Rod Holders

Round Head Closed Base Rod Holder - 15° - 9"Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT pipe to hose fitting.Head Size: 3.85"Length: 9"Angle: 15° HeadInner Diameter: 1-5/8" Specifications:Angle: 15...

Round Head Closed Base Rod Holder - 30° - 9"Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT pipe to hose fitting.Head Size: 3.85"Length: 9"Angle: 30° HeadInner Diameter: 1-5/8" Specifications:Angle: 30...

Stainless Steel Rod RiggerAllows for your rods to give you a better fishing spread.

Straight Side Mount Transom Rod or Console Rod Holder 8-1/2"Features:4 hole 3" x 4-1/2" brushed padConstructed of cold drawn anodized aluminumWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to...

Triple Aluminum Kite Rod Holder - Bent Butt - BrushedFeatures:Rod holder is used for 1 kite rod and 2 additional rods to increase your rod storage capacity and keep them up and out of the wayConstructed of cold drawn anodized aluminumTube ID 1-5/8" Base...

Triple Aluminum Kite Rod Holder - Bent Butt - PolishedFeatures:Rod holder is used for 1 kite rod and 2 additional rods to increase your rod storage capacity and keep them up and out of the wayConstructed of cold drawn anodized aluminumTube ID 1-5/8"...

Weld On Aluminum Flared Rod Holder with Blade 10"Specifications:Length: 10"ID: 1-7/8"WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm...

Weld On Aluminum Flared Rod Holder with Blade Mill Finished 10"Specifications: Length: 10"ID: 1-7/8"WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other...

Weld On Aluminum Flared Rod Holder without Blade 10" Specifications:Length: 10"ID: 1-7/8"WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive...

Weld On Aluminum Flared Rod Holder without Blade Mill Finished 10" Specifications:Length: 10"ID: 1-7/8"WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or...

BOOMSTICK Part #: 121Designed to put as many as 3 lines either port or starboard, PLUS another line from the stern.

Boomstick JrDesigned to put as many as 2 lines either port or starboard, PLUS another line from the stern

Double Rod Holder Part #: 105 The double rod holder, with its bent butt and angled rod holders, plus solid weld contruction from 60 series aluminum, gives the fisherman the opportunity to fish two lines from one holder.

Single Rod Rigger Part #: 102Our single rod rigger with its machined slots and welded construction offers an affordable side rigger to all fisherman. Constructed from high quality 60 series aluminum and welded gimbal pin, our rod rigger gives the...

Universal Truck Rod RackFeatures: Adjusts from 53.5"-67.5" Adjustable angle 6 Rod Holders Drill bit and SS Hardware included

30° Flush Mount Rod Holder - 304 Stainless Steel - 9-1/4"Features:Length: 9-1/4"Flange: 3-3/8" x 4-1/4"Tube Inner Diameter: 1-5/8"Fastener: 5/16"(3)Material: 304 Stainless Steel Specifications:Angle: 30 DegreesConstruction: Stainless SteelDiameter...

Description: 304 S.S. 4-Tube Rocket Launcher. Overall Length: 34" Tube Length: 10" Inside diameter of tube: 1-5/8" Base Diameter: 2-1/2" Fastener - #10 (6) (Not Included)

Description - Cast 316 S.S. with full length vinyl liner. Fastener 1/4" Material: 316 Stainless Steel Fastener: 1/4" (3) Dimensions: L: Tube Length: 8-5/8" Flange: 3-5/16" x 4-5/16" Inside Diameter: Tube ID: 1-5/8

Bluewater 30 Deg. Stamped S.S. Flush Mount Rod Holder Description: Stamped SS construction with full white vinyl liner and gasket. Strong, durable, yet very economical.Material: 304 Stainless SteelFastener: 5/16" (3)Dimensions: L: Tube Length:...

Description: 304 S.S. removable rod holder Tube length: 9" Tube Inside Diameter: 1-7/8" Plate - 4"x3-3/4" Fastener - 5/16" (4)

Removable Outrigger Holder - Made of 304 S.S. Fits into any standard flush mount rod holder. Tube length: 12"Tube Inside Diameter: 1-5/8"Height: 17-1/2

Bracket: 316 S.S. - Fits 7/8" & 1" Rails Material: 304 Stainless Steel Dimensions: L: 10" Inside Diameter: 1-7/8"

Description: The new 316 Stainless Steel 360 Removable Rod Holder is the angler's dream. Dimensions: H: 3-5/8" x 2-1/2" Base: 1-5/8" Inside Diameter: 8-5/8"

Rod/Cup Holder - 304 Stainless Steel - 0°Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place. Features:304 S...

Rod/Cup Holder - 304 Stainless Steel - 15°Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place. Features:304 S...

Rod/Cup Holder - 304 Stainless Steel - 30°Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place. Features:304 S...