quick and easy. The two-part kit is easy to install with stainless steel screws or bolts (not included). Tie fenders to the key part of...

Mooring Snubber Kit with 3/8" x 20' Dock LineThis flexible snubber stretches to absorb shock and protect boats, cleats, and lines from the strain of wind and water. The resilience of the snubber can be adjusted to conditions by increasing or decreasing...

Neat Cleat Stainless Steel - 6"A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8 in. stainless steel rod. Drainage receptacles (included) capture moisture and send it to...

Rope WrapsWrap around and hold your ropes, cords, hoses, and more.Features:Color: yellow & black Includes:Three (3) 1 inch x 12 inch straps, with sewn in hook-and-loop fasteners Quick Guide (pdf)

Soft Grip 13" Steering WheelThis is the ideal steering wheel for bass boats, sport boats, and runabouts. The steering wheel has a patented design that provides a comfortable and firm grip. Also, this steering wheel has contemporary styling with a soft,...

Springlift Black Composite - 10mm Socket - Extended 26.9" - Compressed 15.2"Attwood is partnered with Stabilus®, the world’s leading supplier of gas springs and related products with over 100,000,000 units in the field. All Attwood springs are...

Stainless Gas Spring - 10" - 10mm SocketPopular replacement gas springs for the aftermarket. The pressure tube and rod are made of a stainless steel alloy, while all other exposed components are stainless steel or marine-grade composite...

Stainless Gas Spring - 12" - 10mm SocketAll series 34 are 20" long expanded and 12" long closed. They have 3/8" ball socket type ends with a rod diameter of 5/16" and a cylinder diameter of 3/4".Stainless Steel shell and rod ensure corrosion-resistance...