Lumishore EOS TIX404 2 Lights, Hub, LUX Command Center, Display [010-04531-00]

Lumishore complete underwater lighting kit

Lumishore EOS TIX404 — 2 Lights, Hub, LUX Command Center & Display

The most complete EOS TIX404 package available: two full RGBW interchangeable thru-hull lights plus an i-Connect Hub, EOS-LUX Command Center, and dedicated EOS-LUX-SUPRA Display — everything needed for plug-and-play Garmin MFD integration and standalone touchscreen control.

Garmin authorized dealer

What’s included

• Two (2) EOS TIX404 thru-hull lights with built-in multi-channel drivers — RGBW, 7,500 fixture lumens (white) each, 110° beam angle
• One (1) EOS i-Connect Hub (PN 60-0321) — supports up to 4 lights; includes switch terminator and 1 m DMX cable
• One (1) EOS-LUX Command Center (PN 60-0366) — enables MFD, Wi-Fi, and OTA control
• One (1) EOS-LUX-SUPRA Display (PN 60-0369) — dedicated glass-bridge-style touchscreen with rotary dial and built-in Wi-Fi for standalone control
• One (1) 5 m DMX cable (hub to command center)
• Two (2) × 3 m pre-installed plug-and-play cables (one per light)
• Mounting hardware and installation gaskets
• Installation and operation manuals

Best fit

The flagship turn-key EOS TIX404 package for sportboat, express cruiser, and performance vessel owners (7–18 m / 23–59 ft) who want a complete, ready-to-install RGBW underwater lighting system with a dedicated touchscreen display, MFD integration (Garmin, Raymarine, Simrad, B&G, Furuno), Wi-Fi smartphone control, and inside-hull serviceability — all in one box. Only the MFD-specific conversion cable is sold separately.

Why choose this Lumishore complete kit

• Complete system in one box: 2 lights + hub + command center + dedicated display; the only additional purchase required for Garmin MFD integration is the conversion cable (PN 60-0372, sold separately).
• Includes Lumishore Display for standalone control: the EOS-LUX-SUPRA Display provides dedicated glass-bridge-style touchscreen and rotary-dial control independently of any MFD — ideal when using the boat without the helm station powered.
• TIX interchangeable design: both light modules pull from inside the hull for service or swap without haulout, diver, or dry-dock time.
• Full RGBW EOS color spectrum: scenes, zones, color cycle, color sweep, strobe, sound-to-light, and OTA firmware via EOS-LUX Command Center.
• Best value add vs. buying components separately: this kit saves versus purchasing 2×TIX404 + hub + command center + display individually.
• Authorized dealer support: buy from MyGreenOutdoors with Garmin- and Lumishore-focused product help and fast shipping on qualifying orders.

Key specifications

Compatibility & control

The included EOS-LUX Command Center (PN 60-0366) enables full MFD integration. Compatible displays include:

• Garmin — OneHelm-enabled MFDs (GPSMAP 8400, 8600, 9x3, 10x3 series and others) via Garmin Conversion Cable (PN 60-0372, sold separately)
• Raymarine — Axiom, Axiom Pro, Axiom XL series
• Simrad / Navico — NSO and NSS EVO2/3 via conversion cable PN 60-0373 (sold separately)
• B&G — Zeus3 and Zeus3 Glass Helm via conversion cable PN 60-0373 (sold separately)
• Furuno — NavNet TZtouch3 via SD card PN 60-0377 (sold separately)
• EOS-LUX-SUPRA Display (included) — standalone touchscreen + rotary dial with built-in Wi-Fi; no MFD required for full control
• Smartphone / tablet — Wi-Fi control via MFD or the included display’s built-in Wi-Fi; also Lowrance and Johnson Outdoors MFDs supported

No NMEA 2000 required. The included hub supports up to 4 lights total; additional lights can be added up to system capacity.

Compare related options

• EOS TIX404 2-light kit without Display (010-04530-00) — same 2-light hub + command center kit, minus the dedicated EOS-LUX-SUPRA Display; saves ~$550 for MFD-centric installations
• LUX SMX154 2-light kit with Display (010-04511-00) — similar complete kit with surface-mount SMX154 lights instead of thru-hull TIX404; no hull penetration required
• EOS TIX804 (010-04532-00) — single larger thru-hull with 12,000 lm RGBW for installations requiring higher output per fixture
• Garmin Conversion Cable (PN 60-0372) — needed for Garmin MFD integration; sold separately

Frequently asked questions

Does this kit include everything I need to get started?
Almost. The kit includes the 2 lights, hub, command center, and dedicated display. If you want to control the lights from your Garmin MFD, you will also need the Garmin Conversion Cable (PN 60-0372, sold separately). For Simrad/B&G, add PN 60-0373; for Furuno, add SD card PN 60-0377. All standard installation tools and electrical runs are the installer’s responsibility.

Do I need an MFD to use this kit?
No. The included EOS-LUX-SUPRA Display provides complete standalone control via its touchscreen, rotary dial, and built-in Wi-Fi — no chartplotter required.

Is this a Garmin product?
Yes. Garmin acquired Lumishore in October 2024. This kit now carries Garmin MPN 010-04531-00 and is sold under the Garmin/Lumishore brand. The hardware and design are unchanged.

Can I add more lights later?
Yes. The included hub supports up to 4 lights. A second hub (PN 60-0321) can be added to support up to 4 more lights, and the system scales further with additional hubs.

What size hull cutout do the TIX404 lights require?
Each light requires a 57 mm (2.25") hull bore. With the optional Delrin isolation sleeve, the bore is 64 mm (2.5"). The light face is 88 mm in diameter with an 8 mm housing profile.

Can the lights be serviced without hauling the boat?
Yes. The TIX interchangeable module pulls from inside the hull — no haulout, no diver, and no external hull work required.

What is the warranty?
Lumishore (Garmin) covers all components with a 3-year warranty. MyGreenOutdoors is an authorized Garmin and Lumishore dealer — contact us for warranty support in North America.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.