Lumishore EOS-LUX Command Center [010-04360-00]

Lumishore Command Center

Lumishore EOS-LUX Command Center

The central control hub for Lumishore EOS underwater and LUX above-water lighting systems — enables full-spectrum color management, zone control, lighting scenes, and Over-the-Air firmware updates via Garmin OneHelm MFD, EOS-LUX-SUPRA Display, or built-in Wi-Fi smart device control.

Garmin authorized dealer

What's included

• One (1) EOS-LUX Command Center unit (MPN 010-04360-00)
• DMX Terminator (PN 24-0087)

Best fit

Best for yacht and sport-boat owners running a full Lumishore EOS underwater and/or LUX above-water lighting installation who want seamless, integrated color control from a Garmin, Raymarine, Simrad, B&G, Lowrance, or Furuno MFD — or from a smartphone via Wi-Fi — through a single compact hub. Required for all EOS series and all LUX above-water lights (excluding SMX93).

Why choose this Lumishore command center

• Required hub for EOS & LUX systems: the EOS-LUX Command Center is the only device that unlocks full-feature color control, zone management, and lighting scenes for the complete EOS and LUX product lineup.
• Cross-platform MFD compatibility: connects to Garmin OneHelm-enabled chartplotters (via Garmin Marine Network Cable — not generic Ethernet), Raymarine Axiom (Lighthouse Partner App), Navico/Simrad NSO/NSS evo3, B&G Zeus³, Lowrance HDS Live, and Furuno Navnet TZtouch3 from a single unit.
• Over-the-Air (OTA) firmware updates: connect to a laptop or PC via the built-in Wi-Fi hotspot to receive new features and improvements without removing the unit (firmware v1.9 and later).
• Sound-to-Light & programmable triggers: the Auto DJ mode adjusts sensitivity for song transitions; a 3.5 mm audio jack input and dedicated trigger inputs allow automated, mood-matched lighting events.
• Reverse polarity, load dump, and ignition protection: ISO 8846 ignition-protected ABS enclosure (IP67) handles 10.5–31 V DC for 12 V or 24 V systems with max 0.5 A draw.
• Authorized dealer support: buy from MyGreenOutdoors with Garmin- and Lumishore-focused product help and fast shipping on qualifying orders.

Key specifications

Compatibility & control

The EOS-LUX Command Center provides full-feature control of the complete Lumishore EOS and LUX product lineup from a wide range of MFDs and smart devices. MFD connection uses the Garmin Marine Network (proprietary Ethernet) — not NMEA 2000 or generic Ethernet.

• Garmin (OneHelm) — GPSMAP 8400, 8600, 8700 series and any OneHelm-enabled chartplotter; requires Garmin Conversion Cable PN 60-0372 + Garmin Marine Network Cable
• Raymarine — Axiom, Axiom Pro, Axiom XL (Lighthouse Partner App)
• Navico / Simrad — NSO evo3/3S, NSS evo3/3S, NSX, IDS, GO7 XSR, GO9, GO12
• B&G — Zeus³ Glass Helm, Zeus³, Zeus³S, Vulcan 7R/9/12
• Lowrance — HDS Live, HDS Carbon, Elite FS
• Furuno — Navnet TZtouch3 (requires SD card PN 60-0377)
• Smart device (Wi-Fi) — any iOS or Android device via the Command Center Wi-Fi hotspot, independent of MFD
• EOS-LUX-SUPRA Display — optional dedicated control panel, used in addition to or instead of an MFD

Compare related options

• EOS-LUX-SUPRA Display (010-04362-00) — optional IP68-rated 3.5" touchscreen + rotary dial panel for helm-side control without opening an MFD app; pairs directly with the Command Center
• SUPRA Bridge Module (010-04361-00) — the equivalent bridge for SUPRA-series (dual-color) lights; choose the Command Center for EOS/LUX, the Bridge Module for SUPRA-only builds
• SUPRA i-Connect Hub Kit (010-04356-00) — the power and distribution hub required upstream of the Bridge Module in any SUPRA installation

Frequently asked questions

Does the EOS-LUX Command Center use NMEA 2000 to connect to Garmin MFDs?
No. Lumishore uses the Garmin Marine Network (proprietary Ethernet), not NMEA 2000. A Garmin Conversion Cable (PN 60-0372) and a Garmin Marine Network Cable are required to integrate with Garmin OneHelm-enabled chartplotters.

Is the EOS-LUX Command Center required, or can I use the SUPRA Bridge Module instead?
They serve different product lines. The EOS-LUX Command Center is required for all EOS-series underwater lights and all LUX above-water lights. The SUPRA Bridge Module adds MFD control to SUPRA-series (dual-color) lights. If you have a mixed EOS + SUPRA installation, you need the Command Center; the Bridge Module is used for SUPRA-only builds.

What Garmin MFDs are compatible?
Any Garmin MFD with OneHelm (Garmin Marine Network) support is compatible, including the GPSMAP 8400, 8600, and 8700 series. The Command Center also works with Raymarine Axiom, Navico/Simrad NSO/NSS evo3, B&G Zeus³, Lowrance HDS Live, and Furuno Navnet TZtouch3.

Can I control the lights from my phone without using the MFD?
Yes. The EOS-LUX Command Center has built-in Wi-Fi. Connect your smartphone, tablet, or laptop to the Command Center's hotspot and control all zones and scenes independently — the MFD can be off entirely.

What does "Over-the-Air firmware update" mean in practice?
With firmware v1.9 and later, you connect a laptop to the Command Center's Wi-Fi network and run the update through a browser-based interface — no USB cable, no unit removal, no service call required.

Is the EOS-LUX Command Center the same product as the Garmin Lumishore Command Center?
Yes. Garmin acquired Lumishore in October 2024. The EOS-LUX Command Center now carries Garmin MPN 010-04360-00 and is supported through Garmin's service network. Hardware and functionality are unchanged — it is the same Lumishore EOS-LUX Command Center, now sold under the Garmin/Lumishore brand.

How many lights can one Command Center support?
The EOS-LUX Command Center supports 85+ nodes and 1,000+ lights per unit — sufficient for virtually any recreational or commercial vessel lighting build.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.