Transducers

B117 Bronze Thru-Hull Low-Profile 600 W Blue ConnectorApplicationsPlaning hull powerboatsSailboatsFeaturesIndustry standard for low-profile transducersDepth and temperatureGood target detail in shallow-water at 200kHz and good deep-water bottom tracking...

Eagle SplitShot Transom Mount Transducer with 20 ft. CableWide Angle, High-Res Images Get the best underwater views below the boat with SplitShot HD, featuring the fish-finding capability of wide-angle high CHIRP sonar and the high-resolution...

ForwardScan Depth Transducer Only - No Sleeve or PlugKnow what lies ahead with ForwardScan. This compact transducer provides a forward-looking view of up to eight times your current depth, allowing you to navigate shallow or poorly-charted waters with...

RAA100 NMEA 2000®Rudder Angle AdapterThe RAA100 is used to adapt commercially available resistive rudder angle senders to the NMEA 2000® network. This allows you to observe rudder angle anywhere on the vessel where there is an NMEA 2000®...

Active Imaging HD 3-in-1 Fish Reveal (Dual) Thru Hull TransducersOur clearest sonar ever, Active Imaging™ HD Thru-Hull Transducer delivers the highest-definition views of Lowrance® CHIRP, SideScan, and DownScan Imaging™. Experience a new...

B164 12 degree 1kW Tilted ElementStep up to a 1kW-Without a Fairing! Airmar has taken our innovative TiltedElement™ technology to a higher power. The new 1kW, flush-mount, tiltedelement transducers are perfect for fast, trailered tournament sport...

B60 Thru Hull Transducer 12° Tilt, 9-Pin Xsonic Connector, Depth & TemperatureThe B60 is a 600 W, 50/200 kHz transducer that integrates Airmar’s popular, Tilted Element™ feature. This Tilted Element transducer has the ceramic element...

B60 Tilted Element™ 20°20° titled version is designed for 16° - 24° deadrise anglesThe bronze B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise...

B75H 20° Bronze Thru-Hull CHIRP xSonic 9-PinThe B75H is a bronze, thru-hull, tilted, high-frequency (130-210kHz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for...

DST-820 Plastic Thru-Hull Triducer Multisensor with 6M CableThe DST820 Smart Multisensor is the next evolution of Airmar’s industry-leading technology, replacing the DST810 and introducing PSTI compliance for enhanced onboard network security.With...

DT800 Plastic Depth Temp N2K 0°NMEA 2000 Depth/Temperature sensor with zero degrees (untilted) element. Includes a 51mm (2″) plastic flanged through-hull housing.The sensor uses standard PGNs and comes with Micro-C connectors enabling easy...

Shoot Thru-Hull Pod with Remote Temp - 9-PinNavico 9-Pin 83/200 kHz shoot-thru or trolling-motor mount Skimmer® with remote temp sensor with blue connector. Specifications:Cable Length (Feet): 20'Chirp: Medium/HighImagining: StandardMounting Style:...

XSONIC SS60 Stainless Steel Tilted Element Thru hull Transducer - 12°12° titled version is designed for 8° - 15° deadrise anglesFeatures:Depth/Temp50/200 kHz600w RMSMid-performanceStainless Steel Housing9 Pin Connector10M Cable...

B164 Tilted Element™0°Features:Depth/Temp50/200 kHz1 kW RMSHigh-performanceBronzeStep up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element...

B164 Tilted Element™12 degree titled version is designed for 8 degree - 15 degree deadrise anglesFor use with Raymarine DSM250 or DSM300 sounder modulesFeatures:Depth/Temp50/200 kHz1 kW RMSHigh-performanceBronzeStep up to a 1kWWithout a Fairing!...

Retractable Through Hull Active Depth Transducer. This Sensor allows simple connection to the T122 Wirless NMEA Interface for use in systems whre boat speed is available from a GPS. Operates at 235kHz. Features:2" diameter (51mm)Max. Hull thickness 2...

B175H-W 1KW Bronze Thru Hull 12° Tilted ElementFeatures:Installation: Thru HullMaterial: UrethanePower (RMS): 1kWMax Depth(ft): 800Frequency (KHz): 150-250Records: Depth and TemperatureApproved Hull Material: Fiberglass/WoodCable Length (ft/M):...

B175L Bronze Low Profile Thru Hull 20° Tilted Element Transducer 1kWFeaturesMaterial: BronzeFor use with CP450C or CP470 Chirp Sonar ModulePower (RMS): 1KwMax Depth(ft): 2,500Frequency (khZ): 40-60Beam Width(L/H): 32°-21°Records: Depth /...

Bronze High Performance Thru-Hull w/Fairing1000 Watt High Performance bronze through hull transducer with temperature. (B258) Fairing block includedCompatible with the following Echo Sounders: DSM250 and DSM300 SL Series: SL755RC, SL760RC , SL1250, and...

B744V 600 Watt Bronze thru hull transducer with depth, speed, and temperature.Compatible with the following sounder modules: DSM30 DSM300Compatible hull material: Wood and fiberglassMax power: 600 WFrequency: 200/50 kHzCable: 30ft (10m) cable with...

