Ram Mount Store

1" Ball "Light Use" Flat Surface Mount f/Raymarine DragonflyThe RAM-B-101-RYM1 consists of (2 quantity) 2.5" diameter round bases that contains the universal AMPS hole pattern and standard length double socket arm. Included are (3 quantity) (#8-32 x...

RAM Motorcycle 1" Ball Adapter for Brake/Clutch Reservoir BaseThis ball connects to the open hole on the side of the RAM-B-309-1U (single 1" ball) and is included with the purchase of the RAM-B-309-2U (double 1" ball). Material: Powder Coated Marine...

RAM 1" Ball Connected to a 3/8"-16 Threaded PostThe RAM-B-236U consists of a 1" rubber ball connected to a 3/8"-16 threaded post. Material: Powder Coated Marine Grade Aluminum Ball Size:1" Rubber "B" Ball SizeNote: The "U" in the part number reflects...

Ram 1" Diameter Ball Mount with 2/2.5" Round Bases and Short ArmThe RAM-B-101-A consists of a SHORT double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1" diameter patented...

RAM 1" Ball Marine Electronic "LIGHT USE" Mount for the Garmin echo™ 100, 150 & 300cThe RAM-B-101-G4 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and round adapter base that attaches directly to...

1" Ball Marine Electronic Base f/Humminbird & LowranceThe RAM-B-107BU is a marine grade aluminum base with 1" rubber ball. The base connects to the underside of Humminbird and Raymarine marine GPS devices.Material:Powder Coated Marine Grade AluminumBall...

1" Ball Marine Electronics Mount with Diamond BaseThe RAM-B-107U-238 consists of a double socket arm, diamond base and connecting Humminbird/Apelco marine base. Designed into the mount is a 1" diameter patented rubber ball and socket system with...

RAM 1 Inch Ball with 1/4-20 Stud for Cameras The RAM-B-237U, universal camera and camcorder base consists of a 1" diameter rubber ball, connected to a 1/4"-20 camera thread. The male thread matches most standard camera and camcorder female threads found...

RAM 1" Diameter Ball Mount w/2 Diamond BasesThe RAM-B-102U consists of a double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the...

RAM 1" Diameter Ball Mount with Long Arm & 2/Diamond BasesThe RAM-B-102U-C consists of a long double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at...

RAM Mount 1" Diameter Ball Mount w/Long Double Socket Arm & 2/2.5" Round Bases - AMPS Hole Pattern (7-5/16" Length)The RAM-B-101U-C consists of a long double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The...

RAM 1" Diameter Ball Mount with Short Arm & 2/Diamond BasesThe RAM-B-102U-A consists of a short double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned...

RAM 1" Diameter Ball Mount with Short, Double Socket Arm, 2.5" Flex Adhesive Base & Diamond Base AdapterThe RAP-B-378-A-238U consists of the flex adhesive base with 1" ball, SHORT SIZE double socket arm and and diamond base adapter. The mount is...

RAM 1" Diameter Ball Standard Length Double Socket Arm with 3.25" Diameter Suction Cup Twist Lock BaseThe RAM-B-166-103U consists of a 3.25" suction cup twist lock base, 1" ball diamond base and standard length double socket arm. The suction cup base is...

Unpackaged Ram Wedge MountKeeping things simple and versatile, the new RAM Ball Wedge Mounts are agreat way to provide a mounting point to practically anything. Simply slidethe wedge into the round opening of your rod holder base and tighten thescrew. ...

Unpackaged Ram Wedge MountKeeping things simple and versatile, the new RAM Ball Wedge Mounts are a great way to provide a mounting point to practically anything. Simply slide the wedge into the round opening of your rod holder base and tighten the screw...

Mount 1" Tough-Ball™ with M6-1X6mm Male Threaded PostRAM Mount's Tough-Ball™. Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel...

RAM 1" x 1" U-Channel Clamp with 1" Ball The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts...

RAM 1" x 2" Rectangle Base with 1.5" BallThe RAM-202U-12 consists of a 1.5" diameter rubber ball connected at right angles to a 1" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material:Powder Coated Marine...

