Hunting & Fishing

9" Backing Plate for Screwless Rod Holders - Stainless SteelFeatures:For 9" Screwless Rod Holder

9" Side Mount Rod Holder - 1-5/8" I.D.316 Stainless Steel Designed for applications where clamp-on or flush mount holders are not practicalCan be mounted on any vertical flat surfaceWhite vinyl insert included to protect your rod

9" Swivel Side Mount Rod Holder - 1-5/8" I.D.316 Stainless Steel Designed for applications where clamp-on or flush mount holders are not practicalCan be mounted on any vertical flat surfaceWhite vinyl insert included to protect your rod

Adjustable Deep Drop Lead HolderFeatures:Fits into gunnel rod holderAdjustable angles, 0, 15 and 30 degreeProtect your boat and rod holders from damagePerfect for Sword Fishing and Deep DroppingPortable and StorableAnodized Aluminum

All Purpose Kite - YellowThe All Purpose Kite will exceed all of your expectations and fly steady in 10-15 mph winds with a simple adjustment to the bridle, eliminating the need to use different kites for different winds. Lightweight spars are...

Antenna Flag ClipThe Tigress line of outrigging accessories features a great selection of accessories to fit the needs of any fisherman.Whether you have 15' skiff poles or 35' double rigged tournament poles, Tigress has a rigging accessory for you. All...

Backing Plate for 10.5" Screwless Swivel Rod HolderFeatures:For 10.5" Screwless Rod Holder

Black Plastic Cup Holder Insert w/SS Ring On TopMates with PCHE

Black Plastic Outrigger Stops - 1-1/4" - PairThe Tigress line of outrigging accessories features a great selection of accessories to fit the needs of any fisherman.Whether you have 15' skiff poles or 35' double rigged tournament poles, Tigress has a...

Blind Mount Round Head Closed Base Rod Holder - 0° - 9"Eliminate fastening from the top of flange and enhance the look of your gunnelWith drain hole to accept 1/4" NPT pipe to hose fittingHead Size: 3.84"Length: 9"Angle: 0° HeadInner Diameter:...

Blind Mount Round Head Closed Base Rod Holder - 15° - 9"Eliminate fastening from the top of flange and enhance the look of your gunnelWith drain hole to accept 1/4" NPT pipe to hose fittingHead Size: 3.84"Length: 9"Angle: 15° HeadInner...

Blind Mount Round Head Closed Base Rod Holder - 30° - 9"Eliminate fastening from the top of flange and enhance the look of your gunnelWith drain hole to accept 1/4" NPT pipe to hose fittingHead Size: 3.84"Length: 9"Angle: 30° HeadInner...

Blue Marlin Release Flag - 12" x 18"Display your catch proudly with Tigress Release Flags! Designs available for Swordfish as well as Blue and White Marlin. All flags are the standard 12” x 18”. 

Bolt On Transom Mount Rod HolderFeatures:Polished aluminum4 hole 3" x 4-1/2" brushed pad10" flared rod holderWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or...

Bucket Lead HolderFeatures:No more banging up your boat deck or storage compartmentsKeep deep drop leads organized on and off the boatStore up to 14 lead weights of multiple size and weight Fits most standard 5 gallon buckets Made of high...

Center Rigger Clamp-On SystemFor multiple lines in the water.Features:Clamp-on center rigger holder 1-1/8" OD baseTigress Track® telescoping center riggerCenter rigger kitHolder sized to fit 1-5/16" schedule pipeSpecifications:Mount: 1-1/8"...

Center Rigger Clamp-On SystemFor multiple lines in the water.Features:Clamp-on center rigger holder 1-1/8" OD baseTigress Track® telescoping center riggerCenter rigger kitHolder sized to fit 1-5/16" schedule pipeSpecifications:Mount: 1-1/8"...

Center Rigger Holder - 1-5/16" IPS Pipe - 1-1/8" HolderOur premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. Fits 1" Pipe Size.

Center Rigger Kit - Black NylonFor double rigging your outriggers - for riggers up to 22'Features:30' of Black Nylon BraidHigh impact release clip1-1/4" cork stopGlass ring snubberEye strap with screw2 leader snaps

Clip Kite Release Kit3 Clips3 Wind-On Swivels1 Coastlock SwivelTigress has put together the most comprehensive line of kite fishing products available to the sportfishing industry.

