Transducer Accessories

Chirp Junction Box for Raymarine CP470 Type ConnectorAirmar adapter box for single-band or dual-band CHIRP tranducers, with Raymarine 11-pin connector.This product may not be returned to the...

Fairing Block for B122 & DST-800LA replacement high-speed fairing block for the B122. This fairing can also be used for the DST800L.Dimensions: 13.5" L x 2.94" W x 2.96" T.This product may not be...

Fairing Block for B744VFairings orient the sound beam straight down by mounting the transducer parallel to the water surface.Features:Fairing: High-PerformanceDimensions: 13.6” x 3” x 3” This...

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer...

Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element TransducersFor use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts).This product may not be returned to the original point...

Furuno 33' 10-Pin to 10-Pin Extension CableFeatures:Transducer Extension Cable10-Pin(M) to 10-Pin(F) 33'This product may not be returned to the original point of purchase. Please contact the...

In-Hull TankThe tank is cut to the boat’s deadrise angle to ensure that the transducer is properly oriented for optimal performance.Features:2KW/3KW in-hull tank onlyFits: R199, R299, R399, R111,...

Mix & Match Cable for Raymarine 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m)...

Mix & Match™ Cable, 5-Pin 600W Series with Navico 7-Pin Blue Connector - 8MWorks on Airmar Non-CHIRP Transducers with a mix-and-match connector for Lowrance, Simrad, and Navico Transducers.

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m)...

MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer...

MM-HB Mix & Match™ Cable 5-Pin 600W Series with Humminbird #9 Connector - 9MSpecifications:Sensor Connector: MMDisplay Connector: HBMix and Match Series: 5-Pin 600 WattCountry of...

MM1-DST-10F Mix and Match™ Furuno 10-Pin CableMix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific...

MM1-DST-14HB Mix and Match™ Humminbird 14-Pin CableMix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m)...

MM1-DST-8G Mix and Match™ Garmin Blue 8-Pin CableMix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m)...

MM1-DST-BL Mix and Match™ Navico, Lowrance, Simrad, Blue 8-Pin CableMix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable...

MM1-DST-RAYA Mix and Match™ Raymarine 6/9-Pin CableMix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m)...

MM1-DT-9N Mix and Match™ Navico, Lowrance, Simrad 9-Pin CableMix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m)...

Navico 7-Pin Blue Mix & Match Chirp Cable - 1MAirmar's Mix & Match Chirp Cable for Navico.Features:Length: 1M7-PinColor: BlueThis product may not be returned to the original point of purchase. ...

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now...

Navico Mix & Match Cable for Low-Frequency CHIRP Transducers - 9-PinSpecifically for use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000W).This product may not be returned to the...

SS571 Stuffing Tube - Stainless Steel Replacement Stuffing Tube for R99, R109C, R209, R309, R409C, R509C, R609, CM260, CM265C, PM265C, CM111C, CM599C, M180 and M188 and most other Transducer...

ST850 Paddlewheel & Valve KitIncludes: 1 Paddlewheel and Shaft4 O-rings1 Valve Sleeve This product may not be returned to the original point of purchase. Please contact the manufacturer directly...

TDT Test Cable 1KW Mix & Match0.7M TDT Test Cable for use with TDT1000Specifications:Connector: Airmar 9-Pin (MM1), Airmar 9-Pin (TDT)Sensor Connector: MM1Display Connector: 9TDTCountry of Origin:...

TDT Test Cable 600W Mix & Match0.7M TDT Test Cable for use with TDT1000Specifications:Connector: Airmar 5-Pin (MM), Airmar 9-Pin (TDT)Sensor Connector: MMDisplay Connector: 9TDTCountry of Origin:...

Transducer Mounting PlateFeatures:Marine-grade polymer plate will not warp or corrodePremium materials; unaffected by UV raysMounts easily with only 2 screwsAll hardware included...

Complete kit for mounting depth transducer inside GRP hull.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns...

Spare paddlewheel and spindle, simple fit for all Clipper Logs.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or...

1M Adapter Cable with Female 8-Pin Garmin Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Garmin units.

1M Adapter Cable with Male 8-Pin Black Box Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with SI-TEX NavPro units.

1M Adapter Cable with Male 9-Pin Navico Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Navico units.

Hydrodynamic Fairing Block for CB101 Series TransducersEchonautics fairing blocks are made for the thru-hull installation of traditional stem transducers. A fairing block is recommended for the...

Hydrodynamic Fairing Block for CB131 Series TransducersEchonautics fairing blocks are made for the thru-hull installation of traditional stem transducers. A fairing block is recommended for the...

10-Pin to 12-Pin Adapter Cable (0.4m) for TZT3Features:10-Pin to 12-Pin endsLength: 0.4mUsed specifically for Furuno's TZT3This product may not be returned to the original point of purchase. Please...

12-Pin XDR Extension Cable - 10MFeatures:Extension Cable For Furuno Transducer10M (33' Length)12-PinColor: BlackThis product may not be returned to the original point of purchase. Please contact...

50 Meter Cable Kit w/ Junction Box, FI5001WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For...

Adapter Cable, 8-Pin Transducer to 10-Pin SounderWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive...

The AIR-033-226 is a standard fairing block for transducers utilizing the Airmar B-256 housing.WARNING: This product can expose you to chemicals which are known to the State of California to cause...

AIR-033-351The AIR-033-351 is a standard fairing block for transducers utilizing the Airmar B-45 housing.WARNING: This product can expose you to chemicals which are known to the State of California...

The AIR-033-352 is a high performance fairing block for transducers utilizing the Airmar B-45 housing.WARNING: This product can expose you to chemicals which are known to the State of California to...