Marine Instruments

B45 Bronze Thru-Hull with Fairing Block - 50/200 kHz - 600W - 9-Pin Connector (xSonic)The B45 is Airmar’s smallest and most economical, dual-frequency, bronze, stem transducer. It features a single, 50/200 kHz ceramic element. The included fairing...

B45 Standard Low-Speed Fairing BlockAirmar's Standard Low-Speed Fairing Block for B45. Specifications:Dimensions: 4.25” x 2.37” x 1.87”This product may not be returned to the original point of purchase. Please contact the...

B60 20° Bronze Thru-Hull Mix & Match Cable NeededThe B60 is a 600 W, 50/200 kHz transducer that integrates Airmar’s popular, Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at either a 20° or...

B60 Thru-Hull Transducer 20° Tilt 9-Pin for Navico xSonicThe B60 is a 600W, 50/200 kHz transducer that integrates Airmar’s popular, Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at a 20° angle...

B60-20-FISO 20° Spade Connector for Raymarine ST30, 40, 60, i40, i50 & i60The B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in, deadrise compensation. The resulting vertical...

B75HW High Wide Tilted Element Chirp Transducer - 12 Degree Deadrise, 600W Thru HullRequires Mix and Match Cable for the appropriate Fishfinder it will be connected to.Airmar’s low-profile Chirp-ready transducer models are the perfect addition to...

B75HW High Wide Tilted Element Chirp Transducer - 20 Degree Deadrise, 600W Thru HullRequires Mix and Match Cable for the appropriate Fishfinder it will be connected to.Airmar’s low-profile Chirp-ready transducer models are the perfect addition to...

B785C-M CHIRP Bronze Thru-Hull w/Fairing Block - 600WFeatures:Thru-hull bronze model with fairingSame physical size as a B744V 600W power ratingDepth and fast-response water temperature sensorAvailable only in the Medium frequency band (M :...

Chirp Junction Box for Raymarine CP470 Type ConnectorAirmar adapter box for single-band or dual-band CHIRP tranducers, with Raymarine 11-pin connector.This product may not be returned to the original point of purchase. Please contact the manufacturer...

CM599C-LHW Chirp Wide Broadband - No Connector - Bare WiresFeatures:Pocket/Keel mount wide-beam model with 3000W power ratingDepth and fast-response water temperature sensorWide-beam model with 25° constant beamwidth in High band and 9°-23°...

CM599LH 1-3kW Pocket Mounted Transducer - No ConnectorHaving the right tool for the job makes the job easier and gives better results. The right tool for covering deep-water haunts of swordfish, tuna, and other species is a 2 to 3 kW, low and...

DST800 Nylon Thru-Hull N2K NMEA2000The DST800 is a Smart™ TRIDUCER® Multisensor that offers the depth, speed, and temperature functions in one compact thru-hull fitting. The low-profile, retractable sensor computes accurate depth, speed, and...

DST800L-235-N2 235kHz Bronze Thru-Hull - Long Stem - NMEA 2000The DST800 is a Smart Triducer multi-sensor that offers depth, speed, and temperature functions in one compact thru-hull fitting. Digital signal processing inside the housing provides depth,...

Airmar DT812BV-235-N2 235 kHz Low Profile Tilted Element™ Smart™ Sensor 12° Tilt Bronze NMEA 2000Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The...

DT812PV-235-N2 - 235kHz - Plastic Thru Hull Smart Sensor - 12° Tilt - NMEA 2000 - 6M CableAirmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a...

DX900+ Multilog Smart™ Electromagnetic Speed Sensor Thru‑Hull NMEA 0183Say goodbye to the paddlewheel and hello to Smart® Sensor technology. The DX900+ uses electromagnetic technology to accurately measure dual-axis speed...

Fairing Block for B122 & DST-800LA replacement high-speed fairing block for the B122. This fairing can also be used for the DST800L.Dimensions: 13.5" L x 2.94" W x 2.96" T.This product may not be returned to the original point of purchase. Please...