Complete Tag Line KitFeatures:Hi-polished 316 stainless steel tag line weight with 1/4" rubber bumper to protect your boat35' of 400lb black monoCork stops316 stainless steel snaps2 #64 rubber bands

Deluxe Rigging Kit - Black NylonFor single rigged riggers up to 20'Features:100' of Black Nylon BraidPair of high impact release clipsPair of 1-1/4" cork stopsPair of glass ring snubbersPair of eye straps with screws4 leader snaps

Double Halyard Lock - 12"Features:Locks Outrigger Line in place with no-slip or creep.12” bungee with SS Snap Lock Swivel

Console Double Spinning Rod HolderFeatures:Polished aluminumInternal threaded 1/4-20WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For...

Down Rigger Release ClipThe Tigress line of outrigging accessories features a great selection of accessories to fit the needs of any fisherman.Whether you have 15' skiff poles or 35' double rigged tournament poles, Tigress has a rigging accessory for...

Dual Aluminum Kite Rod Holder - Straight ButtFeatures:Designed to increase your rod storage capacity, or use one side for your kite rod and the other for your fishing rodConstructed of cold drawn anodized aluminumTube ID 1-5/8" Base OD 1.49"

E-Z Outrigger Release Clips - PairThe Tigress line of outrigging accessories features a great selection of accessories to fit the needs of any fisherman.Whether you have 15' skiff poles or 35' double rigged tournament poles, Tigress has a rigging...

Economy Rigging Kit - White NylonAffordable kit designed for small boat riggers up to 15'Features:100' of White Nylon BraidPair of high impact release clipsPair of 1-1/4" cork stopsPair of glass ring snubbersPair of eye straps with screws

Economy Stainless Steel Gunnel Mount Rod Holder- 0°Features:316 Stainless SteelBlack Liner9” w/ Oval Cast Flange TopPin Base Specifications:Angle: 0 DegreesBox Dimensions: 4"H x 4"W x 10"L WT: 1.5 lbsUPC: 661033772700

Economy Stainless Steel Gunnel Mount Rod Holder- 15°Features:316 Stainless SteelBlack Liner9” w/ Oval Cast Flange TopPin Base Specifications:Angle: 15 DegreesBox Dimensions: 4"H x 4"W x 10"L WT: 1.5 lbsUPC: 661033772717

Economy Stainless Steel Gunnel Mount Rod Holder- 30°Features:316 Stainless SteelBlack Liner9” w/ Oval Cast Flange TopPin Base Specifications:Angle: 30 DegreesBox Dimensions: 4"H x 4"W x 10"L WT: 1.5 lbsUPC: 661033772731

Elite Rigging Kit - Black NylonTop Quality KitFeatures:100' of Black Nylon BraidPair of EZ release clipsPair of 1-3/4" cork stopsPair of single swivel snubbersPair of eye straps with screws4 leader snaps

Five Banger Aluminum Rod Holder - Bent ButtFeatures:Designed to increase your rod storage capacity from 1 to 5 and keep your fishing rods in easy reachConstructed of cold drawn high polished anodized aluminumTube ID 1-5/8" Base OD 1.49"

Five Banger Aluminum Rod Holder - Straight ButtFeatures:Designed to increase your rod storage capacity from 1 to 5 and keep your fishing rods in easy reachConstructed of cold drawn high polished anodized aluminumTube ID 1-5/8" Base OD 1.49"

Five Rod Cluster - Bent Butt - Polished AluminumFeatures:Smaller, more compact than Tigress' Five Banger AluminumDesigned to increase your rod storage capacity from 1 to 5 and keep your fishing rods in easy reachConstructed of cold drawn high polished...

Flat Line Release ClipThe Tigress line of outrigging accessories features a great selection of accessories to fit the needs of any fisherman.Whether you have 15' skiff poles or 35' double rigged tournament poles, Tigress has a rigging accessory for you...

Glass Outrigger Rings - PairThe Tigress line of outrigging accessories features a great selection of accessories to fit the needs of any fisherman.Whether you have 15' skiff poles or 35' double rigged tournament poles, Tigress has a rigging accessory...

GS Trident Rod Holder - Bent Butt - Polished AluminumFeatures:Smaller, more compact than our original Triple Kite Rods Used for one kite rod and two additional rods to increase your rod storage capacity and keep them up and out of the...

GS Trident Rod Holder - Straight Butt - Polished AlumunimFeatures:Smaller, more compact than our original Triple Kite Rods Used for one kite rod and two additional rods to increase your rod storage capacity and keep them up and out of the...

Gunnel Mount Backing Plates f/88502 Outrigger Holder - PairMade of heavy gauge stainless steel. Sized for cast outrigger holders only.