Trailering

Double U-Bolt Bolster Bracket - 8-3/4"Mounting bunk boards using double U-bolt bolster brackets provides the most rigid bolt-on bracket mounting possible. Made from heavy 7 ga galvanized steel, these brackets are 4” wide with slots that are...

Draw Bar Storage Bag Black Don't bang your shins! Store the draw bar and keep your vehicle clean Remove the draw bar and hitch ball from your vehicle to prevent banging your shin. Store it conveniently in your tow vehicle. Bag is padded with a strong...

CE Smith Dust Caps - Hub ID 1.980" - (Pair)Product DescriptionUse this dust cap to protect your axle nut.Features:Fits hub with inner diamerter of 1.98"Sold in pairsWARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are...

Grease Seals f/1" to 1-1/16" Straight SpindleProduct DescriptionNeed to reseal trailer wheels? No need to purchase an entire wheel bearing set when all you need are the seals. Smith "double-lip seals with gripper springs" are the best available and...

Jon Boat Support Bunk & Bracket Assembly24" carpeted bunk mounts crossways on the trailer tongue to support the flat bottom of a Jon boat. Adjustable from 5-1/2" up to 8" above tongue. Includes all mounting hardware for a 2" or 3" wide tongue. Board...

License Plate BracketUpgrade the appearance of your trailer with an aluminum tread plate license plate bracket. Fits standard left side DOT brake/tail lamps. No mounting hardware required. Installs between existing tail light mounting bracket and the...

Outboard Motor Dolly - 250lb. - RedMade from 14 gauge powder coated steel with a weather resistant synthetic wood mounting block this outbord motor dolly makes it easy to transport and hold your motor weighing up to 250 lbs. 8” wheels and 4"...

Package Roller Shaft 1/2" x 12-3/4" with Cap Nuts - ZincRoller shafts blister packed each with two cap nuts.Features:Length: 12-3/4"Max Grip: 12.190"

Package Roller Shaft 1/2" x 5-1/4" with Cap Nuts - ZincRoller shafts blister packed each with two cap nuts.Features:Length: 5-1/4"Max Grip: 4.690"

Package Roller Shaft 1/2" x 6-1/4" with Cap Nuts - ZincRoller shafts blister packed each with two cap nuts.Features:Length: 6-1/4"Max Grip: 5.690"

Panel Bracket Assembly 10" Keel Roller - BlackProduct DescriptionPre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 8" on center.

Panel Bracket Assembly 4"Spool Roller - BlackProduct DescriptionPre-assembled for easy installation! Strong hot-dipped galvanized bracket with 4" black rubber spool roller for proper keel support. Mounting slots are on 2" centers.

Panel Bracket Assembly 5" Keel Roller - BlackProduct DescriptionPre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 3" on center.

Pontoon Bolster Bracket - 15-3/4" x 2"Pontoon bolster brackets support bunkboards in a shallow V cradle configuration that best suits pontoon hulls. Best when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat. A bracket should be installed...

Post Guide-On 65" - AluminumThese post-guide-ons utilize uprights that mount directly to your I-Beam trailer frame using stainless steel u-bolts, nuts, and washers for a fit that will work on virtually any size I-Beam frame. The metal uprights can be...

Post Guide-On 60" - GalvanizedThese post-guide-ons serve the same purpose that all other Smith post-guide-ons do, however, these include metal uprights made of a thicker 12 gauge steel that has been hot-dip galvanized for more excellent corrosion...

PVC Replacement Cap - PairPVC Replacement Cap for 2" Trailer Boat Post Guide.

PWC DollyGreat for storage or maintance. This heavy-duty dolly is constructed with a strong galvanized tubular frame. Four rugged casters make it easy to move your PWC, jon boat, or inflatable. Two 4' carpeted bunks tilt and adjust to 12", 16", or 20"...

Ribbed Roller KitFor replacement of ribbed wobble rollers. Kit includes four 5" x 3" black ribbed rollers, four Delrin bushings, four 1-1/8" washers, four 3/4" washers and four retainer rings.Rollers fit 1-1/8" shaft Bushings included to convert to...

Ribbed Roller 4 Pack - Gold Replace your ribbed wobble rollers with this thermal-plasticized rubber ribbed roller kit Rollers fit 1-1/8" shaft Kit includes four 5" x 3" ribbed rollers with polypropylene hub, four Delrin bushings for 3/4" shaft, for...

Ribbed Roller Replacement Kit - 4-Pack - BlueReplace your worn ribbed rollers with this ribbed roller kit. Rollers fit 1 1/8" shaft or 3/4" shaft using included Delrin® bushings.Features:Blue TPRZinc plated washers & clipsKit includes:Four 5"...

