Lumishore MFD Conversion Cable for Simrad & B&G

Lumishore Accessory

Lumishore MFD Conversion Cable for Simrad & B&G

A purpose-built adapter cable that connects the Lumishore EOS-LUX or ECLIPSE Command Center to a Simrad, B&G, or Lowrance Navico-platform chartplotter network, enabling full MFD lighting control from the helm screen. This page keeps the supported MFD models and installation steps front and center before ordering.

Garmin authorized dealer

What's included

• One Lumishore MFD Conversion Cable for Simrad & B&G (RJ-45 to Navico Ethernet connector)

Best fit

Required for any Lumishore EOS-LUX or ECLIPSE Command Center installation on a vessel equipped with a Simrad, B&G, or Lowrance (Navico-platform) chartplotter from the compatibility list — this cable is the physical network adapter that enables helm-screen lighting control.

Why choose this cable

• Plug-and-play Navico integration: converts the Command Center's standard RJ-45 Ethernet port to the Navico Ethernet connector used by Simrad, B&G, and Lowrance — no additional adapters needed.
• One cable covers Simrad, B&G, and Lowrance: all three brands share the same Navico Ethernet connector standard, so this single cable supports all three.
• Compatible with both ECLIPSE and EOS-LUX Command Centers: works on both Lumishore control platforms.
• Required for Navico MFD installations: a standard RJ-45 patch cable will not fit Navico network ports; this adapter is required.
• Authorized dealer support: buy from MyGreenOutdoors with Garmin- and Lumishore-focused product help and fast shipping on qualifying orders.

Key specifications

MFD & display compatibility

This cable enables Lumi-Link integration with the following Navico-platform chartplotters. When adding an EOS-LUX-SUPRA Display to the same Navico network, a Navico NEP-2 Network Port Expander (sold by Navico) is required; in that case, install one 010-14454-00 cable from the Command Center to the NEP-2, and a second 010-14454-00 from the SUPRA Display to the NEP-2.

• Simrad — NSO evo3 / evo3S, NSS evo3 / evo3S, NSX series, IDS series, GO7 XSR / GO9 / GO12
• B&G — Zeus³ Glass Helm, Zeus³ 3S, Vulcan 7R / 9 / 12
• Lowrance — HDS Live, HDS Carbon, Elite FS

Frequently asked questions

Does this cable also work with Lowrance chartplotters?
Yes. Lowrance, Simrad, and B&G are all Navico brands sharing the same Ethernet connector standard. The MFD Conversion Cable for Simrad & B&G (010-14454-00) is the correct cable for all three brands. Supported Lowrance models are HDS Live, HDS Carbon, and Elite FS.

If I have both a Simrad NSS evo3 and need to add an EOS-LUX-SUPRA Display, how many of these cables do I need?
Two. One cable connects the EOS-LUX Command Center to the Navico NEP-2 Network Port Expander, and a second cable connects the EOS-LUX-SUPRA Display to the same NEP-2. The NEP-2 is sold separately by Navico.

Does this cable work with the ECLIPSE Command Center as well as the EOS-LUX Command Center?
Yes. This cable is compatible with both the ECLIPSE Command Center and the EOS-LUX Command Center (60-0366).

My Simrad model isn't on the list — will this cable work?
The Lumi-Link compatibility list is the official supported model list. If your Simrad or B&G model is not listed, MFD integration is not guaranteed. Contact us for the latest compatibility information.

What's the warranty?
Lumishore covers this cable with a 3-year warranty. MyGreenOutdoors is a Garmin and Lumishore authorized dealer and can assist with warranty claims.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.