Raymarine

These transducers have been included as standard with mn100 T100 Speed and Depth systems since August 2004. Prior to this the T100 was supplied with the T905 Shorty Depth Transducer. Supplied with 6...

These transducers have been included as standard with mn100 T100 Speed and Depth systems since August 2004. Prior to this the T100 was supplied with the T904 Shorty Speed Transducer. Supplied with...

This unique transmitter compensates for the movement of a rotating mast to ensure that you get the most accurate wind readings at all times. Operating as a wireless device on a Micronet network the...

Raymarine T121 Hull Transmitter*For multi-hulls, advanced Micronet technology allows your displays to use wind direction to automatically determine which hull transducer supplies the information you...

Wireless Wind TransmitterFor the first time, you can have wind information without running cables down the mast. The Wind Transmitter measures Wind Speed and Direction and sends data to any Micronet...

Not just a remote control, this is an independent, Micronet, wireless, palm sized display. With a dot matrix screen it not only shows you all the data in your system, but also incorporates a rolling...

Multifunction digital analogue display for the Micronet system. Shows Apparent or True Wind Speed and Direction along with CH/VMG, GPS and Heading Information.Key Features:No wiring - receives data...

The Dual Digital Display shows two lines of data simultaneously. It can be configured at any time to display any information provided by your transmitters and transducers.Key Features:No wiring -...

The Digital Display has a very large readout at 38mm and show a type that is available on the system. Custom pages may also be created using performance sailing software on a PC.Key Features:No...

Raymarine's new HD Digital radome scanners combine the power and clarity ofHD Digital signal processing with an ultra-compact scanner suitable for alltypes of vessels. Compatible with C-Series...

Raymarine's new HD Digital radome scanners combine the power and clarity ofHD Digital signal processing with an ultra-compact scanner suitable for all types of vessels. Compatible with C-Series...

Only 95g (0.21 lbs) Heel and pitch angle 30 degrees Calibration at the displays Quick Guide (pdf)Owner's Manual (pdf)

Compatible with the following: ST40 InstrumentsCompatible hull material: metal, wood, and fiberglassCable: 30ft (10m)Depth Only Specifications:Cable Length (Feet): 30'Mounting Style:...

Autopilot Backbone Cable KitThis autopilot backbone cable kit is required to connect the X-10, X-30, X-CAN and X-SOL corepacks to the ST70 Autopilot Control Head.Kit IncludesA06028 - STNG T-piece...

Compatible with the following instruments:ST70* ST60+ ST290Compatible hull material: Wood and FiberglassFrequency: 200 kHzCable: 45ft cableHole diameter for installation: 2"Note: E66023 Fairing...

RotaVecta Wind TransducerSupplied w/20M (65') CableCompatible Models:ST60+ST40 Specifications:Instrument Function: WindBox Dimensions: 5"H x 7"W x 21"L WT: 3 lbsUPC: 723193100509

i60 Wind Masthead only, no cables ONLY works with Raymarine st60 and i60 series wind displays. Specifications:Instrument Function: WindBox Dimensions: 4"H x 12"W x 20"L WT: 2.2...

Raymarine P66 Transom mount Transducer with 10m cableCompatible with the following: ST60+ Instruments ST290 Instruments ST70 Instruments*Compatible hull material: metal, wood and fiberglassCable:...

5-way SeaTalkng Connector used for connecting spurs to the backbone.

Adapter CableRaymarine adapter spur cable to connect an E-series display to a SeaTalkngnetwork, using the SeaTalk2 port on the back of the E-Series, 1.5M Specifications:Type: AdaptersBox Dimensions:...

Power CableRaymarine Power Cable for SeaTalkng Specifications:Type: Power CordsBox Dimensions: 1"H x 5"W x 7"L WT: 0.2 lbsUPC: 723193060490

Adapter CableRaymarine Adapter Cable for SeaTalk 2 to SeaTalkng Specifications:Type: AdaptersBox Dimensions: 1"H x 6"W x 7"L WT: 0.1 lbsUPC: 723193060483

Adapter CableRaymarine Adapter Cable for SeaTalk (1) to SeaTalkng Specifications:Type: AdaptersBox Dimensions: 1"H x 5"W x 7"L WT: 0.05 lbsUPC: 723193060476

Devicenet Male ADP Cable SeaTalkng to NMEA 2000Adapts SeaTalkng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems.Male: 1.5M cable Specifications:Connection...

Devicenet Female ADP Cable - SeaTalkng - NMEA 2000Adapts SeaTalkng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems.Female: 15.7" (0.4m)...

Spur CableRaymarine 3 meter stripped end Spur Cable for SeaTalkng Specifications:Cable Length (Meters): 3mBox Dimensions: 1"H x 4"W x 4"L WT: 0.3 lbsUPC: 723193060445

Spur CableRaymarine 1 meter stripped end Spur Cable for SeaTalkng Specifications:Cable Length (Meters): 1mBox Dimensions: 1"H x 3"W x 4"L WT: 0.2 lbsUPC: 723193060438

Spur CableRaymarine 400MM elbow Spur Cable for SeaTalkng Specifications:Cable Length (Meters): 400mmBox Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbsUPC: 723193060421

Spur CableRaymarine 3 meter Spur Cable for SeaTalkng Specifications:Cable Length (Meters): 3mBox Dimensions: 1"H x 7"W x 8"L WT: 0.5 lbsUPC: 723193060407

Spur CableRaymarine 1 meter Spur Cable for SeaTalkng Specifications:Connection Gender: Female-FemaleCable Length (Meters): 1mBox Dimensions: 1"H x 6"W x 7"L WT: 0.05 lbsUPC:...

Spur CableRaymarine 400MM Spur Cable for SeaTalkng Specifications:Cable Length (Meters): 400mmBox Dimensions: 1"H x 6"W x 7"L WT: 0.05 lbsUPC: 723193060384

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone...

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone...

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone...

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone...

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone...

Blanking Plug f/SeaTalk ngThis blanking plug is a blanking plug for the SeaTalkng. Place blanking plug in unused SeaTalkNG Spur sockets to protect them.

SeaTalkng Terminators attach at each end of SeaTalk backbone. Two are required per system.

SeaTalkng Backbone Extender for extending blue SeaTalkng Backbone Cables.

SeaTalkngT-Piece Connector. Used for connecting white SeaTalkng Spur Cables to Blue SeaTalkng Backbone Cables.