Lumishore ECLIPSE SL100 Blue Strip Light — 5M

Lumishore Strip Light

Lumishore ECLIPSE SL100 Blue Strip Light — 5M

A 5-meter IP68-rated flexible blue LED strip sold in a cut-and-seal reel, providing continuous accent illumination for cockpit coamings, under-gunwale channels, helm consoles, and swim platforms. This page keeps the reel dimensions, cut-and-seal process, and ECLIPSE compatibility high on the page so you can plan your installation before ordering.

Garmin authorized dealer

What's included

• ECLIPSE SL100 Blue Strip Light — 5 m reel
• Silicone adhesive end-cap sealing kit (blanking end cap + sealant)

Best fit

Best for continuous blue accent runs along cockpit coamings, under-gunwale channels, helm console edges, and transom surrounds on 12 V small to mid-size boats where a flat, low-profile strip is preferred over a rounded neon-tube appearance.

Why choose this strip light

• IP68 full-length seal: the entire strip is encapsulated and sealed for permanently wet and exposed marine areas — cockpit soles, exterior surfaces, and any continuously damp location.
• Cut-and-seal flexibility: field-trim to exact length at marked 30 mm cut points; the supplied silicone end-cap and sealant restore full IP68 waterproof integrity after cutting.
• 3M adhesive backing: self-adhesive for quick installation; optional stainless-steel mounting clips (60-0510, sold separately) for outdoor or high-vibration areas.
• 5 W/m, 12 V only: ~0.41 A/m; the ECLIPSE Command Center supports up to 20 m per zone at this draw level.
• Thin 12 mm × 5.2 mm cross-section: fits behind slim profiles and in tight channels where a neon-flex tube would not.
• Authorized dealer support: buy from MyGreenOutdoors with Garmin- and Lumishore-focused product help and fast shipping on qualifying orders.

Key specifications

Compatibility & control

The SL100 strip operates from any customer-supplied on/off switch wired to a 12 V fused circuit. For dimming, zone control, and MFD integration, it connects to the Lumishore ECLIPSE Command Center (60-0495). One ECLIPSE zone supports up to 20 m of SL100 strip; for longer runs, use multiple zones. The LUX SL/SNL 6-Core 2-Way Splitter (010-14465-00) allows one driver output to branch to two independent strip runs.

• Standalone switch control — 2-wire on/off switch; 12 V fused circuit
• ECLIPSE Command Center (60-0495) — dimming, zone grouping, strobe; up to 20 m per zone
• LUX SL/SNL 6-Core 2-Way Splitter (010-14465-00) — splits one output to two strip runs
• LUX SL/SNL Power Extension Cable (010-14457-00 = 3 m, 010-14459-00 = 5 m) — extends driver-to-strip cable reach

Compare related options

Use these if you need a different length, a neon-tube appearance, or a smaller quantity:

• ECLIPSE SL100 Blue — 1 m — for short accent runs under 1 m; same cut-and-seal capability
• ECLIPSE SL100 Blue — 2.5 m — mid-length option
• ECLIPSE SNL100 Neon Flex Blue — 1 m (010-04489-00) — choose this for a diffused neon-tube appearance rather than a flat strip glow

Frequently asked questions

Can I cut this strip to the exact length I need?
Yes. The SL100 can be field-cut at marked 30 mm cut points. After cutting, use the supplied silicone end-cap and sealant to re-seal the cut end. Allow 24 hours for the sealant to cure before handling or powering the strip.

What's the difference between the SL100 and the SNL100 Neon Flex?
The SL100 is a flat LED strip (12 mm × 5.2 mm) with individual LEDs visible when viewed directly; it's ideal for tight channels. The SNL100 Neon Flex (22 mm × 16 mm) encases the LEDs in a milky silicone extrusion for a uniform neon-tube glow with no visible hotspots. Choose SL100 for slim profiles; choose SNL100 where the fixture itself needs to look like a continuous neon tube.

Does this strip need a driver module?
No external driver is needed for basic on/off operation — wire directly to a 12 V switched fused circuit. The ECLIPSE Command Center acts as the zone controller/driver for dimming, zone grouping, and strobe.

Can I run the 5 m strip on one ECLIPSE zone?
Yes. The ECLIPSE Command Center supports up to 20 m per zone, so the 5 m reel is well within a single zone's capacity. You can run up to four 5 m reels on one zone.

What's the warranty?
Lumishore covers the ECLIPSE SL100 with a 3-year warranty. MyGreenOutdoors is a Garmin and Lumishore authorized dealer and can assist with warranty claims.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.