Transducers

TM260-9N Transom Mount Transducer 1kW 50/200kHz 9-Pin for NavicoTM260 takes the legendary performance of the B260 to your vessel’s transom. This top-of-the-line 1kW transom-mount brings crystal clear imaging to any of today’s fishfinders...

TM265C-LH Transom Mount CHIRP - 1kW TransducerTransom-mounted 1kW dual-band CHIRP fishfinder transducer.The TM265 is available in the Low/Medium and Low/High bands. A Low/High widebeam model exists with the designation TM275.Specifications:Low/High...

TM265C-LM-12F Transom Mount Transducer with 12-Pin Connector for Furuno TZT12F, TZT16F & TZT19FRely on Airmar's broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler,...

UDST800 Smart, N2K, Bronze HSG, DSTAirmar’s patented UDST800 just turned your maintenance time into more cruising time—and made your boat smarter too. Get ultrasonic speed, depth, and temperature in a single-thru-hull housing with no moving...

UDST800P-N2 Ultrasonic Smart Sensor - N2KThe UDST800 just turned your maintenance time into more cruising time…and made your boat smarter too. Ultrasonic speed, depth, and temperature in one single housing with no moving parts make this sensor...

UST850 Smart Sensor NMEA 2000 - Plastic HousingAIRMAR's UST850 just turned your maintenance time into more cruising time…and made your boat smarter too. Ultrasonic speed and temperature in one single housing with no moving parts makes this sensor...

xSonic M135M Medium Chirp 1 kW In-Hull Transducer - 9-PinThe M135M’s medium frequency delivers the right combination of coverage under the boat, an extended depth range, and the ability to produce clean and accurate target and structure returns in...

B175L Bronze 0 Degree Thru-Hull 1kW for Garmin with 8-Pin ConnectorAirmar’s low-profile, Chirp-ready transducers are the perfect addition to smaller boats such as center consoles. The B175L transmits across low frequencies from 40 to 60 kHz,...

Spare 150kHz depth transducer with 7 meter cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Impellor unit without skin fitting Spare log impellor unit with 7 meter cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NMEA 2000 Transducer Smart Sensor DTS810This combination transducer gives you accurate information about depth, speed and water temperature. The transducer is supplied with a thru-hull / ground sleeve for installation in the bottom of the vessel. The...

Bronze Stem Thru-Hull CW Dual Frequency Transducer - 600W, 50/200kHzEchonautics presents a range of power transducers such as Dual Frequency CW with excellent value for money.Specifications:Bronze50/200kHz600WDual Frequency Transducer...

Bronze Stem Thru-Hull CW Dual-Frequency Transducer with Fairing Block - 600W, 50/200 kHzThe cost-effective choice is to get target detail in shallow water as well as good deep-water bottom tracking. The Echonautics CB101D600 is a stem-thru hull...

ST1801kW Thru-Hull Stainless Steel Transducer - 50/200 kHzFeatures:Type - CW DualFrequency - 50/200 kHzPower - 1kWTilt - 0 degreeHousing - Stainless SteelThread Diameter - 30mm/1.18" Specifications:Cable Length (Feet): 26'Mounting Style: Thru-HullPins:...

ST180D 1kW Thru-Hull Stainless Steel Transducer - 50/200kHzThe Echonautics ST180D is a low-profile, high-frequency CHIRP thru-hull transducer, ideal for enhancing the sonar capabilities of a boat. It is designed to provide detailed imaging and excellent...

Adjustable In-Hull Transducer This in-hull transducer has a patented adjustable feature which ensures that sound waves are transmitted vertically to the bottom on almost any hull with a deadrise up to 22°.  With no hull penetration,...

Transom Mount Transducer - 235kHzWith a low profile this depth unit offers little drag and easy installation for dead rise angles up to 30°. Recommended for boats up to 22' (7M) and speeds up to 55 knotsDesigned with a release bracket to...

165T/265LH-PM488 DFF3D CHIRP Combo Pocket Mount TransducerPocket Mount Combination TransducerThis transducer has housing (12 LX 5 W X 3.5 H) that contains the DFF3D elements along with the same CHIRP elements contained in B265LH.Features:DFF3D operating...

165T/275LHW Pocket Mount Combo Wide Beam Transducer for DFF3DThis is the housing (12L x 5W x 3.5H) that contains DFF3D elements along with CHIRP elements.Features:DFF3D operating frequency 165 kHzLow—CHIRPS from 42 kHz to 65 kHz, Beamwidth 25°...

165T/275LHW-12P Pocket Mount Combo Transducer for DFF3D & TZT3 DisplaysPocket Mount Combination TransducerThis is a new size housing (12 LX 5 W X 3.5 H) that contains DFF3D elements along with CHIRP elements.Standard FeaturesDFF3D operating...

B164 Tilted Element0 degree tilted version Features:Depth/Temp50/200 kHzHigh-performanceBronzeStep up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element...

B164 Tilted Element™ 10 Pin12°Features:Depth/Temp50/200 kHz1 kW RMSHigh-performanceBronzeStep up to a 1kWWithout a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted...

