Ram Mount Store

Description:The RAM-B-202U-RYM1 consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. The base has pre-drilled holes, including the universal AMPs hole pattern. Included are (3 quantity) (#8-32 x 3/4" PH PD Mach Screws) and (3...

RAM 1" Diameter Ball Flat Surface Mount w/ 2.5" Round Base & Diamond BaseDescription:The RAM-B-138U consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, double socket arm and diamond base adapter. The mount is designed...

RAM Twist Lock Suction Cup with Double Socket Arm and Diamond Base AdapterThe RAM-B-166U, twist lock suction cup mount consists of a 3.25" suction cup locking base and diamond plate end. The mount is designed with a RAM 1" diameter rubber ball and...

The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High...

RAM Base & Ball w/Garmin Mounting HardwareThe RAM-B-202-G2U, marine grade aluminum base, consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has a three hole pattern which will connect to the base of the Garmin...

RAM Base & Ball w/Garmin Mounting HardwareRAM-202-G2 universal base consists of a 1.5 inch diameter rubber ball, connected at right angles to a 2.5 inch diameter round base. The base has pre-drilled holes, including the universal AMPS hole pattern. The...

RAM Brake Clutch Reservoir Cover Motorcycle Mount (1" Ball Centered)The RAM-B-182U consists of a centered brake/clutch reservoir cover base, double socket arm and diamond adapter base. The diamond adapter base has a hole pattern that matches the...

C Size 1.5" Fishfinder Mount for the Lowrance Hook2 SeriesDesigned for heavy duty fresh water use, this C size (1.5”) aluminum drill-down kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts...

C Size 1.5" Fishfinder Ball Adapter for the Lowrance Hook2 SeriesDesigned for light duty use, this C size (1.5”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution...

RAM Yoke Clamp Base with 1" Rubber Ball The yoke clamp base will fit rails in diameter from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when connected to a rail, the ball sits parallel to the rail...

RAM Twist Lock Suction Cup Mount with 1" Ball Adapter that contains a 1/4"-20 Thread for CamerasThe RAM-B-166-237U consists of a 3.25" suction cup locking base, double socket arm and 1" rubber ball that contains a 1/4"-20 camera male thread. The male...

Center Loader for Top-Loading Aluminum Tough-Track™The Center Loader allows for the connection of two Extruded Aluminum Tough-Track™ systems in a straight line and provides a loading point to insert track bases. Hardware not included...

RAM 2.43" x 1.31" Chrome Diamond Base w/1" BallThe chrome plated base contains a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, positioned at both ends of the...

RAM Chrome Double Socket Arm for 1" Ball Bases - Overall Length: 3.69"The RAM-B-201CHU, chrome double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the...

RAM Chrome Motorcycle Brake/Clutch Reservoir Base w/1" BallThe RAM-B-309-1CHU connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The chrome base fits the control clamps on your motorcycle with...

The RAM combination handlebar and brake/clutch reservoir base provides the ultimate flexibility for mounting to your motorcycle. Mount to either your handlebar or brake/clutch, almost infinite adjustment and perfect viewing angles are provided in this...

Combination Brake/Clutch Reservoir U-Bolt Mount w/Universal X-Grip® Cell/iPhone CradleThe RAM-B-174-UN7U consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, double socket arm and...

Composite 1" Ball Short Length Double Socket Arm w/2.5" Round Base Including AMPs Hole PatternThe RAP-B-103U-A consists of a 2.5" round base and SHORT double socket arm that will accept 1" ball bases. The round base contains pre-drilled holes, including...

Composite 3.25" Diameter Suction Cup Base w/1" BallThe RAP-B-224-1U, composite twist lock mount consists of a 3.25" rubber base that is connected to the (RAP-B-238U), diamond base with 1" rubber ball. The suction cup is designed to have an extra strong...

Composite Ball Adapter with AMPS Plate The RAP-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, making the universal 1.5 x 1.188 (hole...

RAM Mount Composite Diamond Base w/1" BallPart #: RAP-B-238UThe RAP-B-238U, composite diamond base, contains a 1" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center,...

RAM Composite Double Socket Arm f/1" Ball BasesPart #: RAP-B-201UStandard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket...

