Sailing

Size 3 Vang SystemFeatures:Snap Shackle Head24' Line

Size 5 Vang Tackle 4:1Upgrade your existing Vang system or use it as a boom preventer.  Snap shackle fixings allow for quick and easy deployment.  Professionally spliced and assembled. Compatible With:Boats up to 35' (10.7 M)Technical...

Size 7 Single Plain Bearing Stand-Up BlockBarton plain bearing blocks have a precision molded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads. This range of high-load cruiser bocks is of rugged...

SkyDock Storage System 3 to 1 Reduction Up to 175 LBS 4-Point LiftSkyDock is the ultimate roof space storage solution for loads up to 175 lbs (80 KG.)  Designed for use in any space with a ceiling height of up to 13' (4 M), the SkyDock works in...

SkyDock Storage System 4 to 1 Reduction Up to 175 LBS 4-Point LiftSkyDock is the ultimate roof space storage solution for loads up to 175 lbs (80 KG.)  Designed for use in any space with a ceiling height up to 13' (4 M), the SkyDock works in...

Slab Reefing KitSupplied with sliding blocks which are held in place with spring-loaded plungers. Manufactured from stainless steel and 'Spectro' anodised aluminium.Complete with sufficient length of 'T' Track and end stops.Supplied with 60cm of 25mm...

Small Furling Drum - 2.99"Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.Features:Holds up to 4.3M of LineSpecifications:Drum Diameter:...

Small Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by...

Stanchion BullseyeBarton's Stanchion Mount Bullseye is ideal for use with furling lines in place of a block. The simple-to-fit mount features a large nylon bullseye with a 17 mm opening.

Stanchion Lead BlockBarton Marine's stanchion lead blocks have proven to be popular with Cruising sailors all over the World. Mounted onto the stanchion base, the stanchion lead block enables the Genoa furling line to be led back to the cockpit for easy...

Towable Genoa Car - Fits 25mm(1") T-TrackTowable genoa carsWith tow eye or sheave in place of plunger, allowing a control line to be lead aft so that genoa car adjustments can be made from the cockpit. Use in conjunction with end fittings shown...

Tuphblox Size 1 Single Block with Swivel & BecketBarton’s Tuphblox range will be manufactured using real OEM Tufnol® for maximum performance. Over time it has been improved as a synthetic resin-bonded fabric construction material to become...

Tuphblox Size 1 Single Block with SwivelBarton’s Tuphblox range will be manufactured using real OEM Tufnol® for maximum performance. Over time it has been improved as a synthetic resin-bonded fabric construction material to become a mainstay...

Winch Handle PocketThe winch handle pocket is manufactured to safely store and secure a wide range of handle types. Convenient hole on the bottom to allow drainage and increased airflow.Technical Specifications:Dimensions - 12.6" x 3.54" x 1.97"...

Outboard Motor Lifting Sling for Motors to 15hpDesigned and tested at Barton Marine by our design engineers, this Outboard Sling works where others slip and fail - holding most outboard engine brands up to 15hp. Maximum load weight 50kg (110lbs)The...

Quick Cleat - 5/16" - Black The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm)...

Quick Cleat - 5/16" - WhiteThe Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm) with a...

Quick Cleat - On a Patch for Inflatables - 1/4"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. The perfect solution for securing ropes onto inflatables, featuring a...

Quick Cleat - 1/4" - PairThe Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 1/4" (6 mm) with a...

Quick Cleat - Stainless Steel - 3/8"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The heavy-duty version is made of 316-grade Stainless Steel and is suited for...

Single DO 550 Rope Clutch Cruising Racing Max 12mm LineFor cruising and racing yachts, offering a holding power of up to 550 kgs. Modern, high-performance materials. Manufactured from modern lightweight materials, the DO 550 moulded parts are made...

Size 2 4:1 Vang System, Swivel HeadUpgrade your existing Vang system or use it as a boom preventer. Snap shackle fixings allow for quick and easy deployment. Professionally spliced and assembled. These can be used as Handy Billies.Features:For Boats up...