Long stem for hulls with steep deadrise or thicker cored hulls.Compatible with the following sounder modules: DSM30 DSM300Compatible hull material: Wood and fiberglass Max power: 600 watts Frequency: 200/50 kHzCable: 30ft (10m) cable with...

B75H Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer  - 600W Features:Depth / Temperature Through HullHull deadrise - 0º to 7ºFrequency: High 130-210 kHzPower: 600WHigh: 15-9 degree beamwidthHull type: Fiberglass...

CPT-120 Bronze High Speed Thru Hull Chirp Transducer with Fairing BlockRaymarine's exclusive line of DownVision transducers pair a conical CHIRP fishfinding element with a wide beam DownVision element. The result is an unrivaled level of subsurface...

CPT-70 Plastic Thru Hull TransducerUrethane Through Hull Transducer with Fairing Block. The CPT-70 requires A80332 Adapter Cable (if you have a green locking collar on the unit.)FeaturesPlastic Thru Hull Max Depth: DV=600ft/FF=900ftBeam Width:...

CPT-S High CHIRP Bronze Thru-Hull Flush Mount Transducer - 0° AngleThe CPT-S High CHIRP transducer provides high resolution sonar imagery in a small and inexpensive package. With a simple design, the CPT-S is easy to install, while still offering...

These transducers have been included as standard with mn100 T100 Speed and Depth systems since August 2004. Prior to this the T100 was supplied with the T905 Shorty Depth Transducer. Supplied with 6 meters of cable.Features:2" (51mm) diameterMax. Hull...

DT800 12-Degree Tilt Smart TransducerThe DT800 is a smart depth and temperature transducer for Raymarine instrument and chartplotter systems. Convenient SeaTalkng output allows you to plug this transducer directly into your network and receive accurate...

HV-100 HyperVision Transom Mount Transducer - 6M Cable - HV100.02 New VersionThe HyperVision 3D transducer provides a multitude of frequencies all within a single housing. Capable of simultaneously supplying RealVision 3D, DownVision, SideVision, and...

HV-300TH Plastic Transducer Thru-Hull Pair - 6M CableHV-300TH Plastic Thru-Hull Single (200kHz/350kHz/1.2MHz) Specifications:Imagining: Standard/Down/SideCable Length (Feet): 20'Mounting Style: Thru-HullSpeed Included: NoBox Dimensions: 12"H x...

Low Profile Plastic Depth OnlyDepth only low profile transducer (P319)Compatible with the following Echo Sounders: DSM250 and DSM300 and DSM30 SL Series: SL755RC, SL760RC , SL1250, and SL1250RC hsb2 Plus Series: L755RC, L760, L760RC, L1250,and L1250RC...

M260 In-hullThe M260 is our high performance in-hull model for 300 W-1 kW echosounders. Its construction utilizes separate 50 kHz and 200 kHz elements for excellent deep-water performance and exceptional bottom and water column detail. The M260s narrow...

M265LH 1kW Urethane In-Hull Transducer with In-Hull Mounting Kit The M265 is an outstanding in-hull option with 8 internal ceramics and up to 117kHz of total CHIRP range. The in-hull installation eliminates the need to drill any holes in the hull, while...

Compatible with the following: ST40 InstrumentsCompatible hull material: metal, wood, and fiberglassCable: 30ft (10m)Depth Only Specifications:Cable Length (Feet): 30'Mounting Style: TransomTemperature: NoSpeed Included: NoChirp: NoBox Dimensions:...

RV-220S RealVision 3D™ Starboard Side Thru-Hull CHIRP Bronze Transducer - 20° - 2M Cable - Replacement transducerThe RV-220 system features rugged cast-bronze thru-hull bodies suitable for fiberglass or wooden hulls. One transducer transmits...

RV-300 Plastic All-In-One 0° Thru-Hull TransducerRaymarine’s RV-300 Plastic All-In-One Thru-Hull Transducer is designed for inboard and outboard powerboats. The RV-300 lets you easily identify structures and locate fish with the life-like...

RV-312 RealVision™ 3D Transducers - Pair - Nylon Thru-Hull 12° DeadriseThe RV312 Thru-Hull Transducer from Raymarine provide RealVision Sonar to Compatible Axiom RV and Axiom PRO RVX Displays. View Structure and Fish with life-like quality of...

RVM-100 Transom Mount Transducer RVM-100 all-in-one transom mount transducer is designed for Raymarine RealVision MAX compatible sonar modules, and RealVision MAX equipped chartplotters.  The RVM-100 lets you easily identify structures and...

RVM-400 Stainless Steel Thru-Hull 0 Degree Deadrise & 8M CableRVM-400 series stainless steel all-in-one through hull transducer brings the power and clarity of RealVision MAX technology to inboard and outboard powerboats. The RVM-400 series...

These transducers have been included as standard with mn100 T100 Speed and Depth systems since August 2004. Prior to this the T100 was supplied with the T904 Shorty Speed Transducer. Supplied with 6 meters of cable.Features:Max. Hull thickness 2.125"...

SS164 Stainless Steel Thru-Hull - 0° Tilted Element - 1KW for CP370 SounderStep up to a 1 kW—without a fairing! Airmar’s innovative Tilted Element™ technology to a higher power. The 1 kW, flush-mount, tilted element transducer is...