C. Sherman Johnson

Handy Lock Turnbuckle Jaw/JawThe 01 Series Handy Lock turnbuckle is one of our oldest products and still stands the test of time. Neat and compact and positively locked without cotter pins or check...

Quick Release Shroud Adjuster - 1/4" PinDeveloped for dry-sailed one-design dinghies. When the quick-release pin is pulled, easy adjustment can be obtained. 1/4″ pin.Specifications:Pin-to-pin...

Quick Release Lever - 5/16" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls...

Quick Release Lever - 1/4" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls...

Double Jaw Rigging Toggle - 3/8" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins...

Double Jaw Rigging Toggle - 5/16" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins...

Double Jaw Rigging Toggle - 1/4" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins...

Rigging Toggle - 3/8" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made...

Rigging Toggle - 5/16" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made...

Rigging Toggle - 1/4" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made...

Hinged Mini Pad Eye - 3/16"This pad eye is a smaller version of our popular #48-580 pad eye. This unit is suitable for awnings and many other tie-down applications. The working load should not...

Hinged Pad Eye- 5/16"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures...

"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve...

"Captain Hook" Chain Snubber Large Snubber Hook for 3/8" & 1/2" Chain with 15' of 5/8" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and...

"Captain Hook" Chain Snubber Small Snubber Hook Only (5/16" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve...

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and...

Spreader Flag Halyard KitIncludes 40ft. of polyester line, block with bail and shroud cleat.

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" hole). The hole will not accept cast gate hooks...

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1". 

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:3/16" Wire1/4" Pin1" adj.

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:1/8" Wire1/4" Pin1" adj.

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Double Threaded Interlocking Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Interlocking Swivel Gate Eye for 3/16" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

Interlocking Swivel Gate Eye for 1/8" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Single Threaded Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook.

Single Swivel Gate Eye for 1/8" WireA single eye is used on one end of the gate area to attach the gate hook.

Deck Toggle Turnbuckle to Hand Crimp Terminal for 3/16" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications:3/16" Wire1/4"-283" adj.

Deck Toggle Turnbuckle to Hand Crimp Terminal for 1/8" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications:1/8" Wire1/4"-283" adj.

Closed Body Jaw to Swage Tubular Turnbuckle for 3/16" WireJaw to swage- Check Nut Locking.Specifications:3/16" Wire1/4" Pin3" adj.

Closed Body Jaw to Swage Tubular Turnbuckle for 1/8" WireJaw to swage- Check Nut Locking.Specifications:1/8" Wire1/4" Pin3" adj.

Open Body Jaw to Swage Turnbuckle for 1/8" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications:1/8" Wire1/4" Pin3" adj.