Ram Mount Store

RAM 16.75" Long Extension Pole with (2 qty) 1" Diameter Ball EndsThe RAP-BB-230-18U consists of a LONG extension pole with 2 1" diameter ball ends. The ball ends are compatible with all 1" ball double socket arms. Dimensions:Pole Length (Ball End to...

RAM 2" x 3" Rectangle Base w/1" BallThe RAM-B-202U-23 contains a 1" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade...

RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 1/4"-20 Threaded Male Post for CamerasThe RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the...

RAM 3.68" Diameter Base w/BallThe (RAM-240U), marine grade aluminum base, consists of a 1.5" diameter rubber ball connected to a flat 3.68" diameter base. This base has pre-drilled holes that connects to RAM Tough-Dock Powered Docking Stations...

RAM 3.68" Diameter Base w/3-3/8" BallPart #: RAM-E-202UThe RAM-E-202U consists of a 3.38" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180...

B Size 1" Fishfinder Mount for the Lowrance Hook2 SeriesDesigned for light duty fresh water use, this B size (1”) aluminum drill-down kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts...

RAM Combination Brake/Clutch Reservoir U-Bolt Mount with Diamond Base AdapterSimply attach the RAM ball base to the brake/clutch handlebar control bracket and the possibilities become endless. Rubber ball and socket technology allows for almost infinite...

RAM 1" Diameter Ball with 1/4-20 Stud for Cameras, Video & CamcordersThe RAP-B-366U, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a round plate with 1/4"-20 camera thread. The round plate provides extra...

Composite Double Socket Swivel ArmThe RAP-B-200-12U, double socket swivel arm, consists of double 1" diameter open ball sockets with a 360° rotation point at the center of the arm. The rubber ball and socket at each end, and a central pivot point...

RAM Composite Short Double Socket Arm f/1" Ball BasesPart #: RAP-B-201U-AShort double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket...

The RAP-111U consists of a 2" x 1.7" 2" x 1.7" square base that contains the universal AMPs hole pattern, STANDARD LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will...

Cradle for Garmin dezl™ 760LMT, nuvi® 2797LMT & RV 760LMTThe RAM-HOL-GA54U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole...

This RAM high strength composite cradle is designed to hold the following devices: Garmin Astro 320Garmin GPSMAP 62Garmin GPSMAP 62sGarmin GPSMAP 62scGarmin GPSMAP 62st Garmin GPSMAP 62stc Material:High Strength Composite

RAM Cradle Holder for Garmin Montana® SeriesThis RAM high strength composite cradle is designed to hold the following devices: Garmin Montana 600 Garmin Montana 650 Garmin Montana 650tMaterial:High Strength Composite Note:The "U" in the part number...

RAM Cradle Holder f/Garmin nüvi 50 & 50 LMPart #: RAM-HOL-GA50UThis RAM high strength composite cradle is designed to hold the following devices: Garmin nüvi 50 Garmin nüvi 50LMMaterial:High Strength Composite Note:The "U" in the part...

RAM Cradle Holder for the Garmin nüvi 52, 52LM, 54 & 54LMThis RAM high strength composite cradle is designed to hold the following devices: Garmin nüvi 52Garmin nüvi 52LMGarmin nüvi 54Garmin nüvi 54LMFeatures:1. Open access to...

This RAM high strength composite cradle is designed to hold the following devices: Garmin Approach G5Garmin Oregon 200Garmin Oregon 300Garmin Oregon 400cGarmin Oregon 400iGarmin Oregon 400tGarmin Oregon 550Garmin Oregon 550tGarmin Oregon 600Garmin...

RAM Cradle Holder for the Garmin Rino 610, 650 & 655t This RAM high strength composite cradle is designed to hold the following devices: Garmin Rino 610 Garmin Rino 650 Garmin Rino 655t Material:High Strength Composite Note:The "U" in the part...

RAM EZ-ROLL'R Cradle f/SPOT Gen3This RAM high strength composite cradle is designed to hold the following devices: SPOT Gen3Features: Open access to all electronic ports Patented roller design for super smooth placement and removal of the SPOT Gen3 ...