Roller Bunk Mounting Bracket - 11"Perfect for use under roller bunks when the bunks need to be raised up off the frame.  Adjustable 11 ga top swivel bracket allows bunks to tilt to the shape of the hull. Features:11” tall1/2”...

S-Hook Keepers (Pair) - BlackProduct DescriptionThis handy rubber keeper provides an extra measure of safety for the safety chain by preventing the S-hook from bouncing out when you're driving on bumpy roads.Sold in pairsS-hook not includedWARNING: This...

Safety Cables - 5000lb Capacity - PVC Coated - PairSafety Cables ensure towing safety. Simply snap the set of 2 carabineer style hooks in place. Includes over 3' of cable length with the proper weight rating.Features:Capacity: 5000lbPVC...

Safety Chain Set (Pair) - Class IVProduct DescriptionZinc-plated, proof-coil chain features strong, heat-treated S-hooks to keep your trailer from separating from the tow vehicle if the coupler becomes unhitched. Remember to attach the open end of the...

Spare Tire Carrier - w/Brackets27201 Length: 8-3/8"Specially shaped 7/16" U-Bolt fits under trailer tongues up to 3" wide to secure a spare tire securely on top of the tongue. For all 4 and 5 lug spare wheels from 8" to 14" and most 15" wheels.WARNING:...

Spare Tire Carrier with Lug NutsStrong 7/16" rod construction fits on frame, tongue, or rails up to 3" wide. The 3" of threads fit a wide variety of frame thicknesses and wheel sizes. Holds 4 or 5 lug wheels and fits 8" throught 14" wheels and most 15"...

Spare Tire Carrier - w/Lug Nuts27206A Length: 12"Specially shaped 7/16" U-Bolt fits under trailer tongues up to 3" wide to secure a spare tire securely on top of the tongue. For all 4 and 5 lug spare wheels from 8" to 14" and most 15" wheels.WARNING:...

Spindle NutsReplacement spindle nuts for 1" axle shaft.Includes: Two 1" shaft spindle nuts Two 1" shaft washers Two 1-3/4" long cotter pinsSold in pairs.

Spool Roller 5" - 5/8" ID - Gold TPR with Bushing White SolidFeatures:Fits standard brackets and shaft sizesNatural rubber2-7/8" Diameter4-7/8" WidthGold TPR5/8" Shaft

Spring Hanger Bracket Kit Bolt-OnUse this spring bolt on hanger kit to mount your trailer springs.Includes: 2 bolt-on front spring hangers 2 bolt-on rear slipper spring hangers 2 shackle bolts and nuts

Stake PocketThe easiest and most secure way to add removeable sides to a trailer. Sized to receive standard 2" x 4" studs.Features:Bolts onto trailer 11 gauge Hot dipped galvanized3/8" holes for bolting to frameCenter hole for an optional locking...

Swivel Bracket Assembly - 8" BracketThis Smith adjustable bracket is designed to support bunk boards. Hot dip galvanizing for years of use in the harsh marine environment.This bracket assembly uses bolster bracket-10100G and swivel bracket-10200G...

Swivel Bracket KitGalvanized swivel top brackets provide vertical and tilting adjustments for trailer bunks.Swivel Brackets for mounting Bunk Boards to Bolster Brackets.Features:Bunk flange holes 3/8" dia.Bunk flange 1-3/8" x 3-1/2"Swivel flange hole...

Trailer Coupler Lift Handle Product DescriptionUse this trailer lift handle to make moving your trailer easier.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to...

Trailer Frame Clips - Zinc - 3/8" Wide - 10-PackAll trailer light kits come with a few of these clips, but never enough to secure the wiring along the frame as frequently as you want. With a pack or two of these clips, you can secure your drooping...

Trailer Hub Kit - 1-3/8" x 1-1/16" Tapered - 5 x 4-1/2" GalvanizedFeatures:1-3/8" x 1-1/16" Tapered5 x 4-1/2" GalvanizedWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of...

Hub Kits come complete and ready to install on your axle. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. WARNING: This product can expose you to chemicals including...

Trailer Hub KitHub Kits come complete and ready to install on your axel. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. Spindle: 1-3/8" - 1-1/16"Bolt Cir: 5 x 4.5Cap:...

Trailer Tongue Step PadThe Trailer Tongue Step Pad makes accessing your boat easy by providing a stable and steady place to anchor your feet. It can be mounted anywhere that is suitable, such as on trailer tongues or side rails.Features:Fits any 2x3 in...