Bronze Thru-Hull, Digital Depth and High-Precision Temp Sensor, with 7 Inch Stem and High Speed Fairing Block (7-Pin) Features:200 Watts 235 kHz Bronze Thru-Hull with 7" Stem Depth and High-Precision Temperature ( + / - .02 degree ) 10-Meter Cable with...

Plastic Transom Mount, Digital Depth, Speed & Temp Sensor (7-Pin)200 Watts 235 kHz Plastic Transom Mount Depth, Speed and Temperature (+/ - 1 degree ) 10-Meter Cable with 7-Pin Connector WARNING: This product can expose you to chemicals which are known...

Plastic Thru-Hull, Digital Depth and Temp Sensor (7-Pin)200 Watts 235 kHz Plastic Thru-Hull Depth and Temperature (+/ - 1 degree ) 10-Meter Cable with 7-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of...

3kW Transducer - 50kHzExternal Install Type with FRP Housing, 3kW Power rating a frequency of 50kHz.Features:50kHz FRP Transducer3kW9 x 14 degree Directional Pattern15m Cable, no connectorWeight = 7.8kg160mm x 210mm x 96mmWARNING: This product can...

455T-PR903 Side-Scan Transducer Pair Thru-Hull for TZtouchXL SeriesThe 455T-PR903 is a set of paired Thru-Hull transducers that work with the built-in CHIRP Side-Scan functionality on your NavNet TZtouchXL TZT10X, TZT13X, or TZT16X MFD.Features:150...

455T-SS903 Side-Scan Thru-Hull Stainless for TZtouchXL SeriesThe 455T-SS903 is a Thru-Hull transducer that works with the built-in CHIRP Side-Scan functionality on your NavNet TZtouchXL TZT10X, TZT13X, or TZT16X MFD. Features:150 watts on each...

455T-TM903 Side-Scan Transducer Transom MountTransom Mount High-Frequency CHIRP Side-Scan Transducer for NavNet TZtouchXL. The 455T-TM903 is a Transom Mount transducer that works with the built-in CHIRP Side-Scan functionality on your NavNet TZtouchXL...

Bronze Thru-Hull Multisensor w/ 7 Inch Stem, 600w (10-Pin)600 Watts 50/200 kHz 40/10 degree Beam Angles Bronze Thru-Hull with 7' Stem, Speed and Temperature 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are...

Transom Mount Transducer w/ Temp, 1kW (10-Pin)M258 Transducer with Transom Mount Bracket 1 kW 50/200 kHz 14x23 degree/3x5 degree Beam Angles Transom Mount with Temperature 10 Meter Cable with 10-Pin Connector WARNING: This product can expose you to...

Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (8-Pin)600 Watts 50/200 kHz 40/10 degree Beam Angles Bronze Thru-Hull with Speed and Temperature 30 Foot Cable with 8-Pin Connector WARNING: This product can expose you to chemicals which...

Bronze Thru-Hull Multisensor with 7 Inch Stem, 600w (8-Pin)600 Watts 50/200 kHz 40/10 degree Beam Angles Bronze Thru-Hull with 7" Stem, Speed and Temperature 30 Foot Cable with 8-Pin Connector High Speed Fairing Block IncludedWARNING: This product can...

Urethane In-Hull Transducer, 1kW (10-pin), BroadbandThe 527ID-IHD is an in-hull transducer utilizing Broadband Technology.M260 Transducer with In-Hull Kit 1,000 Watts Power 50/200 kHz w/Diplexer 19/6 degree Beam Angles Plastic Transducer with In-Hull...

556TID-HDD SS260 Stainless Steel Thru-Hull Transducer w/Temp and Fairing Block - 10 Pin The SS260 is our best performing, stainless-steel, thru-hull stem for 1 kW echosounders. Its construction utilizes separate 50 kHz and 200 kHz elements for...

556TID-LTD/12 Stainless Steel Thru-Hull 1kW - 12° TiltedFuruno's Stainless Steel Thru-Hull Transducer, 1 kW (10 Pin), 12-degree Tilted Element. Airmar SS164 Housing Style Transducer.If a thru-hull flush-style, stainless steel transducer is...

B175HW CHIRP Bronze Thru-Hull 12° Tilt 1kW - 10-Pin ConnectorHigh-Frequency, Wide-Beam CHIRP Transducer with Temperature with Bronze Thru-Hull with 12° Tilt.Features:Power: 1kWFunction: Depth,TemperatureFrequency: 150-250 kHzMount Style:...

B275MWHW Bronze 1KW Thru Hull with Fairing Block & 12-Pin ConnectorThe B275MWHW combines medium and high frequencies into a single thru-hull model, advancing transducer design by delivering wider bottom coverage than any other 1 kW transducer...

B285HW CHIRP Bronze Transducer with FB 10-PinHigh-Frequency, Wide-Beam CHIRP Transducer with Temperature - Bronze Thru-Hull with High-Speed Fairing Block.Features:Power: 1kWFunction: Depth, TemperatureFrequency: 150-250 kHzMount Style: Thru-HullHousing...

B785M Bronze Thru-Hull Chirp Transducer with High Speed Fairing BlockFeatures:Frequency: Chirp 80 - 130 kHzPower Rating: 600 WattsConnector: 10 PinFairing Block: High Speed Fairing Block IncludedThis product may not be returned to the original point of...