Rigging

Genoa Car - Fits 20mm (3/4") T TrackFeatures a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knobA popular range of Genoa cars and sliders designed to run on a 20mm (3/4") 'T'...

Genoa Car - Fits 25mm (1") T TrackFeatures a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knobA popular range of Genoa cars and sliders designed to run on a 25mm (1") 'T'...

Genoa Car - Fits 32mm (1-1/4") T TrackFeature precision turned Ertalyte sheaves running on a large diameter center bearing, for friction-free performance under load. Sheaves are designed with extra width to accept two sheets. The sheave axle is...

Genoa Slide with Loop for 32mm TrackHave a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks. A popular range of Genoa cars and sliders designed to run on a 32mm (11/4")...

High Load Eye 16mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing...

High Load Eye 22mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing...

Manta/Odyssey Land Sailing Mainsheet Block Kit - 2:1Upgrade or replace your current Mainsheet line hardware with the Barton class-approved Manta/Odyssey Land Sailing Mainsheet Block Kit. Creates a 2:1 mechanical advantage on the mainsheet line. Complete...

Size 3 Vang SystemFeatures:Snap Shackle Head24' Line

Size 5 Vang Tackle 4:1Upgrade your existing Vang system or use it as a boom preventer.  Snap shackle fixings allow for quick and easy deployment.  Professionally spliced and assembled. Compatible With:Boats up to 35' (10.7 M)Technical...

Slab Reefing KitSupplied with sliding blocks which are held in place with spring-loaded plungers. Manufactured from stainless steel and 'Spectro' anodised aluminium.Complete with sufficient length of 'T' Track and end stops.Supplied with 60cm of 25mm...

Small Furling Drum - 2.99"Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.Features:Holds up to 4.3M of LineSpecifications:Drum Diameter:...

Stanchion BullseyeBarton's Stanchion Mount Bullseye is ideal for use with furling lines in place of a block. The simple-to-fit mount features a large nylon bullseye with a 17 mm opening.

Towable Genoa Car - Fits 25mm(1") T-TrackTowable genoa carsWith tow eye or sheave in place of plunger, allowing a control line to be lead aft so that genoa car adjustments can be made from the cockpit. Use in conjunction with end fittings shown...

Size 2 4:1 Vang System, Swivel HeadUpgrade your existing Vang system or use it as a boom preventer. Snap shackle fixings allow for quick and easy deployment. Professionally spliced and assembled. These can be used as Handy Billies.Features:For Boats up...

Spinnaker Pole Slide Car (32mm)Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends.Plain bearing genoa cars, sliders, and spinnaker pole slides,...

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Add-A-CleatA versatile cleat easily mounts to a stanchion or rail 7/8" and 1" diameter ( will accommodate larger sizes with longer clamp). Construction consists of a husky Stainless Steel bracket and clamp with a 4-1/2" nylon coated aluminum cleat. Use...

Adjuster with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and...

C-12 Cutter to 3/8" - FelcoC. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns...

Cable Cutter to 1/4" - FelcoC. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns...

Closed Body Jaw to Swage Tubular Turnbuckle for 1/8" WireJaw to swage- Check Nut Locking.Specifications:1/8" Wire1/4" Pin3" adj.

Closed Body Jaw to Swage Tubular Turnbuckle for 3/16" WireJaw to swage- Check Nut Locking.Specifications:3/16" Wire1/4" Pin3" adj.

Deck Terminal with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light...

Deck Toggle Turnbuckle to Hand Crimp Terminal for 1/8" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications:1/8" Wire1/4"-283" adj.

Deck Toggle Turnbuckle to Hand Crimp Terminal for 3/16" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications:3/16" Wire1/4"-283" adj.

Double Jaw Rigging Toggle - 1/4" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions...

Double Jaw Rigging Toggle - 3/8" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions...

Double Jaw Rigging Toggle - 5/16" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions...

Double Threaded Interlocking Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1". 

Gate Eye to Splice Eye Fitting*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light...

Handy Lock Turnbuckle Jaw/JawThe 01 Series Handy Lock turnbuckle is one of our oldest products and still stands the test of time. Neat and compact and positively locked without cotter pins or check nuts, the Handy Lock has all the features needed for...

Interlocking Swivel Gate Eye for 1/8" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

Interlocking Swivel Gate Eye for 3/16" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

Jaw/Jaw Open Body Turnbuckle - 1/2-20 ThreadFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.Forged silicon bronze bodies with 316...