Lumishore ECLIPSE SNL100 Neon Flex Blue Light — 1M

Lumishore Neon Flex

Lumishore ECLIPSE SNL100 Neon Flex Blue Light — 1M

A 1-meter reel of IP68 silicone-jacketed blue LED neon flex producing a smooth, dot-free continuous glow — designed for cockpit coaming profiles, arch surrounds, and salon ceiling coves where the fixture itself should look like a true neon tube. This page keeps the cross-section, bend restrictions, cut-and-seal process, and ECLIPSE compatibility front and center before ordering.

Garmin authorized dealer

What's included

• ECLIPSE SNL100 Blue Neon Flex — 1 m reel
• Stainless-steel push-in mounting clips
• Silicone adhesive sealing kit (blanking end cap, 4 mm sponge cord, sealant)

Best fit

Best for decorative accent runs of 1 m or less in cockpit coaming channels, arch surrounds, transom faces, and salon ceiling coves where a seamless neon-tube appearance is required and individual LED hotspots are unacceptable.

Why choose this neon flex

• Silicone neon-tube extrusion: the milky silicone jacket completely hides individual LEDs and creates a smooth, uniform blue glow — the fixture looks like a continuous neon tube, not a strip of LED dots.
• IP68 full-length seal: sealed for permanently wet and exposed marine areas; rated for continuous moisture exposure.
• Stainless-steel push-in clips: clips fix to the surface first, then the Neon Flex clicks into place — cleaner than adhesive-only installation, recommended at 300 mm intervals with extra clips at bends.
• Cut-and-seal capability: field-trim at marked cut points; the supplied recoil-and-cap procedure restores full waterproof integrity after cutting.
• ECLIPSE Command Center compatible: up to 20 m per zone; supports dimming, zone grouping, and strobe when connected to the ECLIPSE Command Center (60-0495).
• Authorized dealer support: buy from MyGreenOutdoors with Garmin- and Lumishore-focused product help and fast shipping on qualifying orders.

Key specifications

Compatibility & control

The SNL100 Neon Flex operates from a customer-supplied on/off switch at 12 V or integrates into the Lumishore ECLIPSE Command Center for dimming, zone control, and strobe. Use the LUX SL/SNL 6-Core 2-Way Splitter (010-14465-00) to branch a single driver output to two separate neon-flex runs.

• Standalone switch control — 2-wire, 12 V fused circuit
• ECLIPSE Command Center (60-0495) — dimming, zone, strobe; up to 20 m per zone
• LUX SL/SNL 6-Core 2-Way Splitter (010-14465-00) — one-to-two output branch
• LUX SL/SNL Power Extension Cables (010-14457-00 / 010-14459-00) — driver-to-flex cable extension

Compare related options

Use these if you need a longer reel or a flat strip appearance instead of neon-tube:

• ECLIPSE SNL100 Neon Flex Blue — 2.5 m (60-0511-2500) — same fixture, longer reel for runs up to 2.5 m
• ECLIPSE SNL100 Neon Flex Blue — 5 m (60-0511-5000) — longest available reel
• ECLIPSE SL100 Blue Strip Light — 5 m (010-04479-00) — choose SL100 for a flat 12×5.2 mm strip profile in tight channels where the 22 mm neon tube does not fit

Frequently asked questions

Why is the SNL100 cut-and-seal process more involved than the SL100?
The SNL100's silicone extrusion holds the PCB under slight compression. After cutting, the PCB must be coiled back onto the reel to retract it from the cut end, then a 4 mm sponge cord is inserted and the silicone end cap is filled and pressed on. This recoil-and-cap procedure takes about 10–15 extra minutes compared to the SL100 end-cap process but achieves the same IP68 result.

Can the SNL100 bend around tight corners?
Side-bend only, with a minimum 120 mm radius — no vertical bending or twisting. For tighter curves than 120 mm, use the SL100 strip (50 mm minimum vertical bend radius) or make a cut and re-connect with a connector.

Does the SNL100 need a driver module?
No external driver is needed for on/off switch control. The ECLIPSE Command Center (60-0495) acts as zone controller for dimming, grouping, and strobe.

What spacing should I use for the mounting clips?
One clip every 300 mm as a minimum; use multiple clips around tight bends to prevent the neon flex from lifting off the surface under vibration or thermal expansion.

What's the warranty?
Lumishore covers the ECLIPSE SNL100 with a 3-year warranty. MyGreenOutdoors is a Garmin and Lumishore authorized dealer and can assist with warranty claims.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.