Ram Mount Store

RAM Short Double Socket Arm for 1.5" Ball BasesThe RAM-201U-B, SHORT double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket...

RAM 18" Long Extension Pole with (2 qty) 1" Diameter Ball Ends, and Double Socket ArmThe RAP-BB-230-18-201U consists of a LONG extension pole with (2 qty) 1" diameter ball ends and double socket arm. Dimensions:Overall Length (Arm Socket to Ball End):...

The RAM antenna mount is designed to hold most VHF and similar antennas. The rubber ball and socket system securely mounts the antenna while allowing for almost infinite adjustment. Mount the antenna on a horizontal or vertical surface or anywhere in...

No-Drill™ Laptop Mount for '05-21 Toyota 4Runner & TacomaThe RAM® No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration...

Ram Mixed Combination Pin-Lock™ Security Knob, Stud and Key Knob f/ Gimbal BracketsThe RAM® Gimbal Security Knob is a great solution for securing your gimbal mounted electronics, whether or not it's mounted on a RAM®. The universal design...

RAM® Composite Universal Marine Electronic MountThe RAP-B-111U consists of a 2" x 2.5" rectangle base, STANDARD length double socket arm and 6.25" x 2" rectangle plate. The rectangle base contains pre-drilled holes, including the universal AMPS hole...

Ram Rod 2007 Holder With BaseRAM designs fishing rod holders like nobody else. Take a look at the original RAM ROD series released in the year 2000. This unique concept did a whole lot more that just support a fishing rod. Allowing a quicker response to...

RAM® Tele-Pole™ with 12" & 18" Poles, Double Swing Arms & Round PlateThe RAM-VP-SW1-1218 consists of a 18" lower female Tele-Pole™, 12" upper male Tele-Pole™, double swing arm and 2.5" round base that contains the universal...

RAM® Track Plate Ball Base for Tite-LokFeatures:Hardware Included: (2) 1/4"-20 x 5/8" Knobs Ball/Socket Size: D Size (2.25")Materials: Marine-grade aluminum

Spacer Plate Accessory for Flush Mounting A great addition to any surface mounting application, the RAM® cable manager creates an integrated route for electrical wiring and cleanly covers installation holes. This cable manager is made of...

Torque™ 1-1/8" - 1-1/2" Diameter Handlebar/Rail Base with C Size 1.5" BallThe RAM® Torque™ handlebar and rail mounting base has a 1.5” rubber ball and accommodates bars 1-1/8” to 1-1/2” in diameter. Sizing inserts are...

Transducer Mount with 18" Rigid Aluminum Rod for Lowrance TotalScanKayak fishing is all about adaptability, and RAM® Mounts offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. The Transducer Arm...

RAM X-Grip IIPart #: RAM-HOL-UN8BU Sometimes, its all about the design. If you are looking for a compact mount for your tablet without that cookie cutter shape, you've found it. The RAM X-Grip II has a clean and clever four leg design that sports great...

1.5" Ball Mount with 2.5" Round Base, Short Arm & 2" x 4" Plate for the Humminbird Helix 7 OnlyThe RAM-202-24-B-202U, powder coated marine grade aluminum mount, consists of a short double socket arm mount, one round 2.5" diameter round base with the...

2" x 5" Rectangle Base with 2.25" BallThe RAM-D-202U-25 consists of a 2.25" diameter rubber ball connected at right angles to a 2" x 5" rectangular base. This mount has pre-drilled holes at each corner of the base.Features:Material: Powder Coated Marine...

This RAM high strength composite cradle is designed to hold the following devices: Garmin nuvi 200wGarmin nuvi 205wGarmin nuvi 250wGarmin nuvi 255wGarmin nuvi 260wGarmin nuvi 265wtMaterial:High Strength Composite Note:The "U" in the part number reflects...

The RAM-D-201U powder coated marine grade aluminum 6.88" double socket arm allow for connnection to a 2.25" diameter ball. Socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions:Overall Length: 8...