Fairing Block for B744VFairings orient the sound beam straight down by mounting the transducer parallel to the water surface.Features:Fairing: High-PerformanceDimensions: 13.6” x 3” x 3” This product may not be returned to the original...

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail...

Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element TransducersFor use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts).This product may not be returned to the original point of purchase. Please contact the manufacturer...

Furuno 33' 10-Pin to 10-Pin Extension CableFeatures:Transducer Extension Cable10-Pin(M) to 10-Pin(F) 33'This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Garmin 8-Pin Mix & Match Cable for Low-Frequency CHIRP 1kW TransducersAirmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin.Features:8-PinLow-Frequency CHIRP Cable This product may not be returned to the original point of purchase...

Humminbird 14-Pin Mix & Match Chirp Cable - 1MAirmar's 14-Pin Mix & Match Chirp Cable for HumminbirdFeatures:Length: 1M14-PinSpecifically for HumminbirdThis product may not be returned to the original point of purchase. Please contact the...

In-Hull TankThe tank is cut to the boat’s deadrise angle to ensure that the transducer is properly oriented for optimal performance.Features:2KW/3KW in-hull tank onlyFits: R199, R299, R399, R111, R599C Innovative tank design allows for bow-stern...

Mix & Match Cable for Raymarine 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail...

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.The short pigtail attached...

MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail...

Navico 7-Pin Blue Mix & Match Chirp Cable - 1MAirmar's Mix & Match Chirp Cable for Navico.Features:Length: 1M7-PinColor: BlueThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any...

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix and Match models. These versions have...

Navico Mix & Match Cable for Low-Frequency CHIRP Transducers - 9-PinSpecifically for use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000W).This product may not be returned to the original point of purchase. Please contact the...

PM111 LHW CHIRP 2kW Wide-Beam Chirp-Ready Pocket/Keel Mount - No ConnectorGet more coverage under your boat with Airmar’s unique wide-beam, high-frequency, Chirp-ready transducer. The high band operates across a frequency range of 150 to 250 kHz...

PM111LH Pocket Mount - Low-High Chirp 2kW - No ConnectorA popular choice for boat builders, pocket mount transducers is installed within a small custom pocket in your vessel’s hull or keel, flush to the surface. Though retrofit installation is...

PM275C-LHW CHIRP TransducerKeel-mount 1kW dual-band CHIRP fishfinder transducer.The PM265 is a Pocket/Keel mount unit available in the Low/Medium and Low/High bands. The PM275 is a wide beam version of the PM265 with Low/High bands and a wide beam...

PM411C-LWM Ultra Wide Pocket Mount 2kW Transducer - Low-Med - Depth/Temp - No ConnectorToday’s top billfish-tournament captains are calling Airmar’s PM411LWM their “go-to” transducer for seeking out targets and pinpointing them...

R109C-LH 2kW Thru-Hull TransducerCHIRP transducers enable bottom detection down to 3,000M (10,000') with 5 to 10 times greater detail and resolution so precise it's possible to distinguish between individual baitfish, game fish, and underwater...

R109LHW Low High Wide Chirp Thru-Hull Transducer with Fairing Block - No ConnectorGet more coverage under the boat with Airmar’s unique wide-beam, low- and high-frequency, Chirp-ready R109LHW. The high band operates across a frequency range of 150...

R111-LH Chirp In-Hull Transducer - Bare WireRely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp...

R409C-LWM Wide-Beam Chrip Transducer - Low/Wide/Medium - Bare WireOutfish the competition with AIRMAR’s new tournament series Ultra Wide BeamChirp transducers. Now, get even MORE coverage under the boat. These Ultra Wide transducers offer a...

R509C-LH CHIRP TransducerFeatures:Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)25-Internal, Broadband Ceramic ElementsBroadband / CHIRP / Spread SpectrumOperating...

R509C-LHW CHIRP TransducerFeatures:Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)25-Internal, Broadband Ceramic ElementsBroadband / CHIRP / Spread SpectrumOperating...