D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ WrenchThe RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes,...

D Size 2.25" Ball on Round Plate with AMPS Hole PatternThe RAM-D-254U consists of a 2.25" diameter rubber ball, connected at right angles to a 2.4375" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180...

RAM 2-7/16" X 1-5/16" Base w/BallPart #: RAM-238UThe powder coated marine grade aluminum base contains a 1.5" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center,...

Double Ball Mount with Two 1.5" x 3" PlatesThe RAM-B-102U-153 consists of a medium length B size 1" double socket arm and two 1.5” x 3” rectangular ball bases that contain 1" x 2.5" hole patterns. The ball and socket system provides shock...

RAM Double Socket Arm f/3-3/8" Ball BasesPart #: RAM-E-201UThe RAM-E-201U double socket arm has a socket at both ends that accommodates 3.38" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket...

Double Socket Arm with Two 2.5 Inch Round BasesThe RAM-101-G2U consists of a double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with...

Double Socket Arm with Dual Extension & Ball AdapterThe RAM-B-201U, Medium length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm, keeps the socket open, allowing you to incert the ball...

RAM Double Socket Arm w/ Pin-Lock™ Security Knob and Key Knob f/ 1.5" Ball Bases

RAM Double Swing Arm with 8" Male and No Female Tele-PoleMaterial: Powder Coated SteelColor: Black Powder Coat

Double U-Bolt Base with D Size 2.25" Ball for Rails from 1.25" - 1.5" in DiameterThe RAM-D-235-1U consists of a double u-bolt base with 2.25" diameter ball and two zinc-coated u-bolts. The double u-bolt base will accommodate rails from 1.25" to 1.5" in...

Double U-Bolt Base w/D Size 2.25" Ball for Rails from 1" to 1.25" in DiameterThe RAM-D-235U consists of a double u-bolt base with 2.25" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in...

Dual Articulating Suction Cup w/Medium Length Double Socket Arm & Universal X-Grip® Cradle f/12" Large TabletsThe RAM-B-189-PIV1-UN11U consists of a dual articulating 3.3" twist lock suction cup base, double socket arm, and universal X-Grip®...

RAM EZ-ROLL'R Model Specific Cradle f/Apple iPad 4, iPad 3 and iPad 2 w/o Protective CaseThe RAM-HOL-AP15U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and...

EZ-Roll'r™ Cradle for Apple iPad Pro 11"The RAM® EZ-Roll’r™ cradle for the iPad Pro 11” secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top...

Fishfinder Mount for Lowrance Hook2 Series - 1" Track MountDesigned for light duty fresh water use, this B size (1”) Track Ball™ kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts...

RAM Flat Surface Mount w/Cradle for Garmin dēzl GPSRAM Cradle Holder for the Garmin dēzl 560LMT & 560LT:This RAM high strength composite cradle is designed to hold the following devices: Garmin dēzl 560LMT Garmin dēzl 560LT...

RAM Handlebar/Rail Mount f/Garmin Montana® SeriesIncluded is mounting hardware that will accommodate rails from 0.5" to 1.25" in diameter. This RAM high strength composite cradle is designed to hold the following devices: Garmin Montana 600 Garmin...

Horizontal 6" Swing Arm Mount with BallThe RAM-109H-2BU consists of a 6" long STRAIGHT swing arm mounted on a horizontal surface mounting base. At the free end of the mount swing arm is a round 1.5" diameter ball. The connection between the swing arm...

RAM Adjustable Laptop Screen Support ArmDescription:The RAM-234-S2U is a screen support arm with spring loaded keeper; this allows it to travel smoothly with the screen through numerous viewing angles. The screen support arm stores easily when not in...

RAM Mount Large Tough-Claw Base w/Double Socket Arm & 1.5" Round Base AdapterThe RAP-401-202U consists of the large Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™: is the perfect mounting base for quick and easy...

RAM Large Tough-Claw with 1" Diameter Rubber BallThe RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 1" to 2.25"...