Size 3 45mm Plain Bearing Pulley Block Double Upright BlockThe size 3 Barton plain bearing blocks have 45mm (1 3/4" sheave size 3 block range incorporates modern design with stainless steel frames and the latest advanced materials, using 30% fibre glass...

Size 3 45mm Plain Bearing Pulley Block Stanchion Lead BlockThe size 3 Barton plain bearing blocks have 45mm (1 3/4" sheave size 3 block range incorporates modern design with stainless steel frames and the latest advanced materials, using 30% fibre glass...

Size 4 58mm Plain Bearing Pulley Cheek BlockThe Size 4 Barton range of blocks has a 58mm (2 5/16″) sheave. They are of a rugged construction featuring high-grade molded side plates that are through-bolted and riveted for added strength and...

Size 5 54mm Plain Bearing Pulley Block Reverse ShackleThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security...

Size 5 54mm Plain Bearing Pulley Block Single Block Fixed EyeThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are a rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and...

Size 5 54mm Plain Bearing Pulley Block Single Block SwivelThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and...

Size 6 64mm Plain Bearing Pulley Single Block Fixed EyeThe Size 6 Barton blocks are designed as our high-load cruiser block range and are of rugged construction. It features high-grade injection molded side plates, with all load-carrying components from...

Size 7 70mm Plain Bearing Pulley Block Single SwivelThe size 7 Barton high-load cruising block range is engineered for superior strength and performance and offers both plain and ball-bearing sheave assemblies. The range features high-grade glass fiber...

Spinnaker Pole Slide Car (32mm)Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends.Plain bearing genoa cars, sliders, and spinnaker pole slides,...

Stainless Steel Large Split Rings - 14mm - 10-PackFeatures:Easy-fit stainless steel split rings for use with our clevis pinsSupplied in packs of 10

Stainless Steel Split Rings - 10mm - 10-PackFeatures:Easy-fit stainless steel split rings for use with our clevis pinsSupplied in packs of 10Specifications:Weight: 3gDimensions: 30mm x 30mm x 4mm

Stanchion Ratchet BlockControlling the Power in Furling lines! This Stanchion Ratchet Block is ideal for removing some of the loadings for the crew when furling in the jib. The ratchet means that the sheave can be locked in place in one direction...

Tiller Extension 1000mm Carbon Fiber - Blue Soft GripFeatures the latest in uni-directional 16mm carbon fiber tube which incorporates an additional pull wound spiral layer for optimum strength, making it stronger than conventional carbon fiber tube, and...

Tiller Extension 900mm Carbon Fiber - Blue Soft GripFeatures the latest in uni-directional 16mm carbon fiber tube which incorporates an additional pull wound spiral layer for optimum strength, making it stronger than conventional carbon fiber tube, and...

Tufnol Snatch Block for Wire & Fibreoptic CablesThe Barton wire snatch block has been developed specifically as a low maintenance static free block. The Tufnol sheave means that static cannot build up in the block and cause electrical discharge...

TUPHblox Fiddle Block with Swivel & Cam + Becket - 20mm (25/32″) Size 0The TBC TUPHblox Fiddle Block with Swivel & Cam can be used with a shackle or rope. It is available with a becket if required. It is suitable for rope up to 8mm...

TUPHblox Fiddle Block withSwivel & Cam - 20mm (25/32″) Size 0The TBC TUPHblox Fiddle Block with Swivel & Cam can be used with a shackle or rope. It is available with a becket if required. It is suitable for rope up to 8mm (5/16″)...

Soft-Mate Equipment HoldersSafety-Soft, Flexible P.V.C. equipment holders designed to hold a variety of gear in convenient sizes for boat, RV, or Home. Designed not to hurt you or your equipment.All Soft-mates come with mounting screws.HH-3 Features:...