Marine Hardware

Quick Radio Remote Control Receiver 913MhzFeaturesNumber of relays - 2Full power range (from 10.5 to 31Vdc).Relay current carring capacity - 15 APower absorption in stand-by mode - 25...

Quick Radio Remote Control Receiver 913MhzFeaturesNumber of relays - 4Full power range (from 10.5 to 31Vdc)Relay current carrying capacity - 15 APower absorption in stand-by mode - 25...

SH10 Anchor Bullet Swivel - 10mm Stainless Steel Bullet Swivel -f/11-44lb. AnchorsA swivel or shackle between the anchor and rode is necessary for the anchor to enter the bow roller properly and for...

SH8 Anchor Bullet Swivel - 8mm Stainless Steel Bullet Swivel -f/11-44lb. AnchorsA swivel or shackle between the anchor and rode is necessary for the anchor to enter the bow roller properly and for...

SW10 Anchor Swivel - 10mm Stainless Steel Jaw Jaw Swivel - f/16-44lb. AnchorsStainless Steel Jaw Jaw Swivel

SW8 Anchor Swivel - 8mm Stainless Steel Jaw Jaw Swivel - f/11-16lb. AnchorsStainless Steel Jaw Jaw Swivel

WCS830 Windlass Control SwitchWindlass control board (UP/DOWN)Electric device enabling windlass even in the rudder area. IP67 front seal.

Flexible Shaft Coupling for 5" B/W, Hurth, & Volvo - 25HP/100RPM CapacityThe R & D Marine Flexible Coupling consists of a flexible disc molded with a polyester elastomer. The disc gives clearance...

Split Half Coupling for Volvo - .75"The R & D Marine Steel Clamp Half Coupling has a 4" diameter flange size. Steel Clamp Half Couplings can accommodate the variations that occur with normal shaft...

Engine Mount Kit - 4 Engine Mounts f/Small Yanmar Engines (Yanmar*)* Suitable for the Yanmar 1GM, 2GM, 3GM, 3YM, 3HM and 3JH series enginesThe R & D Marine Engine Mounts are designed specifically...

Engine Mount w/4" Footprint - 12mm Stud - 30-90lbs Capacity Per MountThe R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to...

Engine Mount w/4" Footprint - 3/4" Stud - 250-563lbs Capacity Per MountThe R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to...

Engine Mount w/4" Footprint - 5/8" Stud - 120-410lbs Capacity Per MountThe R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to...

Engine Mount w/4" Footprint - 5/8" Stud - 300-680lbs Capacity Per MountThe R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to...

Engine Mount w/4" Footprint - 5/8" Stud - 300lbs Capacity Per MountThe R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to...

Engine Mount w/4" Footprint - 5/8" Stud - 50-175lbs Capacity Per MountThe R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to...

Engine Mount w/4" Footprint - 5/8" Stud - 70-201lbs Capacity Per MountThe R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to...

Engine Mount w/4" Footprint - 5/8" Stud - 80-230lbs Capacity Per MountThe R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to...

Engine Mount w/6.85" Footprint - 5/8" Stud - 120-410lbs Capacity Per Mount*** Designed as a rear mount for the Yanmar 4JH series engineThe R & D Marine Engine Mounts are designed specifically for...

Engine Mount w/6.85" Footprint - 5/8" Stud - 50-75lbs Capacity Per Mount*Suitable for the Yanmar 1GM, 2GM, 3GM, 3YM, 3HM and 3JH series enginesThe R & D Marine Engine Mounts are designed...

Engine Mount w/6.85" Footprint - 5/8" Stud - 80-230lbs Capacity Per Mount** Designed as a front mount for the Yanmar 4JH series engineThe R & D Marine Engine Mounts are designed specifically for the...

Flexible Shaft Coupling for 4" B/W, Hurth - 8HP/100RPM CapacityThe R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The...

Flexible Shaft Coupling for 5" B/W, Hurth - 13HP/100RPM CapacityThe R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The...

Flexible Shaft Coupling for 5" B/W, Hurth - 20HP/100RPM CapacityThe R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The...

Flexible Shaft Coupling for 5" B/W, Hurth - 8HP/100RPM CapacityThe R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The...

Flexible Shaft Coupling for 5" Yanmar - 10HP/100RPM CapacityThe R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The...

Flexible Shaft Coupling for 6" Twin Disc - 28HP/100RPM CapacityThe R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The...

Flexible Shaft Coupling for 4" B/W, Hurth - 3HP/100RPM CapacityThe R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The...

Power/Data/Video Cable - 1MPower/Data/Video Cable for the Raymarine e Series and gS Series Models below.Features:Cable: StraightPower/NMEA 0183/VideoCompatible...

Combo Fender/Rope Wrap with CarabinerThis combo combines the best of both worlds. The fender wrap allows you to attach to almost any object. the carabiner rope wrap allows for quick and easy...

Dock Saver Dock Tie-DownThe Dock Strap Tie-Down is simple, quick and easy. Simply place the loops over the dock and boat cleats, quickly tighten the slack with the thumb lever cam buckle and you are...

Fender WrapNo more knots - tying or untying fenders - simply tie the fenders off one time for your boat and your done. Attach or Detach fenders in a matter of seconds. Fast and easy hook & loop make...

Rope Wrap - 10"Keep your ski/tube/wakeboard ropes tangle free for quick and easy unwinding and retrieval. Store multiple ropes in the boat without ever having to worry about tangled ropes again...

Rope Wrap - 16"Keep your ski/tube/wakeboard ropes tangle free for quick and easy unwinding and retrieval. Store multiple ropes in the boat without ever having to worry about tangled ropes again...

3/4" x 12" Threaded Aluminum Pipe12" length of threaded, bright anodized, 3/4" aluminum pipe for antenna standoff. Threaded all the way through with 7/8-14 thread so it can be cut to length...

Lay Down HookFolding hooks of forged aluminum for securing Rupp Sidekicks, Standard outrigger bases or marine antennas in the lay-down position. Folds out of the way when not in use.Sold...

Threaded Upper Antenna Support AssemblyIncludes forged aluminum "yoke' with 7/8-14 thread (09-1260-23),  2-piece Antenna collar (09-1258-2PC) for 1.5" OD ANTENNAS and black anodized Jam nut...

Roam Series City Water InletThe Roam Series City Water Inlet delivers fresh water on demand, making it the ideal solution for hassle-free stops at campsites with mains water. Waterproof rated to...

Roam Series Gravity Fill Water InletThe Roam Series Gravity Fill Water Inlet keeps your RV adventure-ready with rugged, waterproof protection (IP68/IP69K rated), perfect for regular water refills on...

Roam Series Quick Connect Hot/Cold Water OutletThe Roam Series Quick Connect Hot/Cold Water Outlet is perfect for grabbing a hot shower, rinsing off gear, surfboards, pets, and more! Adding real...