Composite Drill-Down Double Ball Mount with Rectangle AMPS Plates This composite drill-down double ball mount features two AMPS hole pattern bases with 1" diameter balls. Each base has four pre-drilled holes at each corner with 1.5" x 1.188" hole...

RAM Composite Double Socket Mount with 2.5" Diameter Base and Diamond Ball Base AdaptorSimply choose your preferred mounting location and the possibilities become endless with the RAP-B-138U. Rubber ball and socket technology allows for almost infinite...

RAM Composite Handlebar Swivel BaseThe RAM high strength composite rail mount consists of a locking tooth system with a standard diamond plate end. The mount will accommodate rails up to 1" in diameter. The hole pattern found on the diamond base adapter...

RAM Composite Double Socket Mount Short Arm & with 2/1" Ball Diamond BasesThe RAP-B-102U-A consists of a short double socket arm and two 1" ball diamond bases. The diamond bases contain two holes 1.912" from center to center, positioned at both ends...

RAM Composite Double Socket Mount with 2/1" Ball Diamond BasesThe RAP-B-102U consists of a double socket arm and two 1" ball diamond bases. The diamond bases contain two holes 1.912" from center to center, positioned at both ends. The hole pattern found...

RAM Composite Twist Lock Suction Cup Mount w/ Diamond AdapterDescription:The RAP-B-166-2U consists of a 2.75" suction cup twist lock base, double socket arm and diamond base adapter. The suction cup base is designed to have a strong hold on glass and...

RAM Composite Twist Lock Suction Cup Mount with Short Arm and No Ball BaseBall Size: 1" Rubber BallMaterial: High Strength CompositeColor: Black

RAM Composite Twist Lock Suction Cup with Double Socket Arm and Diamond Base AdapterThe RAP-B-166U consists of a double socket arm, 3.25" suction cup twist lock base and diamond base adapter. The suction cup base is designed to have a strong hold on...

This RAM high strength composite cradle is designed to hold the following devices: Garmin Astro 220Garmin GPS 60Garmin GPSMAP 60Garmin GPSMAP 60CGarmin GPSMAP 60CSGarmin GPSMAP 60CSxGarmin GPSMAP 60Cx Material:High Strength Composite Note:The "U" in the...

RAM Cradle Holder for the Garmin dezl 560LMT & 560LTThis RAM high strength composite cradle is designed to hold the following devices: Garmin dezl 560LMT Garmin dezl 560LT Features: Open access to all electronic ports including audio port, speaker/mic...

RAM Cradle Holder f/Garmin nüvi 2557LMT, 2577LT & 2597LMTThis RAM high strength composite cradle is designed to hold the following devices: Garmin nüvi 2557LMTGarmin nüvi 2577LTGarmin nüvi 2597LMTFeatures:1. Open access to all...

D Size 2.25" Ball Mount with 2 - 3.68" Round Plate & Medium Length Double Socket ArmThe RAM-D-101U consists of (2 qty) 3.68" diameter round bases and STANDARD length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including...

D Size 2.25" Ball Mount with 2 qty 3.68" Round Plates & Short Length Double Socket ArmThe RAM-D-101U consists of (2 qty) 3.68" diameter round bases and SHORT length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including...

The RAM-D-201U-C, short double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost...

Dashboard Mount with Backing Plate for 7"-8" Tablets with CasesThe RAM® Tab-Tite™ bundle is a rugged mount including the RAM® Tab-Tite™, RAM® Universal Double Ball Mount with Two Round Plates, and RAM® Backing Plate Adapter...

Dashboard Mount with Backing Plate for 8" Tablets with CasesThis vehicle kit consists of a RAM® Tab-Tite™ spring-loaded holder for 8" tablets with a case, a medium B-size double socket arm, two 2.5" diameter round bases that contain the...

Dashboard Mount with Backing Plate for 9"-10.5" Tablets with CasesThis rugged dashboard tablet mount consists of a RAM® Tab-Tite™ spring loaded holder for any 9 in. -10.5 in. tablets with a case, a medium C-size double socket arm, two 2.5 in...

RAM Double 1" Ball Adapter The RAM-B-230U, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball center the arm length is 1.75". This mount is ideal if the...