1.5" Ball "Rugged Use" Composite Mount f/Lowrance Elite-5 & Mark-5 Series FishfindersThe RAP-101U-LO11 consists of a 2.5" diameter round base that contains the universal AMPS hole pattern double socket arm and adapter base that inserts directly to the...

1.5" Ball "Rugged Use" Mount f/Garmin echo 200, 500c, & 550cThe RAP-101U-G4 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and round adapter base that attaches directly to the back of the Garmin echo...

RAM 1.5" Diameter Ball Mount with 2/2.5" Round Bases - AMPs Hole PatternThe RAM-101U consists of a double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1.5" diameter patented...

1.5" Double Ball Mount with Hardware for Garmin Striker + More The RAM-101-G4 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and round adapter base that attaches directly to the back of the Garmin echo...

RAM 1.5" Diameter Ball Mount with Short Double Socket Arm & 2/2.5" Round Bases w/AMPs Hole PatternThe RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1...

RAM Mount 1.5 Inch Ball Short Arm with 2.5 Inch Round BaseThe RAM Mount RAM-103U-B mount, with short arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases...

Description:The Ball Side Track Base consists of a t-bolt, ratchet tooth and groove composition and 1.5" rubber ball. With a turn of the knob you can quickly fasten, adjust or remove the base to your existing track system. The ratchet tooth and groove...

RAM 1.5" Ball with 1/4"-20 Male Threaded Post for CamerasThe RAM-237U, universal camera and camcorder base, consists of a 1.5" diameter rubber ball, connected to a 1/4"-20 camera thread. The male thread matches most standard camera and camcorder female...

RAM Mount 1.5" Diameter Ball Flat Surface Mount w/2.5" Round Base & Diamond BaseThe RAM-138U consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, double socket arm and diamond base adapter. The mount is designed with a 1...

1.5" Diameter Ball Mount with Long Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-D-2461 consists of a LONG double socket arm, 2.5" diameter round base with the universal AMPS hole...

RAM 1.5" Max Width Square Rail Base with 1" Diameter BallMaterial:Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball Size Note:The "U" in the part number reflects product packaged in poly bag.

RAM 1.5" Rail Mount w/Double U-Bolt Base & 3.625" Square Base (VESA 75mm x 75mm Hole Pattern)The RAM-334U consists of a double socket arm, 3.625" square plate with a 75mm X 75mm VESA hole pattern and stainless steel double u-bolt base that will fit...

RAM 1.5" Rail Mount with Double U-Bolt Base & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-334-1U consists of a double socket arm, 3.625" square base with the VESA hole pattern and stainless steel double u-bolt base that will fit pipes from...

Unpackaged Ram Wedge MountKeeping things simple and versatile, the new RAM Ball Wedge Mounts are a great way to provide a mounting point to practically anything. Simply slide the wedge into the round opening of your rod holder base and tighten the screw...

1.5" Tough-Ball™ with M6-1 X 6mm Male Threaded PostIntroducing the new RAM Tough-Ball™. Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and...

RAM 1.5" x 1.75" Base 5/16" Hole & 1" BallThis Mirror Plate with 1" Mounting Ball (RAM-B-126C) connects to the back of the RAM Convex Rearvision Mirror (RAM-B-126M) has dimensions 7" H x 14" L. The mounting ball allows the mirror to be connected to the...

RAM 1.5" x 2" Rectangle Base with 1" BallThe RAM-B-202U-152 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2" rectangular base, With a 1" x 1.5" 4-hole pattern. This mount has pre-drilled holes at each corner of the base plate...

RAM 1.5" x 2.5" Rectangle Base with 1" BallThe RAM-B-202U-1525 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated...

RAM 1.5" x 2.5" Rectangle Base with 1.5" BallThe RAM-202U-1525 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder...

RAM 1/4"-20 Female Threaded Hole with 1" BallThe RAM-B-348U includes a 1/4"-20 female thread connected to a 1" rubber ball. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects...

RAM 1/4"-20 x 2 1/4" Threaded Stud with 1" BallThe RAM-B-273U consists of a 1/4-20 threaded stainless steel bolt with 1 inch diameter ball. The threaded bolt is 2.5 inches long. Material: Powder Coated Marine Grade Aluminum Ball Size:1" Rubber Ball "B"...