RAM Long Double Socket Arm for 1.5" Ball BasesThe RAM-201U-D, LONG double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection...

The RAM-D-201U-E powder coated marine grade aluminum LONG double socket arm allows for connnection to a 2.25" diameter ball. Socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions:Overall Length: 12...

RAM 1.5" Ball Mount with 6.25" X 2" Rectangle Base, Double Socket Arm & Track Ball™ BaseThe RAM-111B-354-TRA1U consists of a Track Ball™ base that can attach to any track system including the RAM Tough-Track™. Connected...

Compatible Vehicles:Freightliner TrucksInternational TrucksKenworth TrucksMack TrucksPeterbilt TrucksVolvo TrucksThis No-Drill™ Big Rig Laptop Stand installs quickly and easily into the specified vehicles using the existing hardware of the...

RAM Transducer Arm Mount with 18" Rigid Aluminum Rod and Open Single Socket: Compatible with all RAM 1" Ball BasesKayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of...

Universal D Size Ball Mount with Short Arm and Hi-Torq™ Wrench for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-C-KNOB9H consists of a base with a 2.25” diameter D size ball, a short arm, a Hi-Torq™wrench and a 6.25” x...

RAM 1" Tough-Ball™ with 1/4" -20 x .25" Male Threaded PostIntroducing the new RAM Tough-Ball™. Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility...

1" Ball Mount with 6.25" X 2" Rectangle Base & Diamond BaseThe RAM-B-111-238U consists of a double socket arm, 2.43" x 1.31" diamond base and 6.25" x 2" rectangle base. The diamond base contains two holes 1.912" from center to center, positioned at...

1" Diameter Ball Mount w/Short Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern)The RAM-B-111U-A consists of a short double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains...

1.5" Ball Adapter for John DeereFeatures:Material: Powder Coated Marine Grade AluminumBall Size: 1.5" Rubber Ball SizeNote: The "U" in the part number reflects product packaged in poly bag.Compatibility: Compatible with the GS2600 & GS2630 John...

RAM 1.5" Ball Base w/Strap 0.5" to 2" DiameterThe RAM-108BU consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter.Material:Powder Coated Marine Grade Aluminum Ball Size: 1.5"...

RAM 1.5" Rail Mount w/Double U-Bolt Base & 3.625" Square Base (VESA 75mm x 75mm Hole Pattern)The RAM-334U consists of a double socket arm, 3.625" square plate with a 75mm X 75mm VESA hole pattern and stainless steel double u-bolt base that will fit...

1.5" Tough-Ball™ with 1/4-20 x .625" Male Threaded PostThe RAM Tough-Ball™....Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel...

The RAM-D-202U consists of a 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees and three holes at 120 degrees. Material: Powder...

RAM 6.25" x 2" Universal Electronics Base with 1.5" BallThe RAM-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will...

RAM Adapt-A-Post 9" Extension PoleVersatility. That one word sums up what you get when you purchase RAM products. For Kayaks, versatility is key since space is always at a premium. Whether it's to make some room or put your fishing rod within easy...

The powder coated marine grade aluminum base contains a 1" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base. Material:...

Description:The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows...

RAM Double Swing Arm with 8" Male Tele-Pole™, 9" Female Tele-Pole™ & 2.5" Round Base (AMPs Hole Pattern)DescriptionThe RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded...

EZ-Roll’r™ Locking Cradle for the Garmin Fleet 770, 780 & 790The EZ-Roll’r™ cradle for the Garmin Fleet 770/780/790 provides a secure fit with quick and easy one-handed attachment and removal of the device from the cradle...

RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base & Round Base Adapter that contains the AMPs Hole PatternPart #: RAM-B-149Z-202UThe u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the...

RAM Large Cable Manager f/2.25" Diameter Ball BasesThe RAM Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application. The RAM Cable Manager is made of...

No-Drill™ Laptop Base f/'17-20 Ford F-Series + More The RAM No-Drill™ laptop mounting base for the 2015 Ford F-